Professional Documents
Culture Documents
Cellphonedetectorppt 170331184420 PDF
Cellphonedetectorppt 170331184420 PDF
CIRCUIT DIAGRAM
WORKING PRINCIPLE
CONCLUSIONS
WHAT IS A CELL PHONE DETECTOR?
This handy cell phone detector can sense the
presence of an activated cell phone from a
distance of one and a-half meters.
LINE VEROBOARD :
Line Vero is used in this circuit.
CA3130 IC :
CMOS version gate-protected p-channel MOSFET.
Acts as an Differential Amplifier.
Used in the circuit as a Current to Voltage converter.
Provides very high input impedance , very low input
current and very high speed of performance.
1 kΩ RESISTOR:
Colour code sequence Brown, Black, Yellow, Gold.
Keeps the non-inverting input stable for
easy swing of the output to high state.
100 KΩ RESISTOR:
Colour code sequence Brown, Black, Yellow,
Gold.
Provides the discharge path for 0.22 µF
Capacitor.
0.22 µF CAPACITOR :
Ceramic capacitor type.
100 µF CAPACITOR :
Electrolytic Capacitor.
BC548 TRANSISTOR :
n-p-n type epitaxial silicon transistor.
9 V BATTERY :
Rectangular prism shape with round edges
and a polarized snap connector at the top.
This type is commonly used in walkie talkies,
clocks and smoke detectors.
BATTERY CLIP :
Necessary for holding the battery into place.
Keep in mind the polarity, while using a battery clip.
LED :
Light Emitting Diode with two lead
semiconductor light source.
It is a p-n junction diode, which emits
light when activated.
Though the device is handy, it has its own pros and cons just
Pros:
It can be used for detecting cell phones used for spying and
THANK YOU