Professional Documents
Culture Documents
cÖwZ‡e`b
Dc‡iv³ Kv‡Ri m¤¢ve¨ e¨q wbiæc‡Yi j‡ÿ¨ cÖv°jbLvbv cÖ¯‘Z Kiv n‡q‡Q| MZ 21/05/19 wLªt
Zvwi‡L †Pqvig¨vb, evsjv‡`k ZuvZ †evW©, BMTF, Pxd cø¨vwbs m‡iRwg‡b cwi`k©b K‡ib|
cwi`k©bKv‡j BMTF Gi cÖwZwbwa B‡Zvc~‡e© ¯’vwcZ ÷xgjvBb 2ÕÕ Gi cwie‡Z© 3ÕÕ Kivi
wm×všÍ cÖ`vb K‡ib| †mBmv‡_ ÷xg jvBb, cvwbi jvBb ¯’vwcZ †gwk‡bi mv‡_ ms‡hv‡Mi Rb¨
ms‡hvM jvBb wbg©v‡Y©i wel‡q wm×všÍ cÖ`vb K‡ib| GQvovI cyivZb d¨v±ix fe‡bi ¯’vwcZ h‡š¿I
D‡jøwLZ jvBb cÖ`vb Ki‡Z n‡e g‡g© wm×všÍ cÖ`vb K‡ib| Ab¨_vq †gwkbmg~n Pvjy Kiv m¤¢eci
n‡e bv| wmwjs gvD‡›UW GMR÷ d¨v‡bi ms‡hvM jvBb, †mvjvi c¨v‡bj Ges cjøx we`y‡ri
Pvwn`vgvwdK wKQz hš¿ mieiv‡ni wm×všÍ cÖ`vb Kiv nq| ‡Rbv‡iUi iæ‡g ‡Rbv‡iUi ¯’vc‡bi Rb¨
Avjv`vfv‡e dvD‡Ûkb Ges Kzwjs Gi Rb¨ Avjv`v AvÛvi MÖvDÛ IqvUvi wiRvf©vi ˆZwii wel‡q
wm×všÍ cÖ`vb Kiv n‡q‡Q| D³ AvÛviMÖvDÛ wiRvifviwU mve‡÷kb iæg Ges †Rbv‡iUi iæ‡gi ga¨¯’
duvKv RvqMvq wbg©vY Kiv n‡e| GQvovI we`¨gvb bZzb fe‡bi wfZ‡ii w`‡K `yBwU Iqvj, `iRv
bZzbfv‡e wbg©v‡Yi wel‡q wm×všÍ M„nxZ nq| ‡mBj‡ÿ¨ D³ cÖv°jb Lvbv cÖ¯‘Z Kiv nBqv‡Q|
cÖv°j‡b AšÍf©~³ AvB‡Ug mg~‡ni `i cÖavb cÖ‡KŠkjxi 2018 Bs mv‡ji `i Zdkxj Abyhvqx
aiv n‡q‡Q| ÷xg I cvwbi jvBb Ges †Rbv‡iU‡ii dvD‡Ûkb ˆZwi I ‡mvjvi c¨v‡bj ¯’vcbmn Avbylvw½K
Kv‡Ri cÖv°wjZ e¨q `vwo‡q‡Q UvKv 45,05,568/07 (cqZvwjøk j¶ cuvP nvRvi cuvPkZ AvUlwÆ
UvKv k~b¨ mvZ cqmv) gvÎ| hv cÖv°j‡b we¯ÍvwiZ D‡jøL Av‡Q|
cÖv°jb Lvbv m`q KvwiMwi Aby‡gv`b cÖ`v‡bi Rb¨ †ck Kiv nj|
Main building repair works (GF & FF) in/c Civil, internal sanitary and internal
electrification.
Civil Work.
Item No.1(CE’S-18.2.3)
Supplying, fitting and fixing of 9 mm thick perforated gypsum board false ceiling
with aluminium T bar frame in natural anodized frame at 600 mm x 600 mm grid
suspended from ceiling by 12 SWG double ply G.I. Wire
.
Toilet VIP 1/2 = 2x7’-0”x9’-3”= 129.50 Sft.
Room- 1, 2, 3, 4, 5&6 = 6x6’-0”x8’-0” = 288.00 “
= 417.50 Sft. = 38.78 Sqm.
Item No.2(CE’S-13.5.2)
Supplying, fitting and fixing window grill made of 10 mm x 10 mm M.S. solid bar
140mm c/c with outer frame of 38 mm x 6mm F.I. bar as per design approved and
accepted by the Engineer-in-charge.
G.F.
Window = 2x5’-0”x7’-9” = 77.50 Sft.
8x3’-9”x5’-0” = 150.00 “
H/Window = 2x2’-6”x11’-8” = 58.35 “
Stair Fan light = 2x1’-8”x9’-0” = 30.06 “
= 315.91 Sft.
F.F
Window = 12x3’-9”x5’-0” = 225.00 Sft.
= 4x5’-0”x7’-9” = 155.00 “
Stair Fan light = 2x1’-8”x9’-0” = 30.06 “
= 410.06 Sft.
= 725.97 Sft. = 67.44 Sqm.
Item No.3(CES-32.1)
Stripping of unserviceable plaster including racking out joints, cleaning etc
Ground Floor : 12 mm Plaster.
Conference Room = 2x52’-0”x10’-0” = 1040.00 Sft.
2x22’-11”x10’-0” = 458.40 “
= 1498.40 Sft.
Dinning room = 2x37’-6”x10’-0” = 750.00 Sft.
= 1x22’-11”x10’-0” = 229.20 “
= 2477.60 Sft.
Page-4
Deduction.
T/Door:= 1x2’-6”x7’-0” = 17.50 Sft.
R/Door = 7x3’-4”x7’-0” = 163.17 “
Window = 9x5’-0”x5’-0” = 225.00 “
6x3’-9”x5’-0” = 112.50 “
(-) = 518.17 Sft.
= 1959.43 Sft. Mark “A”
First Floor :
Dinning : 6x5’-0”x2’-6” = 75.00 Sft.
VIP : 2,2 : 12x5’-0”x3’-0” = 180.00 “
Room : 20x5’-0”x2’-6” = 250.00 “
Verarndah : 15x4’-0”x2’-6” = 150.00 “
= 655.00 Sft. Mark “F”
@Tk.25/-P/Sqm. Tk.12413/-
Item No.4(CE’s-15.4)
Minimum 12 mm thick cement sand (F.M. 1.2) plaster (1:6) having with fresh cement
to wall both inner-and outer surface, finishing the corner and edges including washing
of sand cleaning the surface, scaffolding and curing at least for 7 days, cost of water,
electricity and other charges etc. all complete in all respect as per drawing and accepted
by the Engineer.(Cement: CEM-II/A-M)
a) Ground floor.
Item No.5(CE’s-15.5)
Minimum 6 mm thick cement sand (F.M. 1.2) plaster (1:4) with fresh cement to
ceiling R.C.C. columns, beams, surface of stair case, sunshades, cornices, railings, drop
wall, louvers, fins and finishing the corners and edges including washing of sand
cleaning the surface, scaffolding and curing at least for 7 days, cost of water, electricity
and other charges etc. all complete in all respect as per drawing and accepted by the
Engineer. (Cement: CEM-II/A-M). Ground floor.
a) Ground floor.
Qnty same as Item No – 10 Mark “E”= 1487.34 Sft. = 138.17 Sqm.
Item No.6(CES-32.2.2)
Picking-up of unserviceable tiles including bonding mortar from floor, walls and dado
etc. and removal of debris to a safe distance.
Dinning = 1x37’-6”x22’-11” = 859.95 Sft.
Skirting = 2x(37’-6”+22’-11”)x0’-6” = 60.42 “
East Verandah = 1x60’-0”x8’-0” = 480.00 “
West “ = 1x62’-6”x8’-0” = 500.00 “
Stair front Passage = 1x25’-0”x15’-0” = 375.00 “
Stair loby = 1x12’-6”x22’-11” = 286.50 “
= 2x(12’-6”+22’-11”)x0’-6” = 35.42 “
Column = 12x5’-4”x0’-6” = 31.98 “
= 2629.27 Sft.
Deduction :
Door = 4x3’-4”x0’-6” (-) = 6.66 Sft.
= 2622.61 Sft. Mark “A”
G.F Column :
4x5’-4”x10’-0” = 213.20 Sft. Mark “B”
G.F
Stair : Trade = 2x11x7’-0”x1’-0” = 154.00 Sft.
= 2x10x7’-0”x0’-6” = 70.00 “
Landing = 1x14’-0”x5’-0” = 70.00 “
Skirting = 2x2x12’-0”x0’-6” = 24.00 “
= 2x5’-0”x0’-6” = 5.00 “
= 1x14’-0”x0’-6” = 7.00 “
= 330.00 Sft Mark “C”
Stair Loby = 1x15’-0”x14’-0” = 210.00 Sft.
Ver = 1x60’-0”x8’-0” = 480.00 “
Skirting = 2x7’-0”x0’-6” = 7.00 “
1x15’-0”x0’-6” = 7.50 “
Ver = 2x60’-0”x0’-6” = 60.00 “
2x8’-0”x0’-6” = 8.00 “
Fince = 2x4x1’-0”x0’-6” = 4.00 “
Room-3, 4, 5, 6, 7 & 8 = 6x14’-0”x18’-0”= 1512.00 “
6x4’-0”x6’-0” = 144.00 “
Skirting = 6x25’-0”x0’-6” = 75.00 “
=6x2x14’-0”x0’-6” = 84.00 “
= 6x4’-0”x0’-6” = 12.00 “
= 2603.50 Sft.
Deduciton :
Door = 6x3’-4”x0’-6”(-) = 9.99 Sft.
= 2593.51 Sft. Mark “D”
Item No.8(CE’s-16.4)
Exterior premium acrylic emulsion paint of approved best quality and color with high
performance against dirt picking tendency and efflorosence resistence properties along
with water resisting properties and resistance properties against fungi, fading and flaking
from authorized local agent of the manufacturer (Berger weather coat antidirt long life/
Elite master coat/ Asian apex ultima or equivalent brand) in a sealed container; applying to
exterior surface with surface preparation including cleaning drying, making free from dirt,
grease, wax, removing all chalked and scaled materials, fungus, mending good the
surface defects using sand paper and necessary scaffolding; applying 1 coat of exterior
sealer of specified brand on prepared surface; then applying 1 coat of exterior putty of
specified brand for levelling, spot filling, crack filling and cutting by sand paper/zero water
paper; finally applying 2 coats of exterior emulsion paint spreading by brush/roller/spray &
necessary scaffolding etc. upto desired finishing, elapsing specified time for drying or
recoating; all complete in all floors and accepted by the Engineer-in-charge. .
Deduction.
Ver = 1x128’-8”x5’-0” = 643.35 Sft.
Door = 12x3’-4”x7’-0” = 279.72 “
4, 5, 6, 7 = 4x8’-0”x4’-5” = 141.44 “
Window = 2x14’-0”x4’-5” = 123.76 “
4x4’-0”x3’-0” = 48.00 “
4x5’-0”x4’-5” = 88.40 “
1x11’-0”x4’-5” = 48.62 “
2x4’-11”x4’-5” = 43.49 “
(-) = 1416.78 Sft.
= 10786.73 Sft. Mark “A”
G.F. Ver East = 2x29’-6”x10’-6” = 829.50 Sft.
Cobla = 2x3x0’-10”x10’-6” = 52.29 “
2x2x1’-0”x10’-6” = 42.00 “
2x3x3’-0”x0’-8” = 12.06 “
2x6’-7”x10’-6” = 138.18 “
West = 2x60’-0”x10’-6” = 1260.00 “
Cobla = 6x0’-10”x10’-6” = 52.29 “
4x2x0’-8”x3’-0” = 16.08 “
3x2x0’-10”x9’-4” = 46.46 “
2x6’-7”x10’-6” = 138.18 “
Ver = 2x6’-6”x10’-6” = 136.50”
Porch Ceilling = 1x25’-9”x19’-0” = 489.25 “
Stair lobby = 1x13’-7”x11’-9” = 159.57 “
Beam = 2x11’-7”x1’-0” = 23.16 “
Lobby wall = 2x13’-6”x10’-0” = 270.00 “
Stair wall = 2x15’-2”x10’-0” = 303.40 “
Landing = 1x11’-9”x5’-0” = 58.75 “
Fan light = 1x10’-6”x5’-4” = 55.95 “
F.F Stair = 1x14’-4”x11’-8” = 167.23 “
Beam = 2x11’-8”x0’-8” = 15.64 “
2x11’-8”x11” = 21.47 “
2x11’-8”x1’-3” = 29.18 “
Stair wall = 2x14’-4”x9’-0” = 257.94 “
1x11’-8”x9’-0” = 105.03 “
2x15’-1”x8’-6” = 256.36 “
1x11’-8”x9’-0” = 105.03 “
= 5043.37 Sft.
Deduction Open
7x14’-6”x7’-6” = 761.25 Sft.
2x6’-6”x7’-6” = 97.50 “
Door = 6x3’-4”x7’-0” = 139.86 “
(-) = 998.61 Sft
= 4044.76 Sft. Mark B
Garrage = 3x2x(19’-0”+9’-6”)x10’-0” = 1710.00 Sft.
G.F
Ceilling = 3x19’-0”x9’-6” = 541.50 “
Store = 2x(10’-0”+9’-6”)x10’-0” = 390.00 “
Ceilling = 1x10’-0”x9’-6” = 95.00 “
Toilet = 2x2x(5’-0”+4’-0”)x5’-0” = 180.00 “
2x5’-0”x4’-0” = 40.00 “
Stair = 2x20’-0”x10’-0” = 400.00 “
West = 2x9’-0”x3’-6” = 63.00 “
Kit. = 4x2x(15’-0”+10’-0”)x10’-0” = 2000.00 “
4x15’-0”x10’-0” = 600.00 “
Ver = 1x45’-0”x5’-0” = 225.00 “
2x(45’-0”+5’-0”)x10’-0” = 1000.00 “
1x20’-0”x8’-0” = 160.00 “
= 7404.50 Sft.
Page-10
Deduction.
Col. Gate = 3x9’-6”x10’-0” = 285.00 Sft.
Door = 5x3’-4”x7’-0” = 116.50 “
Window = 5x3’-0”x4’-6” = 67.50 “
(-) = 469.00 Sft.
= 6935.50 Sft. Mark “C”
= 21766.99 Sft. = 2022.20 Sqm.
@ Tk273/-P/Sqm. Tk. 552060/-
Item No.10(CE’s-16.6)
Standard synthetic enamel paint of approved best quality and colour delivered from authorized
local agent of the manufacturer (Berger jhilik synthetic enamel/Elite quick drying/Asian decora
synthetic enamel or equivalent brand) in a sealed container, having high water resistance, high
bondibility, flexibility property; using specified brand thinner applying to metallic or wooden
surface by brass/roller/spray in 2 coats over single coat anti-corrosive coating including cleaning,
drying, making free from dirt, grease, wax, removing all chalked and scaled materials, all
complete in all floors and accepted by the Engineer-in-charge.
Window grill = VIP-1 = 1x14’-0”x4’-5” = 61.88 Sft.
2x5’-0”x4’-5” = 44.20 “
VIP-1 = 1x14’-0”x4’-5” = 61.88 Sft.
2x5’-0”x4’-5” = 44.20 “
Dinning = 1x11’-0”x4’-5” = 48.62 “
2x4’-11”x4’-5” = 43.49 “
Room No- 4, 5, 6, 7 = 4x8’-0”x4’-5” = 141.44 “
4x4’-0”x4’-5” = 70.72 “
4x5’-0”x4’-5” = 88.40 “
= 604.83 Sft.x0.50 = 302.41 Sft.
Collapsible gate = 4x9’-6”x8’-0”x1.50 = 456.00 Sft.
Garrage
Door = 5x3’-4”x7’-0”x2.25 = 262.23 “
Garden wall = 1x150’-0”x2’-6”x0.50= 187.50”
Barbed = 1x271’-0”x3’-6”x0.50= 474.25 “
Grill = 1x695’-0”x2’-0”x0.50= 695.00 “
Boundary Gate = 1x15’-0”x7’-0”x2.00 = 210.00 “
= 2587.37 Sft. = 240.37 Sqm.
@Tk. 189/-P/Sqm. Tk. 45430/-
Item No.11(SES-32.52.2)
Renewing of painting with synthetic black enamel Paint to plinth and skirting :2 coat
Item No.12(CES-32.58)
Renewing painting to old 100 mm dia rain-water pipe as per direction of Engineer-in-
charge: 2 coats
30x25’-0” = 750.00 Rft.
5x23’-0” = 115.00 “
= 865.00 Rft. = 263.64 Rm.
@Tk. 31/-P/Rm. Tk. 8,172/-
item No.13(CE’S-11.2)
Supplying, fitting and fixing M.S. flat bar clamp of 225 x 38 x 6 mm size having
bifurcated ends to door and window frames with necessary screws and encasing inside
the wall with cement concrete (1:2:4) etc. complete and accepted by the Engineer.
= 27x4= 108 Nos.
@Tk. 97/-Each. Tk. 10476/-
Item No.14(CE’S-22.2)
Supplying, fitting and fixing of 20mm dia foreign made aluminium pipe curtain rail
for door and window including cutting and fitting fixing as per required measurement
and supplying necessary screws, electric drill and rowel plug including charge of
electricity etc. complete and accepted by the Engineer.
= 7x14’-0” = 98.00 Rft.
7x13’-0” = 91.00 “
6x15’-0” = 90.00 “
4x14’-0” = 56.00 “.
= 335.00 Rft. = 102.10 Rm.
@Tk. 655/-P/Rm Tk. 66876/-
Item No.15(CE’S-19.5)
Manufacturing, supplying, fitting and fixing G.I. pipe gate of any design and shape
having 38 mm dia G.I. pipe outer frame and 19 mm dia. G.I. pipe vertical member
placed @ 75 mm c/c by welding at top and bottom of G.I. pipe frame, cutting the pipes
in proper shape and size including making semicircular band at the corners of the outer
frame without damaging the pipe, covering 50% of the gate area with 18 BWG M.S.
sheet, providing also two extra horizontal 38 mm dia G.I. pipes welded with vertical
post, providing 6 Nos. huskle domney with R.C.C. or R.C.C core pillar with cement
concrete (1:2:4) in masonry including cutting holes, mending the damages, making
provision for minimum 0.61 m x 1.4 m pocket gate having its outer frame and inner
vertical members made with 19 mm dia G.I. pipe including necessary locking
arrangements. Painting the gate with 2 (two) coats of synthetic enamel paint over a coat
of anti-corrosive priming, welding as and where necessary including necessary locking
arrangement and providing 2 Nos. 16 mm M.S. socket bolts etc. all complete as per
design and drawing and accepted by the Engineer. [Rate is excluding the cost of
painting]
1x18’-0”x8’-0” = 144.00 Sft. = 13.38 Sqm.
Item No.1(CE’S-26.3.4)
Supplying, fitting and fixing of European type glazed porcelain combi closet of white or
ivory color and size of approx. 340 mm x 730 mm x 785 mm, 36.75 kg of weight
including plastic seat cover with soft closing, cistern system, water consumption 6 litter,
siphon jet flushing system, mending good the damages and fitting, fixing, finishing etc.
complete with all necessary fittings and connection approved and accepted by the
Engineer- in- charge.
= 5 Nos.
Item No.2(CE’S-26.4.1.3)
Supplying, fitting and fixing of European type glazed combi closet, 725 mm x 360 mm
x 840 mm size, 42.7 kg of weight, including plastic seat cover, cistern system, preparing
the base with cement concrete and with wire mesh or rods if necessary, in all floors
including making holes wherever required and mending good the damages and fitting,
fixing, finishing complete with all necessary fittings and connections approved and
accepted by the Engineer- in- charge.
Special coloured (Deep Blue/ Ruby/ Rain Forest/ Green)
VIP -1, 2= 2 Nos.
Item No.4(CE’S-26.17)
Supplying, fitting and fixing of double bowl stainless steel sink with sink tray with
heavy type CI or steel brackets, 12 mm dia C.P. chain plug, 40 mm dia C.P. waste, 40
mm dia PVC waste pipe with brass coupling (750 mm length) including making hole in
walls and floors and mending good the damages, finishing etc. all complete approved
and accepted by the Engineer-in-charge. (Malaysia / Singapore / Thailand made or
equivalent).
= 1 No.
@Tk. 7390/-Each Tk. 7390/-
Item No.5(CE’S-26.18)
Supplying, fitting and fixing of 450 mm x 600 mm size and 5 mm thick unframed super
quality mirror with hard boards at the back with all necessary fitting including making
holes in walls and mending good the damages with cement mortar (1:4) etc. all
complete approved and accepted by the Engineer-in-charge. (Made in Japan or
equivalent).
= 12 Nos.
@Tk. 886/-Each Tk.10632/-
Item No.6(CE’S-26.20)
Supplying, fitting and fixing super quality 600 x 125 mm coloured glass (plate) shelf
having 5 mm thickness with fancy C.P. brackets, screws and frames including making
holes in walls and mending good the damages with cement mortar (1:4) etc. all
complete approved and accepted by the Engineer.
= 12 Nos.
Item No.7(CE’S-26.22)
Supplying, fitting and fixing super quality C.P. Towel rail of 600 mm long and 20 mm
in dia with C.P. holder including making holes in walls and mending good the damages
with cement mortar (1:4) etc. all complete approved and accepted by the Engineer.
= 12 Nos.
Item No.8(CE’S-26.25.2)
Supplying, fitting and fixing of special coloured toilet paper holder Size (150 mm x
150 mm x 126 mm) including making holes in walls and mending good the damages
with cement mortar (1:4) etc. all complete approved and accepted by the Engineer.
colored : depth along wall 155
= 12 Nos.
b)20 mm dia G.I. Pipe with wall thickness 2.65 mm, outside diameter min 26.5 mm,
weight 1.70 kg/m, can withstand min 50 kg/cm2 hydraulic pressure.
c)25 mm dia G.I. Pipe with wall thickness 3.25 mm, outside diameter min 33.3 mm,
weight 2.59 kg/m, can withstand min 50 kg/cm2 hydraulic pressure.
d)50 mm dia G.I. Pipe with wall thickness 3.65 mm, outside diameter min 59.7 mm,
weight 5.38 kg/m, can withstand min 50 kg/cm2 hydraulic pressure.
= 4 Nos.
@Tk. 158/-Each Tk.632/-
c) 25 mm dia G.I. Union
= 6 Nos.
@Tk. 195/-Each Tk.1170/-
d) 50 mm dia G.I. Union
= 9Nos.
@Tk. 416/-Each Tk.3744/-
Item No.13(CE’S-26.46)
Supplying, fitting and fixing of best quality G.I. gate valve with sealant etc. complete
approved and accepted by the Engineer- in- charge.
b) 20 mm brass gate valve
= 2 Nos.
@Tk. 484/-Each Tk.968/-
c) 25 mm brass gate valve
= 3 Nos.
@Tk. 650/-Each Tk.1950/-
d) 50 mm brass gate valve
= 3Nos.
@Tk. 1714/-Each Tk.5142/-
Item No.14(CE’S-26.52.2)
Supplying, fitting and fixing best quality faucets etc. complete approved and accepted
by the Engineer
a)12 mm Special quality CP bib cock
= 24 Nos.
@Tk. 1104/-Each Tk. 26496/-
Item No.15(CE’S-26.53.2)
Supplying, fitting and fixing best quality CP pillar cock etc. complete approved and
accepted by the Engineer
12 mm CP special heavy duty pillar cock
= 12 Nos.
@Tk. 1280/-Each Tk. 15360/-
Item No.16(CE’S-26.57.1)
Supplying, fitting and fixing CP Basin Mixture with all necessary hardware and
consumables approved and accepted by the Engineer.
= 2 Nos.
@Tk. 2732/-Each Tk.5464/-
Item No.17(CE’S-26.60)
Supplying, fitting and fixing CP Bath tub Mixture with Shower Head only including all
necessary hardware and consumables approved and accepted by the Engineer.
= 2 Nos.
@Tk. 4770/-Each Tk.9540/-
Item No.18(CE’S-26.61.4)
Supplying, fitting and fixing Special/Fancy quality C.P. concealed/ surface stop cock
with all necessary hardware and consumables approved and accepted by the Engineer .
Stop cock concealed (medium)
= 24 Nos.
@Tk. 1197/-Each Tk.28608/-
Item No.19(CE’S-26.65.2)
Supply and fitting-fixing cleansing shower for ablution including holder of following
types:
Moving type 100 mm CP shower rose
= 6 Nos.
@Tk. 1396/-Each Tk.8376/-
Item No.20(CE’S-26.66.1)
Supply and fitting-fixing hand / push shower for ablution including holder
Moving type hand shower
= 6 Nos.
@Tk. 1571/-Each Tk.15,768/-
Item No.21(CE’S-26.66.2)
Supply and fitting-fixing hand / push shower for ablution including holder
Moving type push shower
= 07 Nos.
@Tk. 967/-Each Tk.6,769/-
Item No.22(CE’S-26.72)
Supplying, fitting and fixing 12 mm dia, 600 mm long Plastic flexible lead
(connection) pipe approved and accepted by the Engineer.
= 24 Nos.
@Tk. 101/-Each Tk.2424/-
Item No.23(CES-32.86)
Clearing silt from soak well up to1.4 m dia as per direction of Engineer-in-charge.
= 2 Nos.
@Tk. 2009/-Each Tk.2480/-
Item No.24(CES-32.87.5)
Clearing sludge & night soil from septic tank removing to a safe place/distances without
affecting environment.
100 User Septic tank = 2 Nos.
@Tk. 9563/-Each Tk.9958/-
Item No.25(R’S-105)
Clearing sludge & night soil from Inspection pit as per direction of Engineer-in-charge.
= 10 Nos.
@Tk. 611/-Each Tk.6110/-
Part -“B” Tk. 4,95,351/-
Part (“A”+ ”B”) Total Tk. 2486801/-