Professional Documents
Culture Documents
HCC/HCF4038B
. COMPLEMENTING APPLICATIONS
FULLY STATIC OPERATION...DC TO 10MHz
. SINGLE-PHASE CLOCKING
STANDARDIZED SYMMETRICAL OUTPUT EY F
. CHARACTERISTICS
QUIESCENT CURRENT SPECIFIED TO 20V
(Plastic Package) (Ceramic Package)
ORDER CODES :
TATIVE STANDARD N° 13A, ”STANDARD SPE- HCC40XXBF HCF40XXBM1
CIFICATIONS FOR DESCRIPTION OF ”B” HCF40XXBEY HCF40XXBC1
SERIES CMOS DEVICES”
PIN CONNECTIONS
DESCRIPTION
The HCC/4032B/4038B (extended temperature
range) and HCF4032B/4038B (intermediate tem-
perature range) are monolithic integrated circuits,
available in 16-lead dual in-line plastic or ceramic
package and plastic micro package.
The HCC/HCF4032B and HCC/HCF4038B types
consist of three serial adder circuits with common
CLOCK and CARRY-RESET inputs. Each adder
has two provisions for two serial DATA INPUT sig-
nals and an INVERT command signal. When the
command signal is a logical ”1”, the sum is com-
plemented. Data words enter the adder with the
least significant bit first ; the sign bit trails. The output
is the MOD 2 sum of the input bits plus the carry from
the previous bit position. The carry is only added at
the positive-going clock transition for the
HCC/HCF4032B or at the negative-going clock for
the HCC/HCF4038B, thus, for spike-free operation
the input data transitions should occur as soon as
possible after the triggering edge. The CARRY is
reset to a logical ”0” at the end of each word by ap-
plying a logical ”1” signal to a CARRY-RESET input
one-bit-position before the application of the first bit
of the next word.
FUNCTIONAL DIAGRAM
2/11
HCC/HCF4032B/4038B
4032B
3/11
HCC/HCF4032B/4038B
4038B
4/11
HCC/HCF4032B/4038B
5/11
HCC/HCF4032B/4038B
Typical Output Low (sink) Current. Minimum Output Low (sink) Current Charac-
teristics.
6/11
HCC/HCF4032B/4038B
Typical Output High (source) Current Charac- Minimum Output High (source) Current Charac-
teristics. teristics.
TEST CIRCUITS
Quiescent Device Current. Input Voltage.
Input Current.
7/11
HCC/HCF4032B/4038B
mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
a1 0.51 0.020
b 0.5 0.020
b1 0.25 0.010
D 20 0.787
E 8.5 0.335
e 2.54 0.100
e3 17.78 0.700
F 7.1 0.280
I 5.1 0.201
L 3.3 0.130
Z 1.27 0.050
P001C
8/11
HCC/HCF4032B/4038B
mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
A 20 0.787
B 7 0.276
D 3.3 0.130
E 0.38 0.015
e3 17.78 0.700
N 10.3 0.406
Q 5.08 0.200
P053D
9/11
HCC/HCF4032B/4038B
mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
d1 2.54 0.100
d2 0.56 0.022
e 1.27 0.050
e3 5.08 0.200
F 0.38 0.015
G 0.101 0.004
M 1.27 0.050
M1 1.14 0.045
P027A
10/11
HCC/HCF4032B/4038B
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No
license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned
in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied.
SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express
written approval of SGS-THOMSON Microelectonics.
11/11