Professional Documents
Culture Documents
www.veristar.com
Requirements:
Bureau Veritas Rules for the Classification of Steel Ships Part C Chapter 4
SOLAS 74, as amended, Regulations II-2/9.3.1
IMO Res MSC.307(88) (2010 FTP Code)
IMO Res. MSC.61(67)-(FTP Code) with IMO Res MSC.307(88) (2010 FTP Code) article 8
IMO MSC/Circ.1120
This certificate is issued to attest that Bureau Veritas Marine & Offshore did undertake the relevant approval procedures for the product identified
above which was found to comply with the relevant requirements mentioned above.
This certificate remains valid until the date stated above, unless cancelled or revoked, provided the conditions indicated in the subsequent page(s) are complied
with and the product remains satisfactory in service. This certificate will not be valid if the applicant makes any changes or modifications to the approved product,
which have not been notified to, and agreed in writing with Bureau Veritas Marine & Offshore. Should the specified regulations or standards be amended during
the validity of this certificate, the product(s) is/are to be re-approved prior to it/they being placed on board vessels to which the amended regulations or standards
apply. This certificate is issued within the scope of the General Conditions of Bureau Veritas Marine & Offshore available on the internet site www.veristar.com.
Any Person not a party to the contract pursuant to which this document is delivered may not assert a claim against Bureau Veritas Marine & Offshore for any
liability arising out of errors or omissions which may be contained in said document, or for errors of judgement, fault or negligence committed by personnel of the
Society or of its Agents in establishment or issuance of this document, and in connection with any activities for which it may provide.
3. TEST REPORTS:
Laboratory Test report Date Division Fire rating Test standard
SP, Sweden N° PX05454rev1 08/09/2011 Bulkhead A-60 IMO FTP Code Annex 1 Part 3 [test
DBI, Denmark N° PGA10025 22/12/2011 Deck A-60 standard: IMO Resolution A.754(18)]
SP, Sweden N° 4P06068 17/01/2015 Bulkhead A-60
SP, Sweden N° 4P07023 04/02/2015 Deck A-60
DBI, Denmark N° PGA10723A 04/02/2016 Deck A-0
DBI, Denmark N° PGA10724A 05/02/2016 Bulkhead A-0
DBI, Denmark N° PGA10800A 26/05/2016 Deck A-60 IMO 2010 FTP Code Annex 1 Part 3
DBI, Denmark N° PGA10871Arev1 09/12/2016 Deck A-60
SP, Sweden N° 7P02167 07/08/2017 Deck A-60
RISE, Sweden N° 8P07094rev 1 16/01/2020 Bulkhead A-0
CTO, Poland N° RS-18/B-485/E 10/12/2018 Bulkhead A-60
CTO, Poland N° RS-19/B-255/E 20/08/2019 Bulkhead A-60
4. APPLICATION / LIMITATION:
4.1 - Approved for use as cable transits in A-0, A-15, A-30 and A-60 class steel divisions, with limitations contained in §1.
4.2 - The fitting aboard to be the same as used for the test.
6. MARKING OF PRODUCT:
The product or packing is to be marked with manufacturer name, type, designation and fire-technical rating.
7. OTHERS:
7.1 - It is ROXTEC International AB's responsibility to inform shipbuilders or their sub-contractors of the proper methods of
fitting, use and general maintenance of the approved equipment and the conditions of this approval.
7.2 - This Certificate supersedes the Type Approval Certificate N° 13965/C2 BV issued on 28/08/2017 by the Society.
7.3 - Testing of the penetrations for gastightness and watertightness as per following inspection reports, witnessed by Third
Party surveyor:
- report N° MLM 020408 dated 30/06/2002, from DNV, Sweden.
- report N° MLM 30473-1 dated 27/01/2003, from DNV, Norway.
- report N° DNV40007647-1 dated 13/12/2011, from DNV, Norway.
- report N° N141EX8Z Rev.2 dated 10/08/2017, from DNVGL, Sweden.
Watertightness test Gastightness test
(before fire exposure) (before fire exposure)
Welded SL and SLF sleeves (size 50-200) 6 bar during 60 min 4 bar during 30 min
Bolted SLF sleeves (size 50-200) 5 bar during 60 min 2.5 bar during 30 min
Bolted SLA sleeves (size 50-100) 4 bar during 60 min 1.5 bar during 30 min