Professional Documents
Culture Documents
AD 432 - Wind Loads On Building Canopies, July 2019
AD 432 - Wind Loads On Building Canopies, July 2019
AD 432:
Wind loads on building canopies
The purpose of this AD note is to direct designers’ be assessed using the rules for free standing larger than those in the Eurocode, particularly for
attention to PD 6688-1-4 as a source of design canopies fully blocked at one edge (the back or shallow angle canopies attached at a relatively
loads on building canopies and useful data and the side, depending on the wind direction). The low level – so it is particularly important that the
guidance relating to other topics. forward reference in PD 6688-1-4 section 3.5 is PD is consulted.
A regular question for the SCI Advisory team incorrect – it should direct designers to section 7.3 More generally, PD 6688-1-4 is a valuable
relates to wind loading on canopies attached to of the Eurocode for loads on canopies. resource with helpful guidance on such topics as
buildings. A canopy may typically be provided It should be noted that when using the data non-simultaneous loads on faces, assessment of
over the entrance to a building, but questions provided in the PD, the reference height is the dominant openings, re-entrant corners and inset
arise as there are no coefficients provided in height of the building, not the height of the faces.
BS EN 1991-1-4. canopy. This is because gusts on the upper parts
Designers should refer to PD 6688-1-4, section of the building can be directed down the building
3.5, which provides force coefficients for canopies face onto the canopy. Contact: Richard Henderson
attached to the lower half of a building. Canopies The overall force coefficients tabulated in the Tel: 01344 636555
attached to the upper half of a building should PD in the downward direction are considerably Email: advisory@steel-sci.com
NSC
30 July/Aug 19