Professional Documents
Culture Documents
Madas
CONNECTED
PARTICLES
Created by T. Madas
Created by T. Madas
Question 1 (**)
A B
Two particles A and B of respective masses 5 kg and 9 kg are each attached to the
two ends of a light inextensible string which passes over a smooth pulley P .
The two particles are both held at rest, 1.75 m above a horizontal floor with the
portions of the strings, not in contact with the pulley, vertical.
a) Calculate the tension in the string, for the period before B reaches the floor.
MMS-K , T = 64 N , v ≈ 2.84 ms −1
Created by T. Madas
Created by T. Madas
Question 2 (**+)
A B
F
4 kg 6 kg 30 N
Two collinear forces, of magnitudes F N and 30 N , act on each of the blocks, and in
opposite directions, as shown in the figure above.
Determine the possible values of F , and in each case the corresponding value of the
tension in the string.
MMS-R , F = 10 N, T = 18 N , F = 50 N, T = 42 N
Created by T. Madas
Created by T. Madas
Question 3 (***)
A B
Two particles A and B of respective masses 3 kg and m kg are each attached to the
two ends of a light inextensible string which passes over a smooth pulley P . The two
particles are held at rest, both at a height of 1.28 m above a horizontal floor with the
portions of the strings not in contact with the pulley vertical.
The system of the two particles is then released from rest with B accelerating towards
the floor at 1.96 ms −2 , while A never reaches P .
a) For the period before B reaches the floor, calculate the tension in the string.
[solution overleaf]
Created by T. Madas
Created by T. Madas
Created by T. Madas
Created by T. Madas
Question 4 (***)
A
B
2 kg 5 kg
30°
Particle A is placed at rest on the incline plane while B is hanging freely at the end
of the incline plane vertically below P , as shown in the figure above. The two
particles, the pulley and the string lie in a vertical plane parallel to the line of greatest
slope of the incline plane.
The particles are released from rest with the string taut. Particle A begins to move up
the incline plane, where the coefficient between A and the plane is 1 3 .
2
Ignoring air resistance, calculate the tension in the string immediately after the
particles are released.
MMS-G , T = 31.5 N
Created by T. Madas
Created by T. Madas
Question 5 (***)
θ P
The coefficient of friction between the box and the plane is 0.6 .
The string lies along the plane and passes over a small smooth pulley P which is
fixed at the bottom end of the plane.
A is hanging vertically below the end of the plane. The string lies in the vertical
plane which contains the pulley and a line of greatest slope of the inclined plane, as
shown in the figure above. B is released from rest with the string taut.
After release, determine the acceleration of the system and the tension in the string.
Created by T. Madas
Created by T. Madas
Question 6 (***)
A car of mass 1500 kg is towing a trailer of mass 1000 kg by means of a light
inextensible rope. The car is experiencing a constant air resistance of 200 N , while
the corresponding constant air resistance on the trailer is 300 N .
The car and trailer are modelled as particles, with the tow rope remaining taut and
horizontal throughout the motion.
a) Given that the driving force acting on the car is 750 N , determine …
Later in the journey, the car and the trailer are ascending on a road which inclined at
5° to the horizontal. The air resistance on the car and trailer are unchanged.
b) Assuming that the system now moves with constant speed, calculate …
Created by T. Madas
Created by T. Madas
Question 7 (***)
A car of mass 1500 kg is towing a trailer of mass 500 kg by means of a light rigid
horizontal towbar. The car is experiencing a constant air resistance of 300 N , while
the corresponding constant air resistance on the trailer is 100 N .
Later in the journey, the car’s driving force is removed and the car’s brakes are
applied, providing a constant breaking force of 400 N , on the car only.
b) Determine …
Created by T. Madas
Created by T. Madas
Question 8 (***)
recovery truck
car
A recovery truck of mass 2800 kg is towing a car of mass 1200 kg along a straight
horizontal road. The tow cable is inclined at an angle θ to the horizontal, where
cos θ = 0.75 , as shown in the figure above. The tow cable is modelled a light
inextensible string and the two vehicles as particles.
The two vehicles were travelling at constant speed 12 ms −1 with the tow cable taut as
they were travelling in an urban area. On leaving this urban area, the truck begins to
accelerate uniformly bringing their speed to 27 ms −1 over a distance of 2.34 km .
There is a constant resistance to the motion of the truck of 600 N , and a constant
resistance to the motion of the car of 270 N .
b) For the part of the journey during which the two vehicles accelerate,
determine …
Created by T. Madas
Created by T. Madas
Question 9 (***+)
Car
1500 kg
Trailer
600 kg
A constant resistance of magnitude 400 N acts on the car, and a constant resistance
of magnitude 300 N acts on the trailer. The engine of the car produces a constant
forward driving force of 8400 N .
Determine the acceleration of the car and the tension in the tow bar.
a ≈ 0.923 ms −2 , T = 2500 N
Created by T. Madas
Created by T. Madas
Question 10 (***+)
A B
Two particles A and B of respective masses 2 kg and 5 kg are attached to the ends
of a light inextensible string which passes over a smooth pulley P . The two particles
are held at rest, at the same level above a horizontal floor with the portions of the
strings not in contact with the pulley vertical. The system is then released from rest.
Eventually B reaches the floor 0.5 s after release and does not rebound. In the
ensuing motion A does not reach P .
Created by T. Madas
Created by T. Madas
Question 11 (***+)
P B
Two particles A and B have masses 0.5 kg and 0.2 kg , respectively. The particles
are attached to the ends of a light inextensible string. Particle B is held at rest on a
rough horizontal table. The string lies along the table and passes over a small smooth
pulley P which is fixed to the edge of the table. Particle A is at rest on a smooth
plane which is inclined to the horizontal at an angle α , where tan α = 0.75 . The
string lies in the vertical plane which contains the pulley and a line of greatest slope of
the inclined plane, as shown in the figure above.
During the first 1.5 s of the motion B does not reach the pulley and A moves
2.25 m down the plane.
a) Find the tension in the string during the first 1.5 s of the motion.
Created by T. Madas
Created by T. Madas
Question 12 (***+)
In a fun fair ride, a miniature electric train for small children consists of an engine
with two carriages. The engine has mass 500 kg towing a larger carriage of mass
300 kg , which in turn tows a smaller carriage of mass 200 kg . The above masses
include the driver and the children.
The engine and the carriages are modelled as particles and the couplings between the
engine and the carriages are modelled as light rigid rods. When in motion, the engine
and each of the carriages experiences a constant resistance of 100 N .
b) … the tension in the coupling between the engine and the first carriage when
the train has maximum acceleration.
c) … the tension in the coupling between the first carriage and the second
carriage when the train has maximum acceleration.
Created by T. Madas
Created by T. Madas
Question 13 (***+)
30° P
B is held at rest on a rough plane inclined at 30° to the horizontal. The string lies
along the plane and passes over a small smooth pulley P which is fixed at the bottom
end of the plane. The coefficient of friction between the box and the plane is 0.8 .
A is hanging vertically below the end of the plane. The string lies in the vertical
plane which contains the pulley and a line of greatest slope of the inclined plane, as
shown in the figure above.
b) Calculate the magnitude and direction of force exerted on the pulley by the
string immediately after B is released.
Created by T. Madas
Created by T. Madas
Question 14 (***+)
A car of mass 1400 kg is towing a caravan of mass 600 kg by means of a light rigid
horizontal towbar. The car is experiencing a constant air resistance of 200 N , while
the corresponding constant air resistance on the trailer is 300 N .
Later in the journey, the car descends a hill which is declined at 10° to the horizontal.
For this part of the journey the car’s driving force is removed and the brakes are
applied, providing a constant breaking force of B N , on the car only. The air
resistance on the car and caravan are unchanged.
i. … the value of B .
Created by T. Madas
Created by T. Madas
Question 15 (***+)
C
Pulley Pulley
A B
Each of the strings passes over two smooth pulleys, each of the pulleys located at the
edge of the table, with A and B hanging freely at each of the two ends of the table,
as shown in the figure above.
The system is released from rest with the strings taut.
By modelling the three blocks as particles, determine in any order the acceleration of
the system and the tension in each of the two strings.
Created by T. Madas
Created by T. Madas
Question 16 (***+)
Two particles A and B have masses m kg and 4 kg , respectively.
The two particles are connected by a light inextensible string which passes over a
smooth light fixed pulley. The two particles are held at rest with the string taut and the
hanging parts of the string vertical.
8mg
b) Show that the tension in the string, while A ascends, is .
m+4
At the instant when A is 0.7 m above its original position, it has not yet reached the
pulley and is travelling at 1.4 ms −1 .
4−m
MMS-A , a = g , m=3
4+m
Created by T. Madas
Created by T. Madas
Question 17 (****)
B A
Two particles A and B of respective masses 5 kg and 2 kg are each attached to the
two ends of a light inextensible string which passes over a smooth pulley P . The two
particles are both held at rest, 1.54 m above a horizontal floor with the portions of the
strings, not in contact with the pulley, vertical. The system is then released from rest.
When in motion, each particle is subject to a constant air resistance of 7 N .
b) Calculate the tension in the string, for the period before A reaches the floor.
Created by T. Madas
Created by T. Madas
Question 18 (****)
A
B
3 kg 4 kg
Particle A is placed at rest on the incline plane while B is hanging freely at the end
of the incline plane vertically below P , as shown in the figure above.
The two particles, the pulley and the string lie in a vertical plane parallel to the line of
greatest slope of the incline plane.
The particles are released from rest with the string taut.
Particle A begins to move up the incline plane, where the constant ground friction
between A and the plane has magnitude 10.5 N .
a) ... the acceleration of the system immediately after the particles are released.
b) ... the magnitude and direction of the force exerted by the string on P .
2 s after release, while both particles are moving, the string breaks.
c) Calculate the total distance A moves up the plane from the instant since the
particles were released, assuming that A does not reach the pulley.
[solution overleaf]
Created by T. Madas
Created by T. Madas
Created by T. Madas
Created by T. Madas
Question 19 (****)
A B
Two particles A and B of respective masses 0.5 kg and 0.9 kg are attached to the
ends of a light inextensible string which passes over a smooth pulley P . The two
particles are held at rest, at the same level, 1.4 m above a horizontal floor. The
portions of the strings not in contact with the pulley are vertical. The system is then
released from rest and the particles begin to move without air resistance.
The string suddenly breaks 0.5 s after the particles were released.
b) Assuming A does not meet any obstacles in its consequent motion, calculate
the additional time it takes A until it reaches the floor.
( )
a = 2.8 ms −2 , T = 6.3 N , t = 1 2 + 74 ≈ 0.757 s
2
Created by T. Madas
Created by T. Madas
Question 20 (****)
Two particles A and B of respective masses 3 kg and m kg are connected by a light
inextensible string which passes over a smooth pulley P .
The two particles are held at rest, at the same level above a horizontal floor, with the
portions of the strings not in contact with the pulley vertical.
a) Find the tension in the string for the period before B reaches the ground.
The particle B hits the ground 6 s after release and does not rebound.
7
c) Determine the greatest height of A above the ground in the subsequent motion.
Created by T. Madas
Created by T. Madas
Question 21 (****)
B P
The system is released from rest with the string taut, so that the distance BP is 4 m .
On release, the motion of B takes place over a smooth section of the roof.
After B has moved for 2.5 m the roof becomes rough and the coefficient of friction
between B and the roof is 0.75 .
MMS-M , v ≈ 4.26 ms −1
Created by T. Madas
Created by T. Madas
Question 22 (****)
A train consists of a locomotive of mass 40000 kg , pulling 20 identical carriages of
mass 10000 kg each. When in motion the locomotive experiences a resistance of
4 R N while each carriage experiences a resistance of R N .
When the driving force of the locomotive is 51000 N the trains accelerates uniformly
reaching its maximum speed of 40 ms −1 from rest, over a distance of 16 km .
b) While the train is accelerating, calculate the tension in the couplings between
Created by T. Madas
Created by T. Madas
Question 23 (****)
B P
The string, A , P and B lie in a vertical plane at right angles to the end of the roof.
a) Given that the coefficient of friction between B and the roof is 0.2 , find in
any order…
Created by T. Madas
Created by T. Madas
Question 24 (****)
A light rigid rod AB , where A is vertically above B , has a particle of mass 0.2 kg
attached to it at A and a particle of mass 0.3 kg attached to it at B .
MMS-E , T = 2.4 N
Created by T. Madas
Created by T. Madas
Question 25 (****+)
A P
Two particles A and B have masses 2 kg and 3 kg , respectively. The particles are
attached to the ends of a light inextensible string. Particle A is held at rest on a rough
horizontal table. The coefficient of friction between the particle A and the table is 1 .
7
The string lies along the table and passes over a small smooth pulley P which is fixed
to the edge of the table. Particle B is at rest on a rough plane which is inclined to the
horizontal at an angle θ , where tan θ = 0.75 .
The coefficient of friction between the particle B and the plane is also 1 .
7
b) Given that B never reaches P , determine the total distance that B travels up
the plane.
Created by T. Madas
Created by T. Madas
Question 26 (****+)
A
B
4.5 kg 0.4 kg
Two particles A and B , of mass 4.5 kg and 0.4 kg respectively, are attached to
each of the ends of a light inextensible string. The string passes over a smooth pulley
P , at the top of a fixed rough plane, inclined at θ to the horizontal, where
tan θ = 0.75 . Particle A is placed at rest on the incline plane while B is hanging
freely at the end of the incline plane vertically below P , as shown in the figure above.
The two particles, the pulley and the string lie in a vertical plane parallel to the line of
greatest slope of the incline plane. The particles are released from rest with the string
taut. Particle A begins to move down plane.
Given that the coefficient of friction between A and the plane is 0.5 , determine the
force exerted by the string on the pulley while the system is in motion.
Only the motion before A reaches the end of the plane and before B reaches P is to
be considered.
F ≈ 7.73 N
Created by T. Madas
Created by T. Madas
Question 27 (****+)
Two particles A and B of respective masses m kg and 1 kg are attached to the ends
of a light inextensible string which passes over a smooth pulley P . The particle B is
attached to a third particle C of mass 9 kg by another light inextensible string. The
three particles are held at rest, with A in contact with a horizontal floor, and the
portions of the strings not in contact with the pulley vertical. The system is released
from rest and C begins to accelerate towards the floor with the tension in the string
BC being 50.4 N .
C reaches the floor 1.5 s after release and does not rebound. In the ensuing motion
A does not reach P and B does not reach the floor.
Created by T. Madas
Created by T. Madas
Question 28 (*****)
Two particles A and B have masses 4 kg and 1 kg , respectively.
A small, smooth light fixed pulley P , is located 1.6 m above a horizontal floor.
The two particles are connected by a light inextensible string, of length L m , which
passes over P .
The particles are held at rest, with B level with the floor and A hanging above the
floor, with the string taut and the hanging parts of the string vertical.
The system is released from rest and A hits the floor, from which it does not rebound.
MMS-S , L = 2.2
Created by T. Madas
Created by T. Madas
Question 29 (*****)
P
B
A 30° 30°
Q
R
Two particles A and B have masses 2 kg and 5 kg , respectively. The particles are
attached to the ends of a light inextensible string. The string passes over a small
smooth pulley P which is fixed at the top of the cross section of a triangular prism
RPQ , where PRQ = PQR = 30° . The string lies in the vertical plane which
contains the pulley and lines of greatest slope of the inclined planes, PR and PQ , as
shown in the figure above. When A is held at R with the string taut, B is at P , on
the line of greatest slope PQ .
The lines of greatest slope of the inclined planes, PR and PM , are smooth but the
line of greatest slope MQ is rough.
The system is released from rest with the string taut, when A is at R and B is at P ,
on the line of greatest slope PQ . The system initially accelerates but due to the rough
section MQ , B comes to rest as it reaches Q .
Assuming that the string remains taut throughout the motion, show that the coefficient
of friction between the B and MQ is k 3 , where k is a constant to be found.
MMS-Z , k = 4
15
Created by T. Madas
Created by T. Madas
Question 30 (*****)
Pulley
7 kg A
P B
1 kg 8 kg
B is hanging freely at the end of the incline plane vertically below the pulley, as
shown in the figure above. The two particles, the plate, the pulley and the string lie in
a vertical plane parallel to the line of greatest slope of the incline plane.
When the system is released from rest with the string taut, B begins accelerate
downwards at 2 ms −2 .
MMS-T , d ≈ 3.69 m
Created by T. Madas