Professional Documents
Culture Documents
78DXXL: Unisonic Technologies Co., LTD
78DXXL: Unisonic Technologies Co., LTD
, LTD
78DXXL LINEAR INTEGRATED CIRCUIT
DESCRIPTION
The UTC 78DXXL family is monolithic fixed voltage regulator
integrated circuit. They are suitable for applications that required
supply current up to 0.5 A.
FEATURE
* Output Current Up To 0.5 A
* Fixed Output Voltage Of 5V, 6V, 8V, 9V, 12V, 15V and 18V
Available
* Thermal Overload Shutdown Protection
* Short Circuit Current Limiting
* Output Transistor SOA Protection
ORDERING INFORMATION
Ordering Number Pin Assignment
Package Packing
Lead Free Halogen Free 1 2 3
78DXXLL-AA3-R 78DXXLG-AA3-R SOT-223 I G O Tape Reel
78DXXLL-AB3-B-R 78DXXLG-AB3-B-R SOT-89 O G I Tape Reel
78DXXLL-TM3-T 78DXXLG-TM3-T TO-251 I G O Tube
78DXXLL-TN3-R 78DXXLG-TN3-R TO-252 I G O Tape Reel
78DXXLL-TNA-R 78DXXLG-TNA-R TO-252-3 I G O Tape Reel
Note: 1. XX: Output Voltage, refer to Marking Information
2. Pin Code: I: Input G: GND O: Output
www.unisonic.com.tw 1 of 8
Copyright © 2018 Unisonic Technologies Co., Ltd QW-R101-036.I
78DXXL LINEAR INTEGRATED CIRCUIT
MARKING INFORMATION
PACKAGE VOLTAGE CODE MARKING
SOT-223
05: 5V
06: 6V
08: 8V
SOT-89
09: 9V
12: 12V
15: 15V
18: 18V
TO-251
TO-252
TO-252-3
BLOCK DIAGRAM
1 INPUT
Z2
R13 R17 R9 T12
T14
T10 T8 T9
R19
R18
R12
R14 T13
T11
T5 R11 R10
3 OUTPUT
T6
R8
R15 R5
T4
Z1
T15
R4
R6
T7
R7
R1 R2 C1
R16
T3
T1 T2
R3
2 GND
Note: Bypass capacitors are recommended for optimum stability and transient response and should be located as
close as possible to the regulators.
THERMAL DATA
PARAMETER SYMBOL RATINGS UNIT
SOT-223 15
Junction to Case SOT-89 θJC 55 °C/W
TO-251/TO-252 12.5
ELECTRICAL CHARACTERISTICS
(TJ=25°C, CI =0.33μF, CO=0.1μF, PD≤7W, unless otherwise specified)
For 78D05L (VIN=10V, IOUT=0.5A)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
IOUT=5mA~0.5A 4.8 5 5.2 V
Output Voltage VOUT
VIN =7.5~20V, IOUT=5mA~0.5A 4.75 5.25 V
IOUT=5mA~0.5A 100 mV
Load Regulation ∆VOUT
IOUT=5mA~200mA 50 mV
VIN =7V~25V 100 mV
Line Regulation ∆VOUT
VIN =7.5~20V, IOUT=0.5A 100 mV
Quiescent Current IQ IOUT=0.5A 8 mA
VUT =7.5~20V 1 mA
Quiescent Current Change ∆IQ
IOUT=5mA~0.5A 0.5 mA
Output Noise Voltage eN 10Hz≤f≤100kHz 40 μV
Ripple Rejection RR VIN =8~18V,f=120Hz 59 80 dB
Peak Output Current IPEAK 1.2 A
Short-Circuit Current ISC VIN=VOUT+19V 250 mA
Dropout Voltage VD 2 V
TYPICAL CHARACTERISTICS
Bias Current vs. Junction Temperature Output Voltage vs. Junction Temperature
6 5.5
5.4 VIN=10V
5 IOUT=5.0mA
Output Voltage, VOUT (V)
5.3
Bias Current, IB (mA)
5.2
4
VIN=10V 5.1
IOUT=0A
3 5.0
4.9
2
4.8
4.7
1
4.6
0 4.5
-25 -5 15 35 55 75 95 115 135 155 -25 -5 15 35 55 75 95 115 135 155
Junction Temperature, TJ (°C) Junction Temperature, TJ (°C)
Dropout Voltage vs. Junction Temperature Short Current vs. Input Voltage
2 1.6
1.8 1.4
IOUT=0.5A
1.6
1.2
1.4
IOUT=0.1A
1.2 1
1 IOUT=0A 0.8
0.8 0.6
0.6
0.4
0.4
0.2 0.2
0 0
-40 -20 0 20 40 60 80 100 120 140 0 3 6 9 12 15 18 21 24 27 30 33 36 40
Junction Temperature, TJ (°C) Input Voltage, VIN (V)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all UTC products described or contained herein.
UTC products are not designed for use in life support appliances, devices or systems where malfunction
of these products can be reasonably expected to result in personal injury. Reproduction in whole or in
part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to
make changes to information published in this document, including without limitation specifications and
product descriptions, at any time and without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.