Professional Documents
Culture Documents
Model DHH805 Handheld Communicator: HART Fieldbus Tools Handheld Configuration Devices
Model DHH805 Handheld Communicator: HART Fieldbus Tools Handheld Configuration Devices
Model DHH805
Handheld communicator
Design features
The Mobility DHH805 supports all HART devices at the Uni-
versal and Common Practice command levels plus all the
ABB and non-ABB devices at the Device Specific command.
Every Mobility DHH805 comes with a lifetime subscription
allowing users to keep up-to date with the latest device revi-
sions/definitions for an extended time.
Devices Updates (updated EDDs) can be directly downloaded
from the HART foundation website,
The Mobility DHH805 supports many transmitter types includ-
ing Analytical, Flow, Level, Pressure, and Temperature.
Below are some of the typical ways that the Mobility DHH805
can be used.
Devices commissioning
— Step-by-step configuration
— Document as-left configuration
— Electronic Birth Certificate
Operations
— Reconfiguration for process changes
— Reconfiguration for batch runs
— Document as-found and as-left configurations
Device Maintenance
— Troubleshoot devices with HART
— View device error messages
— Clone devices to commission replacements
— Preventive review of device status
Dimensions in mm (in.)
66 (2.59)
41 (1.61)
216 (8.52)
119 (4.69)
94 (3.70)
Electrical connections
1 2 3
1 Banana plugs for transmitter connection | 2 USB 2.0 port | 3 Battery charger connection
HART handheld communicator may be connected at any wiring termination point in the loop, providing the minimum
resistance is 250 ohm. If this is less than 250 ohm, additional resistance should be added to allow communications.
- 5
2
M+
6 7 8
5 9
4
3
1 2
2 40 60 10
0 80
20 10
% 0
0
Kent-Taylor
-
+
- 7
+ +
+
6
4
-
691HT
- 1 F1 F2 F3 F4
PV
TRI M
A B C D E F G H I
1 2 3
J K L M N O P Q R
4 5 6
S T U
@ %
7
V W X
8
& /
Y Z #
9
+
3
0 -
1 Power source | 2 Remote indicator | 3 Handheld communicator | 4 External ground termination point | 5 Internal ground termination point |
6 Line load | 7 Harting Han 8D socket insert for mating plug (supplied loose)
5 4
5
6
ABB S.p.A.
Industrial Automation
Via Luigi Vaccani 4
22016 Tremezzina (CO)
Italy
Tel: +39 0344 58111
www.abb.com