Professional Documents
Culture Documents
Cerrar SIS
Pantalla anterior
Desarmado y Armado
D342 VEHICULAR ENGINE FOR D8K TRACTOR
Número de medio -SENR7010-01 Fecha de publicación -01/09/1977 Fecha de actualización -12/10/2001
Precombustion Chambers
SMCS - 1106-11; 1106-12
start by:
2. Remove nuts (1) and washers (3) from the cylinder head studs.
https://127.0.0.1/...isweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage=/sisweb/sisweb/techdoc/techdoc_print_page.jsp[30/11/2020 08:38:24]
D342 VEHICULAR ENGINE 76V00001-00504 (MACHINE)(UEG0890S - 00) - Sistemas y componentes
1. Install a new O-ring seal (1) on the precombustion chamber (2). Put liquid soap on the seal.
2. Install a new gasket (4) on the chamber. Use a 1P6442 Gasket with identification "4D" on it.
3. Put 9M3710 Anti-Seize Compound on the threads of the chamber and cylinder head studs (3).
4. Install precombustion chamber with 1P6442 Gasket in cylinder head. Use tool (A) to tighten the chamber to a
torque of 200 lb.ft. (270 N·m). If the glow plug hole stops in range 1, 2 or 3, remove the precombustion chamber
and remove the 1P6442 Gasket. Assemble with the gasket. If the glow plug hole stopped in: a) range 1-install
5H2579 Gasket, b) range 2-install 1P6441 Gasket, c) range 3- install 7N6758 Gasket.
5. Install the washers and nuts on the cylinder head studs. Tighten the nuts to a torque of 60 lb.ft. (80 N·m). Tighten
the nuts again to a torque of 120 lb.ft. (160 N·m).
end by:
Copyright 1993 - 2020 Caterpillar Inc. Mon Nov 30 08:38:05 EST 2020
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://127.0.0.1/...isweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage=/sisweb/sisweb/techdoc/techdoc_print_page.jsp[30/11/2020 08:38:24]