Professional Documents
Culture Documents
fill,
Standard Specification for
Pipe, Sleel, Black and Hot-Dipped , Zinc-Coated, Welded and
Seamlessl
This standard is issued under the fixed designation A 53; the number immediately following the designation indicates the yer of original
adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript
epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense. Consult the DoD Index of Specifications and
Standards for the specific year of issue which has been adopted by the Department of Defense-
3
Annual Book ofASTM Standards,Yol0l.06.
r
This specification is under the juisdiction of ASTM Committee A-1 on Steel, a
Annual Book ofASTM Standards, Vol 01.01.
Stainless Steel, and Related Alloysand is the direct responsibility of Subcommittee s
Annual Book of ASTM Standards, Vol 01.03.
6
-\01.09on Steel Pipe. Annual Book of ASTM Standards, Vol 01.05.
Current edition approved March 10, 1996. Published May 1996. Originally 7
Annual Book of ASTM Standards, Vol 02.04.
pubiished as A 53 15. Last previous edition A 53 - 95a. 8
Annual Book ofASTM Standards, Vol 14.02.
2
For ASME Boiler and Pressure Vessel Code applications, see related Specifi- e
Annual Book ofASTM Standards, Vol 03.05.
cation SA-53 in Section II of that code. 10
Annual Book of ASTM Standards, Vol 03.03