The document outlines chemical spill procedures for Euro-Med Laboratories Phil., Inc. It instructs workers to quickly determine the extent of any spill, contain it to prevent spreading, and reduce vapor concentrations. Workers should then prepare for clean-up by wearing appropriate protective equipment and carefully removing spilled material, cleaning affected areas, and properly disposing of contaminated materials. Finally, the spill area should be ventilated before continued use.
The document outlines chemical spill procedures for Euro-Med Laboratories Phil., Inc. It instructs workers to quickly determine the extent of any spill, contain it to prevent spreading, and reduce vapor concentrations. Workers should then prepare for clean-up by wearing appropriate protective equipment and carefully removing spilled material, cleaning affected areas, and properly disposing of contaminated materials. Finally, the spill area should be ventilated before continued use.
The document outlines chemical spill procedures for Euro-Med Laboratories Phil., Inc. It instructs workers to quickly determine the extent of any spill, contain it to prevent spreading, and reduce vapor concentrations. Workers should then prepare for clean-up by wearing appropriate protective equipment and carefully removing spilled material, cleaning affected areas, and properly disposing of contaminated materials. Finally, the spill area should be ventilated before continued use.
2. Contain the spill by placing a barrier around the spill using rags or sand from chemical spill kit to prevent from spreading of falling into cracks, drains, if this can be done without risk of injury or contamination. 3. Reduce vapor concentrations in the spill area. If possible, open doors that lead to outside areas that are free of people. 4. Prepare for clean-up and wear appropriate Personal Protective Equipment (PPE) such as gloves, goggles and aprons to prevent exposure and minimize contamination. 5. Remove sharp objects using tongs and never with hands. 6. Clean up spill by working from the outside spill toward the center to minimize spread of contamination. Clean up absorbed spill using broom and pan and properly dispose into a resealable bag for removal with tag out. 7. Clean-up cracks and hard surfaces. 8. Label and seal all contaminated material. 9. Wash hands and all exposed skin with soap and water. 10. Ventilate the spill area.