Professional Documents
Culture Documents
Product Data
Dry Film 100 – 150 µm (4 - 6 mils) per coat Airless Spray Pump Ratio: 30:1 (minimum)
Thickness Don't exceed 250 µm (10 mils) in a single GPM Output: 3.0 (minimum) 12
coat. Excessive film thickness over inorganic liters/min.
zincs may increase damage during shipping Material Hose: 3/8” I.D. (minimum)
or erection. A mist coat over inorganic zincs is Tip Size: .017”-.021”
recommended to minimize bubbling. Output PSI: 2100-2300
Filter Size: 60 mesh
Solids Content By Volume: 60±2% Teflon packings are recommended and
available from the pump manufacturer.
2
Theoretical 24 m /l at 25µm
Coverage Rate 2 Brush & Roller Recommended for small areas or touch-up
4.8 m /l at 125µm
(General) only. Use medium bristle brush or good
Allow for loss in mixing and application
quality short nap roller. Avoid to rebrushing
and rerolling. Use Carboline Thinner #33 up
Dry Temp. Continuous: 93°C (200°F)
Resistance to 25% by volume for best results. Two coat
Non-Continuous: 121°C (250°F)
may be required to obtain desired apparence
and DFT.
CARBOLINE ITALIA S.p.A. – Via Milano, 150 – 20093 Cologno Monzese (Mi) – Tel. +39 02 253751 Fax +39 02 2537560
Carboguard®190 HB (pag.2)
08/06 – 03/01USA
To the best of our knowledge the technical data contained herein is true and accurate on the date of publication and is subject to change without prior notice. User must contact Carboline
Company to verify correctness before specifying or ordering. No guarantee of accuracy is given or implied. We guarantee our products to conform to Carboline quality control. We assume no
responsibility for coverage, performance or injuries resulting from use. Liability, if any, is limited to replacement of products. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS
MADE BY CARBOLINE, EXPRESS OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.