The document defines parameters, their definitions, units, and typical values used in modeling the control system of a steam turbine generator. Key parameters include:
- Mode (Droop or Isoch), Droop1 and Droop2 (speed droop percentages), P1 and P2 (proportional gains), I1 and I2 (integral gains), Tm1 and Tm2 (turbine time constants).
- Hpa, HPb, Hpc (extraction flow limits), Efmax (max extraction flow), ExtFlow (extraction flow percentage), ExtPress (extraction pressure percentage).
- Smax (max power), Sa, Sb, Sc (power limits at different extractions), Ramp
The document defines parameters, their definitions, units, and typical values used in modeling the control system of a steam turbine generator. Key parameters include:
- Mode (Droop or Isoch), Droop1 and Droop2 (speed droop percentages), P1 and P2 (proportional gains), I1 and I2 (integral gains), Tm1 and Tm2 (turbine time constants).
- Hpa, HPb, Hpc (extraction flow limits), Efmax (max extraction flow), ExtFlow (extraction flow percentage), ExtPress (extraction pressure percentage).
- Smax (max power), Sa, Sb, Sc (power limits at different extractions), Ramp
The document defines parameters, their definitions, units, and typical values used in modeling the control system of a steam turbine generator. Key parameters include:
- Mode (Droop or Isoch), Droop1 and Droop2 (speed droop percentages), P1 and P2 (proportional gains), I1 and I2 (integral gains), Tm1 and Tm2 (turbine time constants).
- Hpa, HPb, Hpc (extraction flow limits), Efmax (max extraction flow), ExtFlow (extraction flow percentage), ExtPress (extraction pressure percentage).
- Smax (max power), Sa, Sb, Sc (power limits at different extractions), Ramp