Professional Documents
Culture Documents
447
Heavy section
Locknuts and lockwashers
Bearing Series 12, 13, 222, 223, 232
N 00 Locknut
W 00 Lockwasher
All mounting accessories are manufactured in accordance with ABMA standard 8.2 latest revision. For more information on threads please consult this standard.
For recommended bearing seat tolerances see page 359.
lbs in
448
Heavy section
Locknuts and lockwashers
Bearing series 12, 13, 222, 223, 232
N 00 Locknut
W 00 Lockwasher
All mounting accessories are manufactured in accordance with ABMA standard 8.2 latest revision. For more information on threads please consult this standard.
For recommended bearing seat tolerances see page 359.
Dimensions
Thread pitch dia. Threads d1 C G I E F Locknut Lockwasher
d2 per +1⁄64 +1⁄32 +1⁄64 +1⁄64 +1⁄64
max min inch max –0 –0 –0 –0 –0 D1 L T d4
in
5 9 3 1 1 1 3 7
0.3707 0.3681 32 ⁄16 ⁄32 ⁄8 ⁄16 ⁄8 ⁄16 ⁄4 ⁄32 0.042 0.414
13 3 15 1 1 1 7 5
0.4487 0.4461 32 ⁄32 ⁄8 ⁄32 ⁄16 ⁄8 ⁄16 ⁄8 ⁄16 0.042 0.492
1 3 15 1 1 5 5
0.5657 0.5627 32 ⁄2 ⁄8 ⁄32 ⁄16 ⁄8 ⁄64 1 ⁄16 0.042 0.609
9 13 1 1 1 5
0.6437 0.6407 32 ⁄16 ⁄32 ⁄2 ⁄16 ⁄8 ⁄64 11⁄8 11
⁄32 0.042 0.687
23 7 17 1 3 5
0.7607 0.7573 32 ⁄32 ⁄16 ⁄32 ⁄16 ⁄16 ⁄64 13⁄8 3
⁄8 0.042 0.809
7 15 19 1 3 3
0.9487 0.9453 32 ⁄8 ⁄32 ⁄32 ⁄16 ⁄16 ⁄32 19⁄16 13
⁄32 0.050 0.999
1.1369 1.1329 18 11⁄16 15
⁄32 19
⁄32 3
⁄32 3
⁄16 3
⁄32 13⁄4 13
⁄32 0.050 1.203
1.3399 1.3359 18 11⁄4 1
⁄2 5
⁄8 3
⁄32 3
⁄16 3
⁄32 21⁄16 7
⁄16 0.050 1.406
1.5269 1.5224 18 115⁄32 17
⁄32 21
⁄32 3
⁄32 5
⁄16 3
⁄32 21⁄4 7
⁄16 0.058 1.593
1.7309 1.7204 18 111⁄16 17
⁄32 11
⁄16 1
⁄8 5
⁄16 3
⁄32 217⁄32 7
⁄16 0.058 1.805
449
Heavy section
Locknuts and lockwashers
Bearing series 12, 13, 222, 223, 232*
AN 21 Locknut
W 21 Lockwasher
All mounting accessories are manufactured in accordance with ABMA standard 8.2 latest revision. For more information on threads please consult this standard.
For recommended bearing seat tolerances see page 359.
lbs in
*For bearings in series 232, larger than a 23244, use locknuts and lockplates on pages 452 and 453.
450
Heavy section
Locknuts and lockwashers
Bearing series 12, 13, 222, 223, 232*
AN 21 Locknut
W 21 Lockwasher
All mounting accessories are manufactured in accordance with ABMA standard 8.2 latest revision. For more information on threads please consult this standard.
For recommended bearing seat tolerances see page 359.
Dimensions
Thread pitch dia. Threads d1 C G I E F Locknut Lockwasher
d2 per +1⁄16 +1⁄32 +1⁄16 +1⁄16 +1⁄64
max min inch max –0 –0 –0 –0 –0 D1 L T d4
in
*For bearings in series 232, larger than a 23244, use locknuts and lockplates on pages 452 and 453.
451
Light section
Locknuts, lockwashers and lockplates
Bearing series 230, 231, 23248 and larger
N 022 Locknut
W 022 Lockwasher
All mounting accessories are manufactured in accordance with ABMA standard 8.2 latest revision. For more information on threads please consult this standard.
For recommended bearing seat tolerances see page 359.
lbs in
452