Professional Documents
Culture Documents
www.oilandgasengineering.asia
CLIENT SPECIFICATION, SCHEDULE AND REPEAT BUSINESS THROUGH OUR
ATTENTION TO DETAIL IS OUR GOAL
When the electric power is supplied from the high frequency generator to a heating coil
surrounding the pipe, a narrow circumferential band around the pipe is heated inductively.
As the appropriate bending temperature is reached, the pipe is mechanically driven through the
heating coil and immediately cooled by water or air depending on the kind of materials, while
the pipe bending is taking place moving through the heated zone.
The pipe end is clamped at a predetermined distance from the arm post center, which is equal to
the radius of curvature,the bending takes place at the tangent point encircled by the heat ring,
thus the pipe is bent continuously at a predetermined point with the specified bending radius and
angle settings.
Inductive Current
Technical Information for Induction Bending
D T
E=Ellipticity Tr=Thining
R=Radius T =Thickness of original pipe
D=Out Diameter (OD T1=Thickness after bending
DL=Maximum Diameter C1=Compression side thickness
DS=Minimum Diameter
www.oilandgasengineering.asia