Professional Documents
Culture Documents
Reconditioning kit
Breaker box
© 2010 Atlas Copco Construction Tools GmbH | No. 3390 7494 01 | 2010-07-05
Reconditioning kit HB 2000 DP
3
2
1 Fig. 1
5
Note: Before welding the wear protection you must dismantle the perussion unit.
You must use a qualified professional welding company to weld the wear protection onto the breaker
box.
© 2010 Atlas Copco Construction Tools GmbH | No. 3390 7494 01 | 2010-07-05
HB 2000 DP Reconditioning kit
A
B
K
C
D
F
G
J I H
E
Fig. 3
© 2010 Atlas Copco Construction Tools GmbH | No. 3390 7494 01 | 2010-07-05
Reconditioning kit HB 2000 DP
Screw two load rings (Fig. 4/A) M 24x30 Remove plastic parts and plugs from the breaker
(Part-Id.-No. 3363 1067 23) into the two box.
threaded bores on the upper face of the cylinder
cover as far as they will go.
Using a hoist/crane, lift the percussion unit of
the hydraulic breaker out of the breaker box.
Fig. 4
© 2010 Atlas Copco Construction Tools GmbH | No. 3390 7494 01 | 2010-07-05
HB 2000 DP Reconditioning kit
B-B
a4
2
a8
a6
(45)
a8
4
(185)
(140)
B
10
a6
1 392
441
3
weldment construction
a8 5 general tolerances EN 13920
lengths ; angle ..... B .....
from ; position ..... E .....
a8 manufacturing quality DIN EN ISO 5817
quality class ..... C .....
182
A A
a4 pre-heat: temperature 150°C - 200°C
optional welding processes
- DIN EN ISO 4063 - arc-welding
- DIN EN ISO 14610 - gas-shielded-welding
5
3
Fig. 6
© 2010 Atlas Copco Construction Tools GmbH | No. 3390 7494 01 | 2010-07-05
Reconditioning kit HB 2000 DP
© 2010 Atlas Copco Construction Tools GmbH | No. 3390 7494 01 | 2010-07-05
HB 2000 DP Reconditioning kit
© 2010 Atlas Copco Construction Tools GmbH | No. 3390 7494 01 | 2010-07-05
© 2010 Atlas Copco Construction Tools GmbH, Essen, Germany | No. 3390 7494 01 | 2010-07-05
Any unauthorized use or copying of the contents or any part thereof is prohibited.
This applies in particular to trademarks, model denominations, part numbers and
drawings.
www.atlascopco.com