Professional Documents
Culture Documents
And Cepstrum Analysis of Rail Acceleration
And Cepstrum Analysis of Rail Acceleration
Andersson, C., & Johansson, A. (2004). Prediction of rail corrugation generated by three-dimensional
wheel-rail interaction. Wear, 257(3–4), 423–434. https://doi.org/10.1016/j.wear.2004.01.006
Baeza, L., Vila, P., Roda, A., & Fayos, J. (2008). Prediction of corrugation in rails using a non-stationary
wheel-rail contact model. Wear, 265(9–10), 1156–1162.
https://doi.org/10.1016/j.wear.2008.01.024
Bogacz, R., & Kowalska, Z. (2001). Computer simulation of the interaction between a wheel and a
corrugated rail. In Eur. J. Mech. A/Solids (Vol. 20).
Böhmer, A., & Klimpel, T. (2002). Plastic deformation of corrugated rails-a numerical approach using
material data of rail steel. In Wear (Vol. 253).
Bracciali, A., & Cascini, G. (n.d.). Detection of corrugation and wheelflats of railway wheels using energy
and cepstrum analysis of rail acceleration.
Chen, G. X., Zhang, S., Wu, B. W., Zhao, X. N., Wen, Z. F., Ouyang, H., & Zhu, M. H. (2020). Field
measurement and model prediction of rail corrugation. Proceedings of the Institution of
Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 234(4), 381–392.
https://doi.org/10.1177/0954409719877318
Chen, G. X., Zhou, Z. R., Ouyang, H., Jin, X. S., Zhu, M. H., & Liu, Q. Y. (2010). A finite element study on
rail corrugation based on saturated creep force-induced self-excited vibration of a wheelsettrack
system. Journal of Sound and Vibration, 329(22), 4643–4655.
https://doi.org/10.1016/j.jsv.2010.05.011
Clark, R. A., & Dean, P. A. (n.d.-a). AN INVESTIGATION INTO THE DYNAMIC EFFECTS OF RAILWAY
VEHICLES RUNNING ON CORRUGATED RAILS.
Clark, R. A., & Dean, P. A. (n.d.-b). AN INVESTIGATION INTO THE DYNAMIC EFFECTS OF RAILWAY
VEHICLES RUNNING ON CORRUGATED RAILS.
Correa, N., Oyarzabal, O., Vadillo, E. G., Santamaria, J., & Gomez, J. (2011). Rail corrugation
development in high speed lines. Wear, 271(9–10), 2438–2447.
https://doi.org/10.1016/j.wear.2010.12.028
Cui, X., Chen, G., Zhao, J., Yan, W., Ouyang, H., & Zhu, M. (2017). Field investigation and numerical study
of the rail corrugation caused by frictional self-excited vibration. Wear, 376–377, 1919–1929.
https://doi.org/10.1016/j.wear.2017.01.089
Cui, X. L., Chen, G. X., Yang, H. G., Zhang, Q., Ouyang, H., & Zhu, M. H. (2016). Study on rail corrugation
of a metro tangential track with Cologne-egg type fasteners. Vehicle System Dynamics, 54(3), 353–
369. https://doi.org/10.1080/00423114.2015.1137955
Daniel, W. J. T., Horwood, R. J., Meehan, P. A., & Wheatley, N. (2008). Analysis of rail corrugation in
cornering. Wear, 265(9–10), 1183–1192. https://doi.org/10.1016/j.wear.2008.02.030
Eadie, D. T., & Santoro, M. (2006a). Top-of-rail friction control for curve noise mitigation and
corrugation rate reduction. Journal of Sound and Vibration, 293(3–5), 747–757.
https://doi.org/10.1016/j.jsv.2005.12.007
Eadie, D. T., & Santoro, M. (2006b). Top-of-rail friction control for curve noise mitigation and
corrugation rate reduction. Journal of Sound and Vibration, 293(3–5), 747–757.
https://doi.org/10.1016/j.jsv.2005.12.007
Eadie, Donald T, Kalousek, J., & Chiddick, K. C. (2002). The role of high positive friction (HPF) modifier in
the control of short pitch corrugations and related phenomena. In Wear (Vol. 253).
Egana, J. I., Vinolas, J., & Seco, M. (2006a). Investigation of the influence of rail pad stiffness on rail
corrugation on a transit system. Wear, 261(2), 216–224.
https://doi.org/10.1016/j.wear.2005.10.004
Egana, J. I., Vinolas, J., & Seco, M. (2006b). Investigation of the influence of rail pad stiffness on rail
corrugation on a transit system. Wear, 261(2), 216–224.
https://doi.org/10.1016/j.wear.2005.10.004
Gómez, I., & Vadillo, E. G. (2003). A linear model to explain short pitch corrugation on rails. Wear,
255(7–12), 1127–1142. https://doi.org/10.1016/S0043-1648(03)00282-5
Grassie, S. L. (2009a). Rail corrugation: Characteristics, causes, and treatments. Proceedings of the
Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 223(6), 581–596.
https://doi.org/10.1243/09544097JRRT264
Grassie, S. L. (2009b). Rail corrugation: Characteristics, causes, and treatments. Proceedings of the
Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 223(6), 581–596.
https://doi.org/10.1243/09544097JRRT264
Grassie, S. L., & Kalousek, J. (1993a). Rail Corrugation: Characteristics, Causes and Treatments.
Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit,
207(1), 57–68. https://doi.org/10.1243/PIME_PROC_1993_207_227_02
Grassie, S. L., & Kalousek, J. (1993b). Rail Corrugation: Characteristics, Causes and Treatments.
Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit,
207(1), 57–68. https://doi.org/10.1243/PIME_PROC_1993_207_227_02
Grassie, Stuart L. (1996). Short wavelength rail corrugation: field trials and measuring technology. In
Wear (Vol. 191). ELSEVIER.
Grassie, Stuart L. (2012a). Rail irregularities, corrugation and acoustic roughness: Characteristics,
significance and effects of reprofiling. Proceedings of the Institution of Mechanical Engineers, Part
F: Journal of Rail and Rapid Transit, 226(5), 542–557. https://doi.org/10.1177/0954409712443492
Grassie, Stuart L. (2012b). Rail irregularities, corrugation and acoustic roughness: Characteristics,
significance and effects of reprofiling. Proceedings of the Institution of Mechanical Engineers, Part
F: Journal of Rail and Rapid Transit, 226(5), 542–557. https://doi.org/10.1177/0954409712443492
Grassie, Stuart L. (2005a). Rail corrugation: Advances in measurement, understanding and treatment.
Wear, 258(7–8), 1224–1234. https://doi.org/10.1016/j.wear.2004.03.066
Grassie, Stuart L. (2005b). Rail corrugation: Advances in measurement, understanding and treatment.
Wear, 258(7–8), 1224–1234. https://doi.org/10.1016/j.wear.2004.03.066
Grassie, Stuart L., & Elkins, J. A. (1998). Rail corrugation on North American transit systems. Vehicle
System Dynamics, 29(SUPPL.), 5–17. https://doi.org/10.1080/00423119808969548
Han, J., Xiao, X., Wu, Y., Wen, Z., & Zhao, G. (2018). Effect of rail corrugation on metro interior noise and
its control. Applied Acoustics, 130, 63–70. https://doi.org/10.1016/j.apacoust.2017.09.007
Hempelmann, K., & Knothe, K. (1996a). An extended linear model for the prediction of short pitch
corrugation. In Wear (Vol. 191). ELSEVIER.
Hempelmann, K., & Knothe, K. (1996b). An extended linear model for the prediction of short pitch
corrugation. In Wear (Vol. 191). ELSEVIER.
Hiensch, M., Nielsen, J. C. O., & Verheijen, E. (2002a). Rail corrugation in The Netherlands-
measurements and simulations. In Wear (Vol. 253).
Hiensch, M., Nielsen, J. C. O., & Verheijen, E. (2002b). Rail corrugation in The Netherlands-
measurements and simulations. In Wear (Vol. 253).
Huang, W., Zhang, W., Du, Y., Sun, B., Ma, H., & Li, F. (2013). Detection of rail corrugation based on fiber
laser accelerometers. Measurement Science and Technology, 24(9). https://doi.org/10.1088/0957-
0233/24/9/094014
Igeland " ’, A. (1997a). WEAR Rail head corrugation growth predictions based on non-linear high
frequency vehicle/track interaction. In Wear (Vol. 213).
Igeland " ’, A. (1997b). WEAR Rail head corrugation growth predictions based on non-linear high
frequency vehicle/track interaction. In Wear (Vol. 213).
Ishida, M., Akama, M., Kashiwaya, K., & Kapoor, A. (n.d.). The current status of theory and practice on
rail integrity in Japanese railways-rolling contact fatigue and corrugations.
Ishida, M., Moto, T., & Takikawa, M. (2002). The effect of lateral creepage force on rail corrugation on
low rail at sharp curves. In Wear (Vol. 253).
Jin, X. S., Wen, Z. F., Wang, K. Y., Zhou, Z. R., Liu, Q. Y., & Li, C. H. (2006a). Three-dimensional train-track
model for study of rail corrugation. Journal of Sound and Vibration, 293(3–5), 830–855.
https://doi.org/10.1016/j.jsv.2005.12.013
Jin, X. S., Wen, Z. F., Wang, K. Y., Zhou, Z. R., Liu, Q. Y., & Li, C. H. (2006b). Three-dimensional train-track
model for study of rail corrugation. Journal of Sound and Vibration, 293(3–5), 830–855.
https://doi.org/10.1016/j.jsv.2005.12.013
Jin, X., Wen, Z., Wang, K., & Zhang, W. (2004). Effect of a scratch on curved rail on initiation and
evolution of rail corrugation. Tribology International, 37(5), 385–394.
https://doi.org/10.1016/j.triboint.2003.07.002
Jin, X., Xiao, X., Wen, Z., & Zhou, Z. (2008). Effect of sleeper pitch on rail corrugation at a tangent track in
vehicle hunting. Wear, 265(9–10), 1163–1175. https://doi.org/10.1016/j.wear.2008.01.028
Johansson, A., & Nielsen, J. C. O. (2007). Rail corrugation growth-Influence of powered wheelsets with
wheel tread irregularities. Wear, 262(11–12), 1296–1307.
https://doi.org/10.1016/j.wear.2007.01.004
Kalousek, J., & Johnson, K. L. (n.d.-a). An investigation of short pitch wheel and rail corrugations on the
Vancouver mass transit system.
Kalousek, J., & Johnson, K. L. (n.d.-b). An investigation of short pitch wheel and rail corrugations on the
Vancouver mass transit system.
Knothe, K., & Groß-Thebing, A. (2008a). Short wavelength rail corrugation and non-steady-state contact
mechanics. Vehicle System Dynamics, 46(1–2), 49–66.
https://doi.org/10.1080/00423110701590180
Knothe, K., & Groß-Thebing, A. (2008b). Short wavelength rail corrugation and non-steady-state contact
mechanics. Vehicle System Dynamics, 46(1–2), 49–66.
https://doi.org/10.1080/00423110701590180
Li, W., Wang, H., Wen, Z., Du, X., Wu, L., Li, X., & Jin, X. (2015). An investigation into the mechanism of
metro rail corrugation using experimental and theoretical methods. Proceedings of the Institution
of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 230(4), 1025–1039.
https://doi.org/10.1177/0954409715596182
Liu, Q. Y., Zhang, B., & Zhou, Z. R. (2003a). An experimental study of rail corrugation. Wear, 255(7–12),
1121–1126. https://doi.org/10.1016/S0043-1648(03)00213-8
Liu, Q. Y., Zhang, B., & Zhou, Z. R. (2003b). An experimental study of rail corrugation. Wear, 255(7–12),
1121–1126. https://doi.org/10.1016/S0043-1648(03)00213-8
Matsumoto, A., Sato, Y., Ono, H., Tanimoto, M., Oka, Y., & Miyauchi, E. (2002). Formation mechanism
and countermeasures of rail corrugation on curved track. In Wear (Vol. 253).
Matsumoto, A., Sato, Y., Tanimoto, M., & Qi, K. (1996). Study on the formation mechanism of rail
corrugation on curved track. Vehicle System Dynamics, 25(SUPPL.), 450–465.
https://doi.org/10.1080/00423119608969213
Meehan, P. A., Daniel, W. J. T., & Campey, T. (2005). Prediction of the growth of wear-type rail
corrugation. Wear, 258(7–8), 1001–1013. https://doi.org/10.1016/j.wear.2004.03.049
Mu, S., & Ller, È. (n.d.). A LINEAR WHEEL^TRACK MODEL TO PREDICT INSTABILITY AND SHORT PITCH
CORRUGATION. http://www.idealibrary.com
Nielsen, J. B. (n.d.). EVOLUTION OF RAIL CORRUGATION PREDICTED WITH A NON-LINEAR WEAR MODEL.
http://www.idealibrary.com
Nielsen, J. C. O. (2003). Numerical prediction of rail roughness growth on tangent railway tracks. Journal
of Sound and Vibration, 267(3), 537–548. https://doi.org/10.1016/S0022-460X(03)00713-2
Nielsen, J. C. O., Ekberg, A., & Lundén, R. (2005). Influence of short-pitch wheel/rail corrugation on
rolling contact fatigue of railway wheels. Proceedings of the Institution of Mechanical Engineers,
Part F: Journal of Rail and Rapid Transit, 219(3), 177–187.
https://doi.org/10.1243/095440905X8871
Oyarzabal, O., Gómez, J., Santamaría, J., & Vadillo, E. G. (2009). Dynamic optimization of track
components to minimize rail corrugation. Journal of Sound and Vibration, 319(3–5), 904–917.
https://doi.org/10.1016/j.jsv.2008.06.020
Ren, L., Xie, G., & Iwnicki, S. D. (2012). Properties of wheel/rail longitudinal creep force due to sinusoidal
short pitch corrugation on railway rails. Wear, 284–285, 73–81.
https://doi.org/10.1016/j.wear.2012.02.015
Sato, Y., Matsumoto, A., & Knothe, K. (2002a). Review on rail corrugation studies. In Wear (Vol. 253).
Sato, Y., Matsumoto, A., & Knothe, K. (2002b). Review on rail corrugation studies. In Wear (Vol. 253).
Steffen M. (2000). A linear wheel-rail model to investigate stability and corrugation on straight track. In
Wear (Vol. 243).
Suda, Y., Hanawa, M., Okumura, M., & Iwasa, T. (2002). Study on rail corrugation in sharp curves of
commuter line. In Wear (Vol. 253).
Suda, Y., Komine, H., Iwasa, T., & Terumichi, Y. (2002). Experimental study on mechanism of rail
corrugation using corrugation simulator. In Wear (Vol. 253).
Sun, Y. Q., & Simson, S. (2008). Wagon-track modelling and parametric study on rail corrugation
initiation due to wheel stick-slip process on curved track. Wear, 265(9–10), 1193–1201.
https://doi.org/10.1016/j.wear.2008.02.043
T~ssii, E. (1991a). A LINEAR MODEL FOR THE CORRUGATION OF RAILS. In Journal of Sound and Vibration
(Issue 1).
T~ssii, E. (1991b). A LINEAR MODEL FOR THE CORRUGATION OF RAILS. In Journal of Sound and Vibration
(Issue 1).
Tak´acs, N., Tak´acs, T., Harasztosi, L., & Beke, D. L. (n.d.-a). Correlation between Barkhausen-noise and
corrugation of railway rails.
Tak´acs, N., Tak´acs, T., Harasztosi, L., & Beke, D. L. (n.d.-b). Correlation between Barkhausen-noise and
corrugation of railway rails.
Tassilly, E., & Vincent, N. (1991a). Rail corrugations: analytical model and field tests. In Wear (Vol. 44).
Tassilly, E., & Vincent, N. (1991b). Rail corrugations: analytical model and field tests. In Wear (Vol. 44).
Torstensson, P. T., & Nielsen, J. C. O. (2009). Monitoring of rail corrugation growth due to irregular wear
on a railway metro curve. Wear, 267(1–4), 556–561. https://doi.org/10.1016/j.wear.2009.01.046
Torstensson, Peter T., & Schilke, M. (2013). Rail corrugation growth on small radius curves-
Measurements and validation of a numerical prediction model. Wear, 303(1–2), 381–396.
https://doi.org/10.1016/j.wear.2013.03.029
Wang, K. Y., Liu, P. F., Zhai, W. M., Huang, C., Chen, Z. G., & Gao, J. M. (2014). Wheel/rail dynamic
interaction due to excitation of rail corrugation in high-speed railway. Science China Technological
Sciences, 58(2), 226–235. https://doi.org/10.1007/s11431-014-5633-y
Wild, E., Wang, L., Hasse, B., Wroblewski, T., Goerigk, G., & Pyzalla, A. (2003). Microstructure alterations
at the surface of a heavily corrugated rail with strong ripple formation. Wear, 254(9), 876–883.
https://doi.org/10.1016/S0043-1648(03)00239-4
Wu, T. X., & Thompson, D. J. (2005a). An investigation into rail corrugation due to micro-slip under
multiple wheel/rail interactions. Wear, 258(7–8), 1115–1125.
https://doi.org/10.1016/j.wear.2004.03.060
Wu, T. X., & Thompson, D. J. (2005b). An investigation into rail corrugation due to micro-slip under
multiple wheel/rail interactions. Wear, 258(7–8), 1115–1125.
https://doi.org/10.1016/j.wear.2004.03.060
Xie, G., & Iwnicki, S. D. (2008). Calculation of wear on a corrugated rail using a three-dimensional
contact model. Wear, 265(9–10), 1238–1248. https://doi.org/10.1016/j.wear.2008.01.026
Zhao, X., Wen, Z. feng, Wang, H. yu, Jin, X. song, & Zhu, M. hao. (2014). Modeling of high-speed wheel-
rail rolling contact on a corrugated rail and corrugation development. Journal of Zhejiang
University: Science A, 15(12), 946–963. https://doi.org/10.1631/jzus.A1400191