Professional Documents
Culture Documents
Node B Integration Guide
Node B Integration Guide
1 UMTS Architecture................................................................................................................................. 2
1.1 Design Team: 2
1.2 Radio Planning Team: 2
1.3 Onsite Commissioning Team 3
1.4 Node B Integration Team: 3
1.4.1 OAM & Hardware Scripts:.....................................................................................................3
1.4.2 ARW Script: 3
1.4.3 Add Cell Network Scripts:....................................................................................................3
2.2 CCR Tool - Workflow 11
2.3 CCR Tool - Create CCR-Form Template...........................................................................................11
2.4 Loading Add_Cell Network Scripts:...................................................................................................14
3. IUB Script: 24
4. Loading License................................................................................................................................. 27
5. Adjust License.................................................................................................................................... 29
6. Update Parameters 31
7. Create back CV and set as startable on NodeB:.................................................................................32
8. Software Upgrade using SMO 34
9. Conclusion 39
INTRODUCTION:
This document will describe the NodeB integration process flow which will be used when integrating a
new node B, as well as demonstrating the CCR process from the delivery of data fill to the production
and loading of XML and MO script.
1 UMTS Architecture
The integration team should be provided and updated with the LLD (Low Level Design) for the 3G Node
B integration from the design team
LLD.xls
Has to generate the two CCR forms (excel sheet) one for Hardware Scripts and other for Cell Network.
The names of two CCR sheets are:-
AddCellNetworkP7.xls
AddCellNetworkP7_V
5_0.xls
Responsible for the installation and commissioning the NodeB, Loading OAM and External Hardware
scripts
After loading OAM and Hardware script. The integration team can start the integration
To generate the XML files required for the WDCMA RAN integration, a CCR web based tool is used.
Both scripts are generated by referring to the LLD .Those two scripts will be emailed to the onsite
commissioning team to load it on to NodeB.
Integration team will generate and load the ARW script on to the OSS Common Explorer by using the
ARW (Add RBS Wizard) tool.
From the AddCellNetworkP7.xls CCR form, Cell scripts are generated and loaded on to the OSS
Common Explorer by creating Planned Area and importing the.xml files to the planned areas.
2. Add RBS Wizard
• Open OSS
• Go to WCDMA RAN Explorer
• Use your favourite FTP client to transfer files to OSS
• Upload the ARW script to : /var/opt/ericsson/nms_umts_arw_reg/dat/xml/import
• Open new planned configuration
• Enter the name of the planned configuration then click ok
CCR Tool is the official internal tool that is used in producing .xml scripts.
2.2 CCR Tool - Workflow
Execute/generate scripts
CCR form is an excel spreadsheet and it will be emailed to you if you choose that option when creating a
template.
After CCR template is populated, you can create a project in the tool and import your spreadsheet.
- Scripts will be emailed to you or you can extract them from Configuration column.
- Once the scripts are generated the icon will be changed from
to
2.4 Loading Add_Cell Network Scripts:
Import the
following Scripts
in following order
• ar
e
a
s.
x
m
l
• ad
d
_
c
el
l.xml
• add_hsdsch.xml
• add_eul.xml
• coveragerelation.xml
• cell update
After loading all the scripts, activate the Planned Configuration
Go to moshell and check if the cells and the channels are created
2. Create Planned Configuration for GSM Relation :<Site_ID>_GSM
Import the following Scripts in following order:
• add_gsmcell.xml
• gsmcell_relations.xml
Then start
4. Loading License
• Upload the license to :
/var/opt/ericsson/integration/xml_scripts/lkf
Then execute
5. Adjust License
Parameter_Setting_2_Carriers.mo
Choose your parameters script
Also check the RBS parameter IubDataStreams, maxHsRate must be modified depending on the
number of E1s
Go to Moshell :
CVMS <CV_Name>
CVLS <CV_Name>
After creating the CV we unlock the IUB and the site name
8. Software Upgrade using SMO
Locate the desired node and start the wizard using the upgrade function in SMO
Choose the upgrade package then click next
Choose the appropriate ftp server area
Check the upgrade steps to be executed
Then click finish
9. Conclusion
Once the upgrade is completed we list the iub status for the node ( lst . site name), we print the traffic
status (get radiol), we check the license status (license lkf), we print the list of the active alarm (alt)