Professional Documents
Culture Documents
MASTECO
VALVE
ALARM VALVE 특허품
Specification 특 허품
Operation
Alarm valve primary and secondary side of the state,
Model No. M-WAV65-N M-WAV80-N M-WAV100-N
filled with water, fire, the clapper is activated, leading
Size 65A 80A 100A to the flow direction of the alarm switch on delay circuit
after the set time has elapsed, the alarm sends an
Test Pressure 2.1MPa(21kgf/㎠)
electrical signal to the cry of the Control Panel draw.
Alarm Valve of The MASTECO Max. Working
1.4MPa(14kgf/㎠)
Pressure
Our alarm valve is used for wet sprinkler system. our alarm valve directly by sensing the movement of the flow when Before Operation After Operation
F l a n g e
the sprinkler is in operation it is possible to detect the exact conventional way of pressurized alarm type alarm valve Specification
KS B 1511 FF 10K
2nd Side 2nd Side
will break away one. And, alarm valve is a built-in delay timer, water hammer occurs during operation of the pump
Direction of
Vertical
in response to the problems on the false. In addition, a built-in drain valve on site glass if applicable that can easily Connection
be installed in a small space is a multi-functional product. 재 질 Ductile Iron, Brass, NBR, EPDM
특 허품
Features 중 량 12kg 13kg 17kg
1nd Side 1nd Side
형 식 번 호 검13-6-1 검13-7 검13-8 Water way Water way
ø B
ø B
ø
ø
H
H
POINT 2 The monitor is accurate and fast!
- Clapper is directly sense the flow of running water
MASTECO
øC F øA øC F øA
D
25A
- Built-in delay timer
L
E
E
POINT 4 Enhanced safety!
J
I
D
M I
M
K
- Body and cover material is applied to GCD450 øC G
øA K øA
øC G
특Option
허품
NO Part Name Q;ty
① Body 1
② Alarm Switch 1
③ Drain Valve 1
④ Nipple 2
MASTECO MASTECO MASTECO ⑤ Niddle Valve 2
⑥ Pressure Gauge 2
⑦ Drain Valve (Sight Glass) 1
[STANDARDS] [SIGHT GLASS TYPE]
POINT 2 User-Friendly
As a multi-functional valve that can be operated by the fire detection of electronic ball valve and by
PRE-ACTION VALVE
OPE RATION manual control in case of an emergency, it is very convenient for the maintenance by integrating an
operation part for the opening of main valve at one place
When a fire breaks out an electronic ball valve that is linked to a sensor is
opened and water is drained to the drain pipe. And then valve is opened and a POINT 3 Prevention of Freezing and Complete Drainage
fire alarm is activated by the operation of 2nd side pressure gauge and an
extinguishant water is rapidl y discharged to a fire at 2nd side(or Test Drained water by the operation of electronic ball valve is drained to the drain pipe. And the automatic
drainage pipe) . drain device equipped to the drain valve can thoroughly discharge the remaining water of 2nd side to
the drain pipe. This advantage makes the floor of valve room kept clean and prevents freezing.
(Left)
Specification
Model No. M-PAV80 M-PAV100 M-PAV125 M-PAV150
Size 80A 100A 125A 150A
Pre-Action Valve
DIME N SION
Test Pressure 21 kgf/cm 2
(2.1 MPa)
(Right) Max.Working Pressure 14 kgf/cm 2
(1.4 MPa) No. A B C D E F
Flange Specification KSB 1511 FF 10K M-PAV80 27 20 220 245 160 45
Direction of Connection Vertical M-PAV100 320 210 270 270 160 45
Electric Ball Valve DC24V / Both A utomatic and Manual M-PAV125 350 215 310 310 17 60
Net Weight (Kg) 36 51 67 84 M-PAV150 370 245 345 345 185 60
CHECK VALVE Model : MGCV
DND - 0004 CHECK VALVE
Model : MGCV (2", 2.5", 3", 4", 5")
Description
Global Leader
Towards
in Fire Fighting Equipment
Masteco Industry Co., Ltd. formerly known as Korea Halon was founded in 1984. Since then, the company has been
providing fire protection solutions to a wide array of customers through its innovative and state-of-the-art water and
gaseous-based fire extinguishing product lines. With extensive experience in the development and manufacturing
of such products, Masteco Industry Co., Ltd. has established itself in the Korean market as the leading and trusted
partner in fire protection. As the company extends its market globally, Masteco Industry Co., Ltd. continues to
endeavor for high-quality products that comply with if not exceed the applicable strictest international standards.
REPORT
On
CHECK VALVES
(HMER, HMER7)
for
DESCRIPTION
PRODUCT COVERED:
CONSTRUCTION DETAILS:
The devices have been examined and found to comply with the applicable
requirements of the Standard for Check Valves for Fire Protection Service, UL
312 and the Canadian Requirements for Check Valves, in effect as of the date
of this Report.
USE:
The products covered by this Report are intended for use in accordance with
the National Fire Protection Association Standards for Low Expansion Foam,
NFPA 11, the Installation of Sprinkler Systems, NFPA 13, the Installation of
Standpipe, Private Hydrants, and Hose Systems, NFPA 14, Water Spray Fixed
Systems, NFPA 15, the Installation of Stationary Pumps, NFPA 20, Water Tanks
for Private Fire Protection, NFPA 22 and the Installation of Private Fire
Service Mains and Their Appurtenances, NFPA 24.