Professional Documents
Culture Documents
For Tongue and Groove flanges: Select the nominal width of Garlock Style 3535 that is equal to or less than the width.
1.2 Installation
Clean the sealing surface, remove old Standard Flanges Standard Flanges
sealing remains, and check for damage. Flat Faced Raised Faced
Option 2
To minimize flange rotation.
Step 1 Tighten all nuts initially by hand. (Larger bolts may require a small hand wrench.) Always torque nuts in a cross
bolt tightening pattern.
Step 2 Torque each nut to approximately 30% of full torque, using the cross bolt
tightening pattern.
Step 3 Torque each nut to approximately 60% of full torque, using the cross bolt
tightening pattern.
Step 4 Torque each nut to full torque, again using the cross bolt tightening pattern
(Large-diameter flanges may require additional tightening passes.)
Step 5 Apply at least one final full torque to all nuts in a clockwise direction until torque
is uniform. (Large-diameter flanges may require additional tightening rounds.)
Note:
Properties/applications shown throughout this brochure are typical. Your specific application should not be undertaken without independent study and evaluation for suitability. For specific application recommendations consult Garlock. Failure to select the proper sealing products
could result in property damage and/or serious personal injury. Performance data published in this brochure has been developed from field testing, customer field reports and/or in-house testing. While the utmost care has been used in compiling this brochure, we assume no
responsibility for errors. Specifications subject to change without notice. This edition cancels all previous issues. Subject to change without notice GARLOCK is a registered trademark for packings, seals, gaskets, and other products of Garlock.
© Garlock Inc 2017. All rights reserved worldwide.
GARLOCK GMBH Garlock Sealing Technologies Garlock de Canada, LTD Garlock de Mexico, S.A. De C.V.
an EnPro Industries family of companies GPT Garlock China Garlock New Zealand
Falkenweg 1, 41468 Neuss, Germany Garlock PTY Garlock Singapore Garlock Great Britain Limited
Tel: +49 2131 349 0 Garlock do Brasil Garlock USA Garlock Middle East
www.garlock.com Garlock India Private Limited
NHK-1.6-JST-3535-26217.EN