Professional Documents
Culture Documents
Technical Data Sheet PDF
Technical Data Sheet PDF
Surfaces:
I. Product:
Description:
One-component universal
Good adhesion to enamel, glass,
100% silicone sealant
ceramics, wood, metal,
the highest quality
hard PVC and others
designed to seal and
materials. Resistant to
filling seams and joints.
atmospheric and chemical
Suitable for most
influences.
construction work both inside and
and outside the room, where
there are increased requirements for
Not recommended
quality of work. use
Not exhibits adhesion to
polyethylene, polypropylene,
Application area: PTFE (Teflon®). When
unknown materials for
• Construction and avoid risk,
/
technological seams tests are recommended
• Applications in sanitary for adhesion.
technical equipment
• Connecting and
expansion joints
• Sealing connections and
cracks in bathrooms,
saunas, toilets or for others
construction seals, there,
where resistance is required against
Packaging:
mold
• Sealing of windows and doors Cartridge 280 ml
• Glass works 85 ml tube
II. Specifications:
Curing system: Acetate
Density: approx. 1.02 g / cm3
Application temperature: + 5ºC… + 40ºC
Smell: A slight specific odor during the curing process, which disappears after curing.
Skinning time: 15 minutes (approx.23 ° C / 50% humidity)
Cure rate: 3 mm / 1 day (about 23 ° C / 50% humidity)
Operating temperature: - 40 ° C to + 150 ° C
Hardness (Shore A): 25
Elastic modulus at 100% elongation: 0.62 MPa
Tensile strength: 2.03 MPa
Elongation at break: 5.3
UV resistance : very good
Page 2
Consumption of sealant (ml) in a 280 ml cartridge depending on the dimensions of the joint, mm
/
Depth Width
4 6 eight 12 20
__________________________________________________________________________________
_______________________________________________________________________________________________
Application restrictions
On corroded metal surfaces.
On concrete, plastered and cement surfaces.
For sealing aquariums.
On natural stones.
Security measures:
Acetic acid vapors released during the cure of the sealant may, if inhaled,
irritate the respiratory tract. Therefore, work should be carried out in a well-ventilated
indoors or use a protective mask. If uncured sealant gets in your eyes
or on the mucous membrane, immediately rinse the affected area thoroughly with water. Completely
the hardened sealant is harmless to health.
Page 3
Additional product details are in the Material Safety Data Sheet.
This datasheet is based on information obtained from testing and extensive experience in
areas of adhesives. Since it is impossible to explore all the ways of application and since there are many
different conditions of use, we cannot claim that the information is complete. We recommend spending
product testing prior to use to ensure success.
We guarantee consistent product quality.
/
Distributor and authorized organization in the Russian Federation:
Henkel Rus LLC
107045, Russia, Moscow
Kolokolnikov lane, 11
/
+7 495 745 22 34
www.moment.ru