You are on page 1of 12

Quick, Easy, Clean & Safe Fluid

Drain Valve

NITIN ENTERPRISES
S.No: 39/1, Manikbaug Industrial Estate,
Sinhagad Road, Vadgaon Budruk, Pune
411051
Mr. Nitin Sardesai, Partner
Mob: +91 9881231891
Email: nitin.v.sardesai@gmail.com
nitin@nitinenterprises.net.in

PATENT PENDING
Product Introduction
Our Fluid Drain Valve is used for quick, easy and eco-friendly replacement of any
industrial fluid - oil in diesel/petrol engines & lubrication tanks, coolant in radiators
or heat exchangers, fluid in air-conditioning systems.
This valve replaces the drain plug and washer fitted on the bottom of any tank or
sump eg: oil sump, oil tank or radiator.
This valve avoids damage to drain plug, fluid sump and washer.
Fast & user-friendly fluid replacement process.
Considerable savings in terms of labour, damaged material.
Waiting Time for equipment to cool down for fluid replacement:
◦ With Regular Valve – 20 mins to 1 hour.
◦ With our Fluid Drain Valve - < 5 mins.

PATENT PENDING
Typical Applications

Diesel /
Petrol
Engines
Industrial Construc-
Lubrication tion &
Systems Mining
Equipment
Drain
Valve
Air
Cooling
Compre-
Systems
ssors
A/C
Systems
Fluid Change Procedure

1. Fit appropriate threaded end of our fluid drain valve onto the sump or tank as applicable
2. During operation, fit the dust cap attached by chain onto the valve
3. The equipment is now ready for use
4. At the oil / fluid change interval, the dust cap is to be removed by hand & hose cap attached to the hose is to
be screwed in place of the dust cap by hand
5. Start hand tightening the hose cap & as the hose cap starts tightening, fluid starts draining. Take care to use
only manual force for tightening – use of any external tools is not required
6. The fluid thus drained can be collected in a suitable pan or container without spilling a drop of it on the
ground
7. After draining of fluid is completed, the hose assembly is to be removed & replaced with the dust cap
8. It is now safe to fill the equipment with new fluid from the top using the inlet provided
9. The equipment is ready for use
Existing Oil Change Procedure

It involves taking your


equipment to the nearest
service centre/garage
which leads to longer
equipment down time.
Oil Change Procedure with our Valve

Quick, clean &


environment-friendly
fluid change is done
without moving the
equipment in the
comfort of your own
premises
Product Advantages
EXISTING FLUID CHANGE NEW FLUID CHANGE
PROCEDURE PROCEDURE

Appropriate size spanner needs to be No spanner required – hand loosen dust


available for removal of the drain plug; if not cap & hand tighten hose cap , thus
available, there is a risk of plug damage eliminating the risk of damage to any
components
Product Advantages
NEW FLUID CHANGE
EXISTING FLUID CHANGE
PROCEDURE
PROCEDURE

Copper sealing washer needs replacement if Dowty washer once installed does not need
damaged. replacement ever.
Product Advantages
NEW FLUID CHANGE
EXISTING FLUID CHANGE PROCEDURE
PROCEDURE

Big risk of permanent oil sump damage due No risk of oil sump thread damage
to repeated drain plug removal & improper
replacement.
Product Advantages
NEW FLUIID CHANGE
EXISTING FLUID CHANGE PROCEDURE
PROCEDURE

Risk of burn injuries during hot oil No risk of burn injuries even during
drain. hot oil drain
Why Choose our Fluid Drain Valve

• Clean & Environment Friendly Fluid Change is now possible


without moving the equipment.
• Technical or Not, you can do it too.
• Plug, Turn, Tighten & Drain, its that easy with the help of
our Fluid Drain Valve.
• You don’t need to stock up on any washers as ours will last
till the equipment does. (Guaranteed)
• With our house attachment, you are saved from handling
any hot fluids (which could cause potential injuries).
• They come in various sizes to suit your requirement. PATENT PENDING
Team,
NITIN ENTERPRISES

Thank You for


your time &
interest
PATENT PENDING

You might also like