Professional Documents
Culture Documents
Kamstrup 2G/4G
Network module
• Mobile network module for automatic reading
of MULTICAL® 603
• Uses existing mobile infrastructure for data
communication
• Plug and play solution - fixed hourly
transmission to READy Manager
• Large datagram transmitted every hour
24/7/365
• Exact time stamp on datagrams
• Built-in 30-day hour logger
• On-board SIM (eSIM)
• Eight (8) years of data collection included
• Possibility for extending the data collection
with up to 8 years
• Roaming agreements for 43 countries
• Two extra pulse inputs for connection of water
and electricity meters
• Dedicated external antenna for the mobile
infrastructure
Kamstrup 2G/4G Network module
Contents
General description/application 3
Technical data 3
Mechanical data 4
Markings and standards 4
Markets covered (as from January 2019) 4
Datagram – data content register 4
Installation 5
Ordering information 7
Accessories 7
General description/application
Technical data
Mechanical data
Dimensions (L x W x D) 90 x 35 x 14 mm
Weight, incl. module cover 37 g
Temperature range Like MULTICAL®
Installation
There are several ways to test if the module has connected to the 2G/4G mobile infrastructure and all the way to the READy
Manager
1. Forced Call
Press the front buttoms until ”CALL” is shown in the meters display.
This message will dissapear and the display will return to its normal state
Within 30 seconds, an ”OK” will be shown shortly in the lower left corner of the display – indicating that the READy Manager
has received data from the meter.
2. Checktest.kamstrup.com
It is also possible to test if the meter has been read via your mobilephone.
Enter: https://check.kamstrup.com/ and key-in the serialnumber of the meter.
The response is that the meter can be read by the READy Manager or several suggestions to troubleshooting is presented.
3. Display information
In order to test if the module status is OK and connected to the mobile infrastructure, the meter display can be used.
The module information can be found in the TECH-loop on the display.
• Module in module slot 1: Choose menu 2-101 in TECH-loop
• Module in module slot 2: Choose menu 2-202 in TECH-loop
Installation
Ordering information
Module HC-OO3-80
Module configuration XX - YY - ZZZ
Accessories
As external antenna, the 6699 448, Mini Triangle antenna with 2.5 m antenna cable and MCX
connector must be used.
If there is a need for more antenna cable, the solution below can prolong the installation with up to 25 meters of cable.
Recommended solution
+ + +
MULTICAL® 603 5000 292 5000 429: 5 m 6699 484
5000 441: 10 m
5000 442: 15 m
5000 443: 20 m
5000 444: 25 m
Kamstrup A/S
Industrivej 28, Stilling
DK-8660 Skanderborg
T: +45 89 93 10 00
F: +45 89 93 10 01
info@kamstrup.com
kamstrup.com