Professional Documents
Culture Documents
LK 2. BATTERY INSPECTION
Safety Inspection
Description Available** Not Availble**
Fender Cover* V
Seat Cover* V
Floor Mate* V
Steering Cover* V
Chooker/Ganjal (Front and Rear Tyre)* V
Wearpack* V
Safety Shoes* V
Safety Glass* V
Safety Glooves* V
Masker* V
* All Personal Protective Equipment/PPE must be worn during practice in the workshop (photo)
** Give a Check Mark (Tick “√”) in the column where relevant, specify your real condition.
Preparation
Description Good** Bad**
Visual Check engine cleanless* V
Visual Check Wiring harness condition & repaired* V
Check Engine Oil Level & Condition* V
Check Engine Cooling* V
Check Battery Condition* V
Workshop Manual V
Tools Set V
Battery Tester V
Baterry Load Tester v
*Make sure the item must be corrected until all item in good condition.
** Give a Check Mark (Tick “√”) in the column where relevant, specify your real condition.
I. Observation
1
BBPP MPV BMTI/Automotive Reskilling & Upskilling 2020
A. Visual Check up
- Physical of battery Good/Bad
- Pole of Battery Good/Bad
- Electrolyte Normal/Bad
B. Battery Perform
1. Load the battery on AH in 5 ............110..... AH (CCA)
second
- Voltage ...............6............... Volt
- Condition of Electrolyte Good/Bad
2. Analyze condition of Battery Using a Battery analyzer,
describe state of Health
Battery
Note: Each activity must be completed by picture/photo
Cimahi, 21 November2020
Trainee,
2
BBPP MPV BMTI/Automotive Reskilling & Upskilling 2020
3
BBPP MPV BMTI/Automotive Reskilling & Upskilling 2020