Professional Documents
Culture Documents
CuZn38Pb1.5 Revision 13 03 EU
Composition Cu Pb Zn
[%] [%] [%]
59,5 –
1,0 – 2,0 rem.
61,5
This leaflet is for general information only and is not subject to revision. No claims can be derived from it unless there is evidence of intent or gross
negligence. The data given are no warranty that the product is of a specified quality and they cannot replace expert advice or the customer’s own test.
www.aurubis.com
TECHNICAL DATASHEET
CuZn38Pb1.5
Fabrication
Machinability* 90%
properties
Cold formability fair
Hot formability very good
Resistance welding not recommended
Oxyacetylene welding not recommended
Inert gas shield arc welding not recommended
Brazing fair
Soldering very good
*The evaluation of machinability is not an absolute measured value. It rather is a comparative rating
(CuZn39Pb3=100%). Ratings from other sources might be different.
Corrosion CuZn38Pb1.5 has a good resistance to fresh water, neutral or alkaline salt solutions,
resistance organic compounds, land, sea and industrial atmosphere.
Not resistant to acid, damp sulfur compounder, damp ammonia, especially sensitive to
stress corrosion cracking and dezincification in a not stress relieved condition.
Typical uses Form by turning, electrical components, screws, clamps, connector pins
Form of Steel drums Pack coiling Coils Tubular carriers Bulk coils*
delivery max. 1.200 kg 300 – 1200 kg 30 – 150 kg 400 – 1.000 kg max. 4000 kg
*The delivery of bulk coils is only possible on request for soft, round wires. However, this has to be checked in
detail.
This leaflet is for general information only and is not subject to revision. No claims can be derived from it unless there is evidence of intent or gross
negligence. The data given are no warranty that the product is of a specified quality and they cannot replace expert advice or the customer’s own test.
www.aurubis.com