Professional Documents
Culture Documents
For over 40 years Cat Pumps has been providing the longest lasting pumps available. The durability of the 1XP Series pumps
make it a great fit for the portable extractors that you depend on. Head-to-head testing against competition shows once again;
that when it comes to long life and durability nothing beats Cat Pumps.
Features
Compact direct drive for a small footprint ✔ ✔
FPM Seals for compatibility with cleaning soaps and chemicals ✔ ✔
Supported plunger rods remove side load on high pressure seals ✔ ✔
Crankcase supported crankshaft for consistent cam and plunger rod alignment ✔
Keyed shaft allows for clockwise or counter clockwise pump rotation ✔
Solid ceramic plungers that do not score or scratch like SS plungers ✔
Greaseless/oil less drive for less mess and less maintenance ✔
The backside of the high pressure seals lubricated by the liquid flowing through the pump,
extending plunger and seal life ✔
High pressure seal leakage is contained within the pump ✔
Reliability
Hours to first rebuild 1500 500
Hours to plunger replacement 3000 500
1.7
1.5
1.3
GPM
1.1
0.9
0.7
0.5
Run Hours 0 200 400 600 800 1000 1200 1400 1600
Better Features for Longer Pump Life
1XP Pump
High Pressure Seal 100% Lubricated One piece Manifold
Water flowing through the pump lubricates the The simple design allows the
backside of the high pressure seal so the plunger discharge manifold to
and seal surface does not run dry. be completely sealed with
one o-ring.
Competitor
Leakage High Pressure Seal only partially lubricated Two Piece Manifold
Water that gets by the The back side of the high pressure seal is open to requires six o-rings. With six
high pressures seal ends atmosphere, so the backside of the seal will be dry seal points on each manifold
up in the crankcase, which on the forward stroke of the plunger. The dry seal gives the pump 12 potential
mixes with the grease scores the plunger and shortens seal life. leak points between
required on the cam. That both sides.
greasy water solution ends
up leaking out unto the
bottom of the extractor
and possibly on the floor
being cleaned. Stainless Steel Plungers
The stainless steel is very
susceptible to scoring. In lab
testing the scoring occurs as
early as 100 hours.
Cam Wear
Cat Pumps cam and plunger rods show
virtually no wear after 1500 hours.
Competitor cam and plunger show
significant wear after 225 hours resulting
in a 22% decrease in plunger stroke.
Plunger Scoring
Cat Pumps solid ceramic plunger has no
scoring after 3000 hours and could still
be used with a new seal.
Competitor stainless steel plunger
severely scored after 225 hours and
would require replacement.
Supported Crankshaft
Cat Pumps crankcase supports the motor
shaft with a water lubricated bearing.
Competitor pump has no support for the
motor shaft which allows the motor shaft
to flex with side load.
“ The quality is there and Cat Pumps is there to back it up every inch
of the way. ”
Pat Carroll, Owner
Ultra Steam Carpet and Upholstery Cleaning
Minneapolis, MN
CAT PUMPS
1681 - 94TH LANE N.E. MINNEAPOLIS, MN 55449-4324
PHONE (763) 780-5440 — FAX (763) 780-2958
e-mail: techsupport@catpumps.com
www.catpumps.com
For International Inquiries go to www.catpumps.com and navigate to the “Contact Us” link. PN 993337 Rev A 4/13