Professional Documents
Culture Documents
The S-Max Pro impresses with its speed, reliability and precision. It is available as a stand-alone
solution but is also scalable and can be connected by a network, that creates a fully automated pro-
duction line, to realize the industrial serial production in 3D sand printing.
TECHNICAL SPECIFICATIONS
External Dimen- 10400 x 3520 x 2860 mm
Binder System Furan CHP HHP Inorganic
sions (L x W x H) (409.5 x 138.6 x 112.6 in.)
Build Box* 1800 x 1000 x 700 mm up to 125 up to 70 up to 40 up to 80
Max Build Rate**
(L x W x H) (70.9 x 39.4 x 27.6 in.) l/h l/h l/h l/h
0.26 - 0.38 mm
Layer Height Exhaust Air 300 m³/h 600 m³/h 600 m³/h 300 m³/h
(0.01 - 0.015 in.)
8600 kg * with box-in-box system 400 mm height
Weight ** depending on jobbox utilization, sand type, layer height, resolution & environmental conditions
(18960 lbs)
400 V AC (±10%)
Supply Voltage
3ph/PE/N SYSTEM OPTIONS
• With two standard jobboxes or one box-in-box jobbox available
SYSTEM BENEFITS • With desanding station available (for standard jobbox)
ExOne disclaims all warranties and liabilities for the content hereof and makes no representations as to its accuracy or fitness for use for any purpose. Any tradenames, trademarks, or service marks of others appearing
herein are used strictly nominatively and are not to be construed as implying any affiliation connection, association, sponsorship, or approval of the owners thereof for ExOne, its products, or the content hereof.
006_EN_2020-06_Data Sheet_S-Max Pro