Professional Documents
Culture Documents
User Manual of Slicing Software (I) PDF
User Manual of Slicing Software (I) PDF
Version 1.2
1
2
2. Slice model
Double-click to open the software . come into the software slice interface!
Save models
to STL file
Delete model
3
(2) Adjust the model.
There are 4 function button can adjust before sliing.
● Click Floor icon , then click the wanted side of model to be the base.
4
●Click rotate icon, rotate icon to rotate the
model.
Tick Uniform scale, scale up or down at any one of XYZ, model will
Change along all XYZ direction. If not tick, the model will only
Change along only one axis revised.
5
Click reset button, model will be back to the original size.
Click Max button, model will become to the biggest printing size. .
●Precaution: If model turn to red means beyond the printing area(like the below image) when operate the
above steps, needs to adjust till red disappear.
6
(3) slice function
●Click the slice button, there will be two options: onekey printing(for beginners) and custom printing(for experts)
●click onekey printing (parameter is stable, not adjustable) . there are three modes: fast printing, standard
printing and optimize printing. Please choose the mode according to demand.
7
To give up slicing
When slide this bar, can see each layer and its structure.
●click the Custom button, there will be custom toolbars, which the parameters is adjustable, the user can
according to their own like and the the shape of the printing model to setting the relevant parameters
8
Thank you for choosing EasyThreed 3D Printer!