Professional Documents
Culture Documents
Frequency
Analysis of a
Beam
USING ANSYS
Name:
Harold David Villacís Jara
The beam is a W410x85 beam made of aluminum A6061-T6 and have a length of 2m.
1. The CAD model was drawn in Solidworks with the following characteristics. Then it was
saved as a Parasolid part.
2. The blocks were selected and connected in Workbench. In Engineering Data the material
Aluminum A6061-T6 was created with its properties.
3. The mesh of the model was done with an element size of 10 mm.
4. The following constraints were selected and then the system was solved.
5. Results of the first three modes of vibration. The analysis was done in 3D.
5.1 At 28.359 Hz
5.2 At 52.69 Hz
5.3 At 153.17 Hz