Professional Documents
Culture Documents
Table of Contents
Product Introduction 04
About N Series 04
Product Dimensions 05
Product Specifications 06
Product Components 08
Cabinet Introduction 08
Product Installation 11
Floor Installation 12
Wall-mounting Solution 13
Product Wiring 15
Maintenance 17
Preparation Tools 17
Safety Information
WARNING!
Please read the Safety Measures listed in this section carefully before
installing, switching on, operating and maintenance of this product.
The following marks on the product and in this manual indicate important safety measures.
WARNING: Be sure to understand and follow all safety guidelines, safety instructions, warnings and
precautions listed in this manual.
This product is for professionals use only!
This product may result in serious injury or death due to fire hazard, electric shock or on dropping.
Please read this manual carefully before installing, powering up, operating and maintenance of this
product.
Follow safety instructions in this manual and on the product. If you have any questions, please seek
help from Absen.
Beware of Fire!
• Use a circuit breaker or fuse protection to avoid fire caused by power supply cables overloading.
• To avoid fire caused by power supply cables overloading, do not connect to the same power supply
point for more than 8 cabinets(N4W 6 cabinets) at a voltage of 100-120V, or 16 cabinets(N4W 12
cabinets) at a voltage of 200-240V.
• Maintain good ventilation around the display screen, controller, power supply and other devices, and
keep a minimum 0.1 meter gap with other objects.
• Do not stick or hang anything on the screen.
• Do not modify the product, do not add or remove parts.
• Do not use the product in case ambient temperature is over 40℃.
Beware of Injury!
• Warning: Wear a helmet to avoid injury.
• Ensure any structures used to support, fix and connect the equipment can withstand at least 10
times the weight of all the equipment.
• When stacking products, please hold products firmly to prevent tipping or falling.
• Ensure all components and steel frames are securely installed.
• When installing, repairing, or moving the product, ensure the working area is free of obstacles, and
ensure the working platform is securely and stably fixed.
• In the absence of proper eye protection, please do not look directly at the lit screen from within a 1
meter distance.
• Do not use any optical devices that have converging functions to look at the screen to avoid burning
the eyes.
LED lamps used in the module are sensitive and can be damaged by ESD (electrostatic discharge).
To prevent damage to LED lamps, do not touch when the device is running or switched off.
WARNING: The manufacturer shall not bear any responsibility for any incorrect, inappropriate,
irresponsible or unsafe system installation.
Product Disposal
• Any component that has a recycling bin label can be recycled.
• For more information on collecting, reusing and recycling, please contact the local or regional waste
management unit.
• Please contact us directly for detailed environmental performance information.
Product Introduction
About N Series
N3/N4/N4W/N5 are indoor fixed mounted high-definition display with unique competitive advantages. Designed in a long
rectangle shape with full aluminum structure, it looks like a tablet. Its cabinets are light and thin, only 8.8kg/cabinet(N4W
9.2kg), and only 54mm thickness. The thin cabinets are made of aluminum, use magnetic modules, support complete
front and rear installation and complete front and rear maintenance, and don’t require a maintenance channel.
The product is equipped with smart monitoring system, and uses a fan-less design for cabinet and power supply,
ensuring it is super-quiet, with exceptional heat dissipation. It features highly flat and smooth display plane, precision
cabinet and module assembly, and very strong structure. Standard Cabinet Dimension is: 1152X288X54mm.
The product is primarily used at hotel ballrooms, TV stations, commercial chain stores, branded snack stores, transpor-
tation hubs, supermarkets, banks, churches, airports, railway stations, theaters, company lobbies, high-end clubhouses,
museums, large conference rooms, and for various other applications.
Nowadays, with the LED display industry becoming severely standardized, N Series stands out among all similar
products with its delicate appearance, thin and light structure, excellent display effect, full-featured functions, easy
maintenance, smart monitoring and other unique advantages, providing good business opportunities for capable and
influential contractors, service providers and advertisers.
Front
Rear
Product Dimensions
1152mm 54mm
288mm
LED
Cabinet Dimension
288mm
288mm
Module Dimension
Product Specifications
Pixel Configuration SMD 2121 SMD 2121 SMD 1921 SMD 2121
• Stylish and sophisticated appearance. Looks like a tablet, and the rectangular appearance makes it easy to change
dimensions.
• Light and thin product. Cabinet dimension 1152x288mm, weighs only 8.8kg/cabinet(N4W 9.2kg), with only 54mm
thickness, with more than 25% reduction in weight and over 35% reduction in thickness compared to similar products in
the market.
• Brand new smart monitoring. Monitoring card not required to monitor signal receiving cards, modules, cables, tempera-
ture, LED, etc. A breakthrough from traditional architecture, reducing wiring and failure points.
• Supports PCs, tablets, mobile phones and other smart terminals to connect to the display for monitoring screen
operation.
• Smart Modules: Module can store ID number, production date, order information, usage duration, color coordinates,
current and other information. More convenient and practical.
• Complete front or rear maintenance. Perfect for environments where only rear maintenance is available like window
display, but also perfect for environments where only front maintenance is allowed, such as wall mounted installation at
malls.
• Complete front installation and maintenance can be adopted for wall-mounted installation, with magnetic modules,
power supply, signal receiving card, HUB, cable wirings, etc., accessible from the front, ensuring easy and fast
servicing, and zero maintenance channel requirement.
• Magnetic modules enable fast and convenient module installation and disassembly without screws.
• Cabinets can be installed both horizontally and vertically. The module can be rotated along with cabinets by 90 degrees
for assembly (rotating the module and cabinet together does not affect the viewing angle), ensuring the screen can be
installed vertically, to meet customers’ different installation requirements.
• Fan-less design for cabinets and power supply, eliminating noise and reducing power consumption. More energy
savings.
• Uses crystal head sockets and reliable power plug sockets for signal and power cable connections between cabinets
and signal source, and power plug and socket, for faster and safer connections.
• Easy cabinet testing and operating status monitoring with external test button and indicators.
• High definition ensures excellent and super clear display effect. No ghost shadows or caterpillar problems, with high
grayscale, high refresh rate, and high grayscale at low brightness, highlighting exceptional display affect.
• Super large viewing angle, high contrast ratio: 160/140 no dark spots phenomenon. Uses TOP type SMD LED,
combined with light trap mask design, ensuring excellent optical effects.
• Supports Absen’s 3rd Generation Pixel-by-Pixel Correction (A3C) technology, ensuring even images. Different batches
produced within one year can be mixed and used together. Module is designed with built-in data correction memory, so
that users can directly replace modules without cumbersome setup, and can easily import and calibrate data.
Product Components
Cabinet Introduction
Positioning Column
Power input
Cabinet structure: Full aluminum cabinet is extremely thin and light. Cabinet can be installed either horizon-
tally or vertically.
Horizontal Installation
Vertical Installation
Modular structure: Magnetic modules. Relative to the cabinet structure, modules can be rotated by 90
degrees for installation, so that the cabinet can be installed vertically or horizontally. When installed
vertically, the module needs to be rotated by 90 degrees, so as not to affect left and right viewing angle.
30.6mm 287.7mm
16.1mm
287.7mm
87
°
N
L
E
L N
L
L E
N
N
Packaging
1218.0mm
324.0mm
100mm
100mm
70mm
74mm
4mm
Product Installation
Various installation methods are available for this product: front installation, rear installation, floor installa-
tion, using sub-frame for fast installation, as well as wall-mounted installation.
Front Installation
Module Module
Remove the modules from left and right sides of the cabinet, use M6x60 bolt at the front mounting holes to
fix it to the steel structure. After it is fixed properly, connect power cord and signal lines, and then restore
the removed modules.
Rear Installation
Steel construction
40X40 square hollow bars
Use M8x60 bolts and connecting plates to fix onto the 40X40 square hollow bars.
Floor Installation
A floor support stand is required for floor installation, so that cabinets can be mounted onto the support
stand.
When installing, first fix 4 (2 to 4) cabinets onto the sub-frame, and then mount the sub-frame onto the steel
structure or wall, to achieve fast installation.
Note: Front or rear installation can also be used for sub-frame installation.
Wall-mounting Solution
Install cabinets onto the sub-frame or fixed structure, and then directly mount the sub-frame onto the wall,
to achieve wall-mounting installation.
Step 1:
Install cabinets onto the sub-frame and splice 2 to 4 cabinets. Number of cabinets is based on actual
requirements at installation site.
Sub-frame
Sub-frame
Step 2: Step 3:
Take a properly spliced cabinet, remove modules According to the installation positions marked on
from four corners, mark installation positions on the the wall, install M10 expansion screws.
wall according to the mounting holes on the
sub-frame.
Sub-frame Wall
M10 Expansion
screws
Module
Installation
hole
Mark
Step 4: Step 5:
Install the cabinet: Mount cabinets onto the wall After wiring is completed, insert modules back at
corresponding to the M10 expansion screw positions, the four empty corners. Repeat the same proce-
and then lock M10 nut (flat cushion + spring washers) dures to install the next spliced cabinet.
Product Wiring
Signal interfaces,
no difference for input and output
Take 2x4 cabinets for example; following are the instructions for power and signal cable connection method:
Total power for 8 cabinets with size 1152x288mm each is: 8x1.152x0.288x450w=1.2kw, arranged in 2x4
with 2 cabinet columns, and 4 cabinets for each column connected to power supply in series. In this case
use a 3X1.5m m2 power cable to connect from the distribution box or socket to the bottom of the cabinet.
The network cable is connected from up to down in "S" shape. Please calculate the resolution as per
288x72 pixels for each cabinet, and connect signal cables in accordance with the Signal Sending Card’s
load range. Please note that the load pixel range for each network interface is not more than 650,000
pixels.
Power Cable
Signal Cable
USB plug
Maintenance
Preparation Tools
Screwdriver
After completing the cabinet wiring, please use a multimeter to check if there is any short circuit at the AC
input power supply (L / N / PE) and DC output terminal (VCC / GND). If there is a short circuit, please
carefully investigate the wirings. Make sure all wirings are normal, and only then connect power to operate
the unit.
Shenzhen Absen Optoelectronic Co., Ltd. Absen American Inc. Absen GmbH
Absen Building, Huawei Industrial Park, Bantian, 7703, Kingspointe Parkway, Suite 600, Orlando, Eisenstrasse 5, 65428 Russelsheim (Frankfurt),
Longgang District, Shenzhen 518129, P.R.China FL 32819 Germany
T: +86-755-89747399 E: absen@absen.com T: +1-407-203-8870 E: stella.hsia@absen.com T: +49 (0) 6142 920 87 56 E: europe@absen.com
F: +86-755-89747599 W: www.absen.com F: +1-407-203-8873 W: www.absen.com F: +49 (0) 6142 920 87 57 W: www.absen.com