Professional Documents
Culture Documents
Experiment No. 8
ANSWER SHEET
Q1. What controller pins are used for the TxD and RxD in the
microcontroller used?
Q2. What are the addresses of the transmit and receive data
registers?
$00CE:00CF is the used address for both transmit and receive data
registers.
Q3. How many data bits can be sent with the serial interface in the
microcontroller used? 9 data bits
Q8. Find the noise Margin (High and Low) for 5V, 3.3V and 1.8V
CMOS logic families. Complete the table.
Q4. Assume an 8MHz bus clock, what is the fastest data rate
available in the microcontroller used?
4MHz