Professional Documents
Culture Documents
LK 2. BATTERY INSPECTION
Safety Inspection
Description Available** Not Availble**
Fender Cover*
Seat Cover*
Floor Mate*
Steering Cover*
Chooker/Ganjal (Front and Rear Tyre)*
Wearpack*
Safety Shoes*
Safety Glass*
Safety Glooves*
Masker*
* All Personal Protective Equipment/PPE must be worn during practice in the workshop (photo)
** Give a Check Mark (Tick “√”) in the column where relevant, specify your real condition.
Preparation
Description Good** Bad**
Visual Check engine cleanless*
Visual Check Wiring harness condition & repaired*
Check Engine Oil Level & Condition*
Check Engine Cooling*
Check Battery Condition*
Workshop Manual
Tools Set
Battery Tester
Baterry Load Tester
*Make sure the item must be corrected until all item in good condition.
** Give a Check Mark (Tick “√”) in the column where relevant, specify your real condition.
I. Observation
1
BBPP MPV BMTI/Automotive Reskilling & Upskilling 2020
A. Visual Check up
- Physical of battery Good/Bad
- Pole of Battery Good/Bad
- Electrolyte Normal/Bad
B. Battery Perform
1. Load the battery on AH in 5 ........................ AH (CCA)
second
- Voltage ................................ Volt
- Condition of Electrolyte Good/Bad
2. Analyze condition of Battery Using a Battery analyzer,
describe state of Health
Battery
Note: Each activity must be completed by picture/photo
……………………….., ……………………………… 2020
Trainee,
……………………………………………….
2
BBPP MPV BMTI/Automotive Reskilling & Upskilling 2020
1. Safety Device
2. Battery Tester
3. Baterry Load Tester
4.