Professional Documents
Culture Documents
com/2019/student/profile/19802
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
(Enroll User) Sign out
HOME
Q. 1
MY TEST
A carrier wave of frequency 100 MHz is frequency modulated by a sinusoidal wave of amplitude 20 V and frequency 100
kHz. The frequency sensitivity of the modulator is 25 kHz/V. The approximate bandwidth of the resultant FM signal
BOOKMARKS (using Carson’s rule) is
Solution Video Have any Doubt ?
MY PROFILE
A 200 kHz
REPORTS
B 600 kHz
BUY PACKAGE
OFFER
D 1200 kHz
EXCLUSIVE OFFER FOR OTS Correct Option
STUDENTS ONLY ON BOOK
PACKAGES
Solution :
(d)
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 1/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
(Enroll User) Sign out
QUESTION ANALYTICS
Q. 2
Nitish Thakur
The message signal is applied to a frequency modulator. The resultant FM signal has a
Course: GATE
Electronics Engineering(EC) maximum phase deviation of 3 radians. The bandwidth of this FM signal (according to Carson’s rule) is
FAQ Solution Video Have any Doubt ?
HOME
A 10 kHz
MY TEST
B 20 kHz
BOOKMARKS Correct Option
MY PROFILE Solution :
(b)
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
D 60 kHz
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 2/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
QUESTION ANALYTICS
(Enroll User) Sign out
Q. 3
HOME
B fm should be doubled without altering Am.
MY TEST
MY PROFILE Solution :
(c)
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 3/35
Q 4
2/5/2019 Q. 4 MADE EASY ONLINE TEST SERIES
If the above system is to be used as an FM detector, then the blocks A and B should be respectively
FAQ Solution Video Have any Doubt ?
Nitish Thakur
B differentiator and envelope detector
Course: GATE Correct Option
Electronics Engineering(EC)
Solution :
HOME (b)
MY TEST
BOOKMARKS
MY PROFILE
C differentiator and low-pass filter
REPORTS
OFFER
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2
122.5 W 4/35
A
A 122.5 W
2/5/2019 MADE EASY ONLINE TEST SERIES
Correct Option
Nitish Thakur
(Enroll User) Sign out
Solution :
(a)
The overall modulation index, when the given three sinusoidal message signals modulates the carrier signal
simultaneously is,
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME B 133.54 W
MY TEST
C 150 W
BOOKMARKS
D 160.5 W
MY PROFILE
BUY PACKAGE
Q. 6
ASK AN EXPERT
An AM transmitter antenna can withstand upto a radiated power of 200 W. When no message signal is applied to the
OFFER transmitter, the antenna has radiated a power of 150 W due to the unmodulated carrier. The maximum value of the
modulation index of the resultant AM signal, due to a sinusoidal message signal, that can be allowed for safe operation
EXCLUSIVE OFFER FOR OTS of the transmitter antenna is
STUDENTS ONLY ON BOOK Solution Video Have any Doubt ?
PACKAGES
A 0.333
B 0.666
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 5/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
C 0.816 (Enroll User) Sign out
Correct Option
Solution :
(c)
For an AM signal, the transmitted power is,
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
D 0.926
BUY PACKAGE
QUESTION ANALYTICS
ASK AN EXPERT
OFFER
Q. 7
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK Ten AM signals are to be transmitted through a common channel using frequency division multiplexing. A guard band of
PACKAGES 1 kHz is provided between adjacent AM signals in the spectrum. If the message signals to each AM transmitter are
restricted to 5 kHz, then the minimum bandwidth required by the common channel is
Solution Video Have any Doubt ?
A 100 kHz
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 6/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
B 109 kHz (Enroll User) Sign out
Correct Option
Solution :
(b)
BW of each AM signal is,
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
MY TEST
D 118 kHz
BOOKMARKS
QUESTION ANALYTICS
MY PROFILE
REPORTS
Q. 8
BUY PACKAGE
Consider the following statements:
S1: It is not possible to get 100% transmission efficiency using standard Amplitude Modulation.
ASK AN EXPERT S2: The transmission efficiency of a Frequency Modulated signal is 100% always.
Select the correct statement(s) using the codes given below:
OFFER FAQ Solution Video Have any Doubt ?
Solution :
(a)
In FM, 100% transmission efficiency is possible for some values of modulation index only. Those
values are : 2.41, 5.53, 8.65, ......
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 7/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
B S2 only (Enroll User) Sign out
C Both S1 and S2
D Neither S1 nor S2
Nitish Thakur
Course: GATE QUESTION ANALYTICS
Electronics Engineering(EC)
HOME Q. 9
BUY PACKAGE
B S2 only
ASK AN EXPERT Correct Option
OFFER Solution :
(b)
EXCLUSIVE OFFER FOR OTS • Image-frequency problem is more pronounced in AM receivers than FM receiver.
STUDENTS ONLY ON BOOK • Diversity reception cannot be used to eliminate the image-frequency problem.
PACKAGES • As fIF decreases, the image-frequency rejection will be poorer.
C S2 and S3 only
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 8/35
2/5/2019 MADE EASY ONLINE TEST SERIES
D S1, S2 and S3
Nitish Thakur
(Enroll User) Sign out
QUESTION ANALYTICS
Q. 10
If ωc is carrier frequency and ωm is modulating frequency, then the most suitable method for detecting the following
Nitish Thakur modulated signal is
Course: GATE
Electronics Engineering(EC) Solution Video Have any Doubt ?
A Envelope detector
HOME
MY TEST
B Synchronous detector
Correct Option
BOOKMARKS
Solution :
MY PROFILE (b)
REPORTS
BUY PACKAGE
ASK AN EXPERT
C Ratio detector
OFFER
QUESTION ANALYTICS
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 9/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Q. 11
Nitish Thakur
(Enroll
An FM signal with modulation index β = 2 is transmitted through an ideal band-pass filter withUser) Sign out
midband frequency fc and
bandwidth 5fm, where fc is the carrier frequency and fm is the frequency of the sinusoidal modulating wave. If fc = 1000
kHz and fm = 10 kHz, then the highest frequency component that will present in the signal at the filter output is ________
kHz.
FAQ Solution Video Have any Doubt ?
1020
Correct Option
Nitish Thakur
Course: GATE
Electronics Engineering(EC) Solution :
1020
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
QUESTION ANALYTICS
OFFER
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 10/35
12
12
2/5/2019 MADE EASY ONLINE TEST SERIES
Correct Option
Nitish Thakur
(Enroll User) Sign out
Solution :
12
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
QUESTION ANALYTICS
HOME
MY TEST Q. 13
OFFER
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 11/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
(Enroll User) Sign out
QUESTION ANALYTICS
Q. 14
5
HOME Correct Option
MY TEST Solution :
5
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
For a single-tone AM signal, the power carried by the sidebands is 10% of the total transmitted power. The modulation
index of the AM signal is ________.
Solution Video Have any Doubt ?
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 12/35
2/5/2019 MADE EASY ONLINE TEST SERIES
0.47 (0.45 - 0.49)
Nitish Thakur Correct Option
(Enroll User) Sign out
Solution :
0.47 (0.45 - 0.49)
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
QUESTION ANALYTICS
OFFER
Nitish Thakur
Course: GATE QUESTION ANALYTICS
Electronics Engineering(EC)
HOME
Q. 17
MY TEST Consider the periodic message signal shown in the figure below:
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT The message signal is applied to a phase modulator to modulate the phase of a sinusoidal carrier. If the phase
sensitivity of the modulator is then the maximum frequency deviation of the resultant PM signal will be
OFFER
Solution Video Have any Doubt ?
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK A 1 kHz
PACKAGES
B 2 kHz
Correct Option
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 14/35
2/5/2019 Solution : MADE EASY ONLINE TEST SERIES
(b) Nitish Thakur
(Enroll User) Sign out
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
C 4 kHz
MY TEST
BOOKMARKS 8 kHz
D
MY PROFILE
QUESTION ANALYTICS
REPORTS
BUY PACKAGE
Q. 18
OFFER
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 15/35
This message signal is applied to a frequency modulator whose frequency sensitivity is 5 kHz/V The maximum phase
2/5/2019 This message signal is applied to EASY
MADE a frequency modulator
ONLINE TEST SERIES whose frequency sensitivity is 5 kHz/V. The maximum phase
deviation of the resultant FM signal is
Nitish Thakur
FAQ Solution Video Have any Doubt ?
(Enroll User) Sign out
A 0.6 rad
Nitish Thakur C
Course: GATE
Electronics Engineering(EC) Correct Option
HOME Solution :
(c)
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
OFFER
QUESTION ANALYTICS
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES
Q. 19
A message signal m(t) = 5sinc(2000t ) V is applied to an FM modulator, whose frequency sensitivity is kf = 4 kHz/V. The
modulation index (or deviation ratio) of the resultant FM signal will be
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 16/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Solution Video Have any Doubt ?
Nitish Thakur
(Enroll User) Sign out
A 5
B 10
C 20
Correct Option
Nitish Thakur
Course: GATE
Electronics Engineering(EC) Solution :
(c)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
D 40
OFFER
Q. 20
Consider a frequency modulator with frequency sensitivity of 10 kHz/V and a phase modulator with phase sensitivity of
4 rad/V. When a sinusoidal message signal is applied to both the modulators individually, the maximum phase deviation
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 17/35
f h d l d i l h fb h h i d l i h f f h i li
2/5/2019 of the modulated signals at the output
MADE EASY of bothTEST
ONLINE the given
SERIESmodulators is same. The frequency of the message signal is
FAQ Solution Video
Nitish Have any Doubt ?
Thakur
(Enroll User) Sign out
A 2.5 kHz
Correct Option
Solution :
(a)
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
B 5 kHz
REPORTS
BUY PACKAGE C 20 kHz
ASK AN EXPERT
D 40 kHz
OFFER
Q. 21
A 107 kHz
B 110 kHz
Correct Option
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
C 114 kHz
OFFER
QUESTION ANALYTICS
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 19/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Q. 22
Nitish Thakur
The spectrum of the message signal m(t) is shown below in Figure (a). This signal is processed
(Enroll User)by the system shown
Sign out
below in Figure (b).
Nitish Thakur
Course: GATE
Electronics Engineering(EC) If each filter has a passband gain of 1, then the correct representation of the spectrum of the output signal y(t) will be
FAQ Solution Video Have any Doubt ?
HOME
A
MY TEST
BOOKMARKS
MY PROFILE
REPORTS B
BUY PACKAGE
ASK AN EXPERT
OFFER
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 20/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
D (Enroll User) Sign out
Correct Option
Nitish Thakur
Course: GATE
Solution :
(d)
Electronics Engineering(EC)
The spectrum of the signals at various points in the given system can be plotted as follows:
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 21/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
(Enroll User) Sign out
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
QUESTION ANALYTICS
MY TEST
BOOKMARKS
Q. 23
MY PROFILE In a DSBSC system, the message signal m(t) is multiplied with the carrier signal c(t) = 4cos to form a modulated
signal s(t). If m(t) = 2sinc(2t) – sinc2(t ) and fc = 100 Hz, then the correct representation of the spectrum of the
REPORTS modulated signal s(t) will be
BUY PACKAGE
Solution Video Have any Doubt ?
ASK AN EXPERT
A
OFFER
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 22/35
2/5/2019 MADE EASY ONLINE TEST SERIES
B
Nitish Thakur
(Enroll User) Sign out
C
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
BOOKMARKS Solution :
(c)
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 23/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
(Enroll User) Sign out
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE D
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
When a carrier signal is amplitude modulated by a sinusoidal message signal m1(t), the transmission efficiency of the
resultant AM signal is 20%. When another sinusoidal message signal m2(t) is added to m1(t), without changing any other
parameter, the antenna current of the AM transmitter
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 is increased by 5%. If the same AM transmitter with same carrier24/35
y
2/5/2019 signal is excited with m2(t) MADE then
alone, EASY the
ONLINE TEST SERIES
transmission efficiency of the resultant AM signal will be
Nitish
Solution Thakur
Video Have any Doubt ?
(Enroll User) Sign out
A 5.88%
B 11.36%
Correct Option
Solution :
Nitish Thakur (b)
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 25/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
(Enroll User) Sign out
C 20.4%
D 27.44%
Q. 25
HOME
A double conversion superheterodyne receiver is designed with fIF(1) = 30 MHz and fIF(2) = 3 MHz. Local oscillator
MY TEST frequency of each mixer stage is set at the lower of the two possible values. When the receiver is tuned to a carrier
frequency of 300 MHz, insufficient filtering by the RF and first IF stages results in interference from three image
BOOKMARKS frequencies. Those three image frequencies are
FAQ Solution Video Have any Doubt ?
MY PROFILE
A 294 MHz, 360 MHz, 366 MHz
REPORTS
OFFER
Solution :
EXCLUSIVE OFFER FOR OTS (c)
STUDENTS ONLY ON BOOK
PACKAGES
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 26/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
(Enroll User) Sign out
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
D 282 MHz, 288 MHz, 294 MHz
BUY PACKAGE
OFFER
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 27/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
(Enroll User) Sign out
The intermediate frequency of the receiver is 450 kHz. If the maximum frequency of the modulating signal is 5 kHz, then
the minimum bandwidth required by the IF amplifier of the receiver is
FAQ Solution Video Have any Doubt ?
Course: GATE
Electronics Engineering(EC)
B 12.5 kHz
HOME
C 15 kHz
MY TEST Correct Option
BOOKMARKS Solution :
(c)
Minimum bandwidth required for an IF amplifier of an AM superheterodyne receiver is,
MY PROFILE
REPORTS
BUY PACKAGE
D 16 kHz
ASK AN EXPERT
Solution :
1.21 (1.10 - 1.32)
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
MY PROFILE
Q. 28
REPORTS
Consider a message signal m(t ) with power spectral density SM( f ) and a pre-emphasis circuit with transfer function H(
BUY PACKAGE f ) as follows:
ASK AN EXPERT
OFFER
EXCLUSIVE OFFER FOR OTS The positive scaling factor “K” is chosen so that the average power of the emphasized message signal is same as that of
STUDENTS ONLY ON BOOK the original message signal m(t). If (W/f0) = 2, then the value of “K ” will be ________.
PACKAGES FAQ Solution Video Have any Doubt ?
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
QUESTION ANALYTICS
BUY PACKAGE
ASK AN EXPERT
Q. 29
OFFER
A Gaussian message signal is applied to a frequency modulator. If the frequency sensitivity of the
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
modulator is then the maximum phase deviation of the resultant FM signal will be __________ × 103
PACKAGES
radians.
FAQ Solution Video Have any Doubt ?
Nitish Thakur
Solution :
(Enroll User) Sign out
15.75 (15.70 - 15.80)
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
QUESTION ANALYTICS
ASK AN EXPERT
OFFER
Q. 30
120
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 Correct Option
31/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
Solution :
(Enroll User) Sign out
120
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
QUESTION ANALYTICS
MY TEST
BOOKMARKS Q. 31
MY PROFILE A message signal which is bandlimited to fm is multiplied with a carrier signal to form a DSBSC signal
s(t). This DSBSC signal is processed by the demodulator shown below.
REPORTS
BUY PACKAGE
ASK AN EXPERT The frequency of the receiver carrier is The average power of the message signal m(t) is 10 W. If Δf = 10
Hz, then the average power of the output signal y(t) will be _________ W.
OFFER
EXCLUSIVE OFFER FOR OTS FAQ Solution Video Have any Doubt ?
STUDENTS ONLY ON BOOK
PACKAGES 1.25 (1.24 - 1.26)
Correct Option
Solution :
1.25 (1.24 - 1.26)
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 32/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
(Enroll User) Sign out
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
QUESTION ANALYTICS
MY TEST
BOOKMARKS
Q. 32
MY PROFILE A message signal m(t) and a carrier signal c(t) are applied to an amplitude modulator shown below.
REPORTS
BUY PACKAGE
The message signal m(t) is band-limited to The BPF has a unity passband gain over a bandwidth
ASK AN EXPERT of 2fm centered at fc. The input-output characteristic of the non-linear device is If the average
power of the message signal m(t) is 6 W, then the percentage transmission efficiency of the resultant AM signal will be
OFFER ________ %.
FAQ Solution Video Have any Doubt ?
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
60
PACKAGES
Correct Option
Solution :
60
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 33/35
2/5/2019 MADE EASY ONLINE TEST SERIES
Nitish Thakur
(Enroll User) Sign out
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
BOOKMARKS
MY PROFILE
QUESTION ANALYTICS
REPORTS
BUY PACKAGE
Q. 33
OFFER This AM signal is to be demodulated by an envelope detector. If the detector has to follow the modulated signal
envelope properly, then the maximum allowed value of the time constant (RC) of the envelope detector will be _______
EXCLUSIVE OFFER FOR OTS ms.
STUDENTS ONLY ON BOOK
FAQ Solution Video Have any Doubt ?
PACKAGES
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 34/35
Solution :
Solution :
2/5/2019 MADE EASY ONLINE TEST SERIES
0.50 (0.48 - 0.52)
Nitish Thakur
(Enroll User) Sign out
Nitish Thakur
Course: GATE
Electronics Engineering(EC)
HOME
MY TEST
QUESTION ANALYTICS
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1109&t=a&testType=2 35/35