Professional Documents
Culture Documents
www.veristar.com
Requirements:
Bureau Veritas Rules for the Classification of Steel Ships,
IMO Res. A.1021(26), FSS Code Ch. 9,
OlNy
IEC 60092-504 (2001), IEC 60533 (2015), IEC 60945 (2002) +/Corr.1 (2008),
EN 54-2 (1997)+A1 (2006), EN 54-4 (1997)+ A2 (2006).
E Don
E Wn
E Nio20
Rat20
E Nrmc
BnEfoDe
A S i14
Hor
This certificate is issued to attest that BUREAU VERITAS did undertake the relevant approval procedures for the product identified above which
was found to comply with the relevant requirements mentioned above.
This certificate remains valid until the date stated above, unless cancelled or revoked, provided the conditions indicated in the subsequent page(s) are complied
with and the product remains satisfactory in service. This certificate will not be valid if the applicant makes any changes or modifications to the approved product,
which have not been notified to, and agreed in writing with BUREAU VERITAS. Should the specified regulations or standards be amended during the validity of
this certificate, the product(s) is/are to be re-approved prior to it/they being placed on board vessels to which the amended regulations or standards apply. This
certificate is issued within the scope of the General Conditions of BUREAU VERITAS Marine & Offshore Division available on the internet site www.veristar.com.
Any Person not a party to the contract pursuant to which this document is delivered may not assert a claim against BUREAU VERITAS for any liability arising out
of errors or omissions which may be contained in said document, or for errors of judgement, fault or negligence committed by personnel of the Society or of its
Agents in establishment or issuance of this document, and in connection with any activities for which it may provide.
- Product description:
Fire Detection System Salwico CCP consists of different modules and devices, listed here below, that can be connected
together.
1.1 - Hardware:
Unit Consilium Code Description
- Dimensions (h x w x d): 570x440x180 mm
Central Cabinet - Material: Metal Sheet 1.5mm
- Index of Protection: 31
SD Memory (optional)
Communication:
Control / Repeater 4.3
- USB
Cargo
- 2 x Host
RO/Pax
- 1 x Slave
OlNy
Work boat
5100195-XXX - Ethernet
Yacht
- RS485/232
Cruise
CFD500N (Navy)
CFD5000 (SIL)
E Don - RS422/485
I/O:
E Wn - 2 x 70 mA
- 2 x Relays
Control Panel M4.3
Cargo
E Nio20
RO/Pax
Work boat Rat20
Yacht
Cruise E Nrmc
5101003 Display 4,3" THT
CFD500N (Navy)
CFD5000 (SIL) BnEfoDe
A S i14 In:
- Input Voltage AC 85-264 V
PSU M AC/DC 5A
Hor 5100087-01A
- Input Voltage DC 90-350 V
- Frequency Range AC 45-65Hz
F Out:
- Output Voltage 28 VDC
- Working Current 5A
- Max Output Current 7.5A
In:
- 2 x 24 VDC
- Battery Temp. Sensor
Charger M H 5100062-01A
Out:
- 2 x 24 VDC Bus Feed
- 24 VDC (up to 8A) external
Operating voltage range: 85-264 VAC
Change Over M X H 5100066-01A
Max Output Current: 6A
5100054-01A /
Bus Con. M 10/20 H In/Out : Isolated RS485/232
5100056-01A
Control M X H 5100002-01A
E Don Communication:
- Ethernet
E Wn - RS422/485
- RS232
BnEfoDe
- 2 inputs and 3 outputs
CS-Loop M H 5210003-00A - Loop Controller Module
CS-Safety M H 5210001-00A - Safety Control Module
Surge Prot M H
Hor 5100421-00A
• Surge protected power inputs for the Backbone Bus
Internal, BBI.
• Terminal board for Backbone Bus External, BBE
F (RS485 Repeater).
• Electronic short circuit protected outputs for Control or
Repeater panels.
1.2 - Software:
Unit Consilium Code Software Versions
Control / Repeater 4.3 5100195-XXX 1.9.0
Control Panel M4.3 5101003-XXX 1.9.0
Control MX 5100002 1.9.0
1.3 - Battery:
Unit Code Description
Celltec Leader/Vision CTG2.3-12 Valve Regulated Lead-Acid Battery
Yuasa NP-2.3-12 Valve Regulated Lead-Acid Battery
E Don
5100333-00 Salwico Cruise installation Manual, dated May 2015
E Wn
5100334-00 Salwico Cruise Service&Maintenance Manual, dated May 2015
5100336-00A0l Salwico Cruise Quick Guide, dated April 2010
Nio20
5100380 Salwico General Alarm User Manual, dated October 2014.
E
For modification B1 version:
Celltech Vision: Rat20
E Nrmc
- Data sheet CP1223 12V 2.3Ah (20hr) Ref.: CP1223.pdf, dated 2014
- Data sheet CTG2.3-12 460-6060 Ref.:CTG2.3-12.pdf, dated 2015
BnEfoDe
Yuasa:
- Manual NP Valve Regulated Batte#y np_eng_man.pdf
- NP Baureihe-Series YUASA np:ger-eng_bro.pdf
S i14
- NP-Series Data Sheet NP23-12 np2-3-12_eng_tds.pdf
A
Phoenix Contact: Hor
- Safety Data Sheet MSDS No.3023 valveregulatedleadbatte#yg_eng_msds.pdf
3. TEST REPORTS:
3.1 - Type approval testing of automatic fire alarm panel type SFC including 2 types of power supplies (5A and 10A) according
to EN54 part 2 and 4 and EN50130-4 for industrial application - Ref: DANAK-1910655 dated 09/10/2009.
3.2 - Type approval testing of automatic fire alarm panel type SFC including 2 types of power supplies (5A and 10A) and the
secondary control panel according to IEC60092-504, Chap5, IEC60533, and IACS E10 for marine application - Ref:
DANAK-1910699 dated 15/11/2009.
3.3 - Test reports
- Test Report Delta VDR-S-VDR Type CCP No.: A530860 Rev.C, dated 24 Aug 2010
- Test Report Delta T202423 No.:DANAK 19/12588, dated 14 Nov 2012
- Test Record Consilium CCP Compatibility to A-842.60 (General Alarm System), dated 2011-12-14
E Don
- Environmental Test Report No. E15290.00, dated Dec 29, 2015
E Wn
- Test Report CFD 5000 according to EN 54-2 No. 275699-2, dated Dec 29, 2015
- Environmental Test Report CFD 5000 No. E15302.00, dated Jan 15, 2016
4. APPLICATION / LIMITATION:
E Nio20
Rat20
4.1 - BUREAU VERITAS Rules for the Classification of Steel Ships.
4.2 - Approval valid for ships intended to be granted with the following additional class notations: AUT-UMS, AUT-CCS,
AUT-PORT and AUT-IMS.
E Nrmc
4.3 - Approval valid for ships having to comply with SOLAS 74 Convention, as amended, and for units having to comply with
BnEfoDe
IMO Resolution A649 (The "MODU Code").
4.4 - The equipment fulfils the EMC requirements for installation on the Bridge and Deck Zone.
4.5 - The minimum safe distance at which the equipment may be mounted from a standard or a steering magnetic compass is not
to be less than 5 m.
A S i14
Hor
4.6 - The equipment is not to be fitted in hazardous areas.
4.7 - Only type approved detectors shown to be compatible with the units should be used with them.
4.8 - Power supply sources wiring: the main (respective emergency) feeder shall run from the main (respective emergency)
F
switchboard to the changeover switch without passing through any other distributing switchboard.
4.9 - The complete installation design showing the location of the unit, the type and location of the detectors, alarm sounders
and manual call points should be submitted to the Society's Surveyors for approval.
4.10 - Satisfactory performance tests should be witnessed on each installation by the Society's Surveyor after installation on
board.
4.11 - An instruction manual covering operation, maintenance and testing should be placed on board each ship fitted with this
equipment.
4.12 - Only Hardware and Software successfully tested together in compliance with the regulations as referred to in page one,
according to the declaration of the manufacturer are covered by this certificate.
4.13 - System is also approved as General Alarm system.
4.14 - DC/DC converter QUINT-PS/24DC/DC/5-2320034 installed with Fire Detection System Salwico CCP has to be covered
by a valid type approval certificate, issued by the Society's.
6. MARKING OF PRODUCT:
6.1 - Maker's name or trade mark
- Serial number of the unit
- Equipment type number or model identification under which it was type-tested
- Date of approval.
- According to EN 54-2/4
6.2 - Alternatively, the marking may be presented on a display at equipment start- up.
6.3 - The title and version of each software element included in the installed software system shall be either marked or displayed
on command on the equipment.
6.4 - When the marking and the title and version of the software are displayed only on the display, such information shall also
be included in the equipment manual.
7. OTHERS:
7.1 - It is Consilium Marine & Safety AB - SWEDEN's responsibility to inform shipbuilders or their sub-contractors of the
OlNy
proper methods of fitting, use and general maintenance of the approved equipment and the conditions of this approval.
7.2 - This certificate supersedes the Type Approval Certificate No. 22839/B0 BV issued on 18 Nov 2015 by the Society.
E Don
E Wn *** END OF CERTIFICATE ***
E Nio20
Rat20
E Nrmc
BnEfoDe
A S i14
Hor
F