Professional Documents
Culture Documents
[Abdelrahman Ababneh]
Author Note
…………………………………………………………..
Availability and Costs
A. Walls
Polystyrene Foam
The polystyrene composition is 98% air and 2% styrene granular, filled with gas. In the
manufacturing process, the material is dissolved in a polymer mass, and then heated with steam.
Due to this, polystyrene balls are born, which can increase in size up to 50 times.
o Length: 1.2 m
o Width: 0.6 m
o Cost: 1.5 – 2 JD
B. Roofs
Latex acrylic
Acrylic elastomer is a highly flexible waterproofing material. Its primary component is acrylic
C. Window
Double windows will be used to reduce thermal loss and also reduce acoustic noise, the
gap between the inner and outer glass ranges from (16-40) mm , The greater the gap between the
glass, the greater the thermal and acoustic insulation , The gap between the inner and outer glass
is emptied of air or a poor conductive gas A layer of super nano ceramic can be placed through
which to allow the passage of light, reduce the temperature inside and give you more comfort
and coolness as the thermal insulation works on isolation of infrared rays IR by up to 98% and
transparency of up to 70%.
D. Building foundations and Floor.
Bitumen or what is known as “asphalt” in Jordan, they are polycyclic aromatic hydrocarbons.
The asphalt is completely dissolved into CS2 carbon disulfide. are widely used to isolate
building foundations (bases) from moisture coming from the ground from the ground water.