Professional Documents
Culture Documents
BILL OF QUANTITIES
TOTAL - A ( - )
( - )
( 4.00)
Providing & injecting chemical emulsion for
Pre-constructional anti-termite treatment by
supplying & spraying chemicals as per IS
6313-1981 and in accordance with
manufacturer's specifications with all lead &
lift for all materials, creating a chemical barrier
under and alround the column pits, wall
trenches, basement excavations, top surface of
plinth filling, junction of wall & floor, along
the external perimeter of the building,
expansion joints, surroundings of pipes &
conduits etc., complete and as directed. Sft 1750 -
( 1.00)
Providing & laying Plain cement concrete of
mix 1:4:8 (1 cement: 4 cleaned & approved
sand: 8 graded stone aggregate 40mm nominal
size) in foundations of walls & columns etc.,
including consolidation, necessary formwork,
curing etc., complete with all lead & lift for all
materials & labour and as directed. Cft 500 -
( 2.00)
Providing & laying Plain cement concrete of
mix 1:4:8 (1 cement: 4 cleaned & approved
sand: 8 graded stone aggregate 40mm nominal
size) for below floors etc., including
consolidation, necessary formwork, curing etc.,
complete with all lead & lift for all materials &
labour and as directed. Cft 600 -
( 3.00)
Providing & laying Plain cement concrete of
mix 1:3:6 (1 cement: 3 cleaned & approved
sand: 6 graded stone aggregate 20mm nominal
size) for plinth course, sills, bedblocks and for
any other such works including necessary
formwork, consolidation, curing etc., complete
with all lead & lift for all materials & labour
and as directed, at all levels & locations. Cft 150 -
( 4.00)
Providing & laying Plain cement concrete of
mix 1:2:4 (1 cement: 3 cleaned & approved
sand: 6 graded stone aggregate 20mm nominal
size) for sunken portions, below flooring or
any other locations etc., as screed/ levelling
course to an average thickness of 40mm
including necessary formwork, consolidation,
curing etc., complete with all lead & lift for all
materials & labour and as directed.
First floor Sft 200 -
( 5.00)
Providing & laying Plain cement concrete of
mix 1:3:6 (1 cement: 3 cleaned & approved
sand: 6 graded stone aggregate 20mm nominal
size) in plinth protection/ pavings all around
building to an average thickness of about
75mm over a sub-base of well compacted earth
including compaction, finishing the exposed
surfaces in CM 1:4 (1 cement: 4 fine sand),
15mm thick & with a floating coat of neat
cement, with necessary formwork,
consolidation, curing etc., complete with all
lead & lift for all materials & labour and as
directed, at all levels & locations. Sft 300 -
plinth beam
Roof beams of all shapes & sizes
Cft 230 -
Ground floor Cft 330 -
First floor Cft 330 -
Second floor Cft 330 -
( 1.00)
PART D - REINFORCEMENT
( 1.00)
PART E - MASONRY
( 2.00)
Providing & constructing 8" Thick Solid
Cement Block masonry walls in CM 1:6 (1
cement: 6 sieved & approved sand) using
blocks of approved quality and class in super-
structure including necessary scaffolding,
raking of joints, finishing, curing etc. complete
with all lead & lift for all materials & labour
and as directed, at all heights & locations.
Ground floor Sft 1750 -
First floor Sft 1750 -
Second Floor Sft 1750 -
( 3.00)
Providing & constructing 4" thick Solid
Cement block masonry walls in CM 1:6 (1
cement: 6 sieved & approved sand) using
blocks of approved quality and class in super-
structure including necessary scaffolding,
raking of joints, finishing, curing etc. complete
with all lead & lift for all materials & labour
and as directed, at all heights & locations. Sft 300 -
( 3.00)
( 3.00)
Providing & painting with two coats of first
quality paint of approved brand and colour to
External plastered surfaces (ceiling & walls)
over a coat of approved primer either of
cement based or distemper based primer
including preparation of surfaces subsequent
application of paint and making good all open
joints and minor defects/ blemishes of every
kind after application of priming coat, all as
per specifications and directions with all lead
& lift for all materials & labour and as
directed. (Apex make) 4500 -
Total of Part G - Painting -
PART H - FLOORING
1.00 Providing & Laying Kota stone Flooring
flooring of approved sample, laid in CM 1:3, 30 to
50mm thick, with a thin coat of cement slurry on a
prepared bed/ floor slabs & finishing the joints
with matching coloured cement, includung
Polishing, waxing, curing etc., complete [basic rateSft /-] 4700 -