Professional Documents
Culture Documents
BIS CODE: INDIAN STANDARD For Structural Engineering
BIS CODE: INDIAN STANDARD For Structural Engineering
IS: 206 -1992 (4th Rev) Tee & strap hinges - Specification.
IS: 730 -1978 (2nd Rev) Hook bolts for corrugated sheet
roofing - Specification.
IS: 801 -1975 (1st Rev) Code of Practice for use of cold -
formed light gauge steel structural
members in general building
construction.
IS: 802 -1977 (2nd Rev) Code of Practice for use of structural
steel in (Part-1) overhead
transmission line towers - Loads
and permissible stresses.
IS: 806 -1968 (1st Rev) Code of Practice for use of steel
tubes in general building
construction.
IS: 808 -1989 (3rd Rev) Dimension for hot rolled steel beam,
channel and angle sections.
IS: 811 -1987 (2nd Rev) Cold formed light gauge structural
steel section - Specification.
IS: 875 -1987(2nd Rev) Code of Practice for design loads for
buildings & structures.
(Part 1)
Dead loads
(Part 2)
Imposed loads.
(Part 3)
Wind loads.
(Part 4)
Snow loads.
(Part 5)
Special loads & load combinations.
IS:1363 -1992 (3rd Rev) Hexagon head bolts, screw and nuts
(Parts 2 & 3) of product grade C-Screw (M5 to
M64)
IS:1364 -1992 (3rd Rev) Hexagon head bolts, screws and nuts
(Part 4) of product grade A and B - Thin nuts
(M1.6 to M64)
Pretreatment
(Part 1)
Painting
(Part 2)
IS:4049 -1988 (2nd Rev) (Part 1) Specification for formed ends for
tanks and pressure vessels.
strips.
Design criteria.