Professional Documents
Culture Documents
Circuit Description
Dual outputs based on sensed parameters provide up to two independent switched outputs
for OEM use. The state of each switched output can be determined by different inputs to
the electronic control module (ECM) depending on the engine platform. The ECM can
provide different outputs to OEM devices if any of the inputs are above or below calibrated
thresholds. Each switched output is independent of the other with respect to control
parameter input and threshold settings.
Component Location
The dual outputs features are OEM dependent. Refer to OEM troubleshooting information
for component location.
Shop Talk
This fault code is activated when one of the OEM defined inputs has exceeded a
calibratible limit. The triggers for shutdown are OEM dependent.
Troubleshooting Steps
STEPS SPECIFICATIONS
13:13:13 2007-07-20
Auxiliary Commanded Dual Output Shutdown - Special Instructions Page 2 of 2
Conditions
Action
Active or inactive counts of Fault Code Active or inactive counts of Fault Code
599? 599?
YES NO
The engine protection limit has been No Repair
exceeded or the OEM supplied auxiliary
device. Refer to the OEM troubleshooting
manual.
Copyright© 2004
Cummins, Inc.
All rights reserved
13:13:13 2007-07-20