Professional Documents
Culture Documents
• Run the GlobalProtect installer. Select Next > Next > Next and the program will start
installing. If/When asked, allow the program to make changes to your system.
• Once the GlobalProtect program has finished installing, open the Start menu and look for
the newly created Palo Alto folder and run the GlobalProtect program.
• Enter the portal as vpn.uow.edu.au and click Connect. You may have to click Connect a
second time.
Enter your UOW username and password and click Sign In. After a short wait the VPN connection
will be established.
2. How to install PTC Creo Parametric 5.0
(i) Download and install the basic PTC Creo Parametric 5.0 program
• On the login window that appears, enter your username in the format aduow\username and your
UOW password (you may have to click Other User to enter the username)
• Click OK
• The below window will appear
• In the application list, deselect all the applications you do not need, ensure 'Enable
diagnostic data collection for these applications' is ticked, then click Install.
• After the installation is complete, click Finish and move on to configure the program.
(ii) Configure the program so that it operates effectively
(move to the next step of already configured)
• Inside of the Creo 5.0 folder there is a ZIP file currently called Configuration Files
May2020.zip. Unzip this folder
• Right click and copy the UOW_CreoParametric_Config_Support_Files folder from within and
then navigate to C:\ on your PC and paste.
• Go back to the unzipped Configuration Files May2020 and right click and copy the
config.pro file
• Navigate to C:\Program Files\PTC\Creo 5.0.2.0\Common Files\text and paste. Select to
overwrite the existing file.
Alternatively, with a VPN connection established, you can borrow a license for offline usage for up to
5 days using the method below. If you have issues with this method, you can always continue to use
PTC Creo with the VPN established.
Make sure that every time you use the software that you have first established a single level
directory, a project folder, and make that your working directory as the first action when once you
have started the program.
Support
PTC Creo is written for computers running Microsoft’s Windows operating system and is not
supported on MacOSX. Below are some methods that you can attempt to get PTC Creo 5.0 to run on
MacOSX.
Recent Apple computers are built around the same Intel chipsets as PCs providing two methods of
installing and running PTC Creo.
Dual boot
A license for MS Windows is purchased and the Apple computer is set up with two boot options;
MacOSX or Windows. When booted into windows, PTC Creo can be installed and run.
Windows emulation
There are a number of Windows emulators for Apple computers. Parallels Desktop for Mac can be
purchased through IMTS.
Install Parallels or similar. It creates a partitioned drive for you to run windows through and then you
install software (Creo, Mathcad etc.) as normal.
Graphics performance
All 3D modelling software makes heavy demands on computer graphics cards. On some computers
settings in the graphics card may need to be changed to get PTC Creo to work efficiently. In some
situations PTC Creo may need to be reconfigured.