Professional Documents
Culture Documents
________________________________________________________________________________
The Vilter high pressure heat pump compressors retain the single screw’s inherent
design advantages of balanced forces for long life and high reliability, and parallel
slides for peak performance at full or part load…performance and reliability superior
to any twin screw compressor.
Features:
• Vilter Single Screw Compressor with pressure ratings up to 950 psig MAWP.
• Differential pressures up to 600 psid.
• Vilter Parallex™ slide system to optimize compression efficiency (Capacity and Volume Ratio
continuously and independently variable from 10% to 100% and 1.2 to 7.0 respectively).
• High COP, even at part load conditions.
• Environmentally friendly ammonia (R-717) refrigerant.
• Suitable for use with fixed or variable speed drives up to 4800 rpm.
Benefits:
• Energy efficient compression.
• Recover waste heat energy from refrigeration systems to efficiently produce hot water.
• Potential to eliminate or reduce dependency upon boilers for hot water.
• Can be seamlessly added to any existing ammonia refrigeration system.
Applications:
Beverage
Dairy
Seafood
Process
District Heating
Single Screw Heat Pump Compressors
The higher operating pressures associated with ammonia heat pump applications, for condensing
temperatures up to 195°F, to produce high grade hot water temperatures up to 185°F, dictate that the
compressor casing is constructed of cast steel. High differential pressures are achieved with minimal
modifications to the main rotor and gate rotors, and without the need for expensive thrust load balancing
systems.
Standard cast iron Single Screw compressor models VSS-291, VSS-341, VSS-451 and VSS-601 are limited
to applications with condensing temperatures up to 160°F.
Units may be pre-assembled on compact, maintenance friendly skids, pre-wired, thermally insulated,
Ammonia Heat Pump Technical Specifications
complete with starters and controls. Individually customized solutions are available upon request.
Vilter reserves the right to make changes in design and specifications without notice.
Copyright Vilter Manufacturing LLC 2009. Bulletin No.0109. Printed in U.S.A.