Professional Documents
Culture Documents
20-Aug-2020
Development Plan
SYED BILAL AHMED
Content
3. DCS, PLC
1. Process & Instrumentation Diagram
For Process
Read K08-02
For Power
I&C power read the K103
For Load Sheet
Read K404
2. Boiler & Turbine Master Control System
Introduction
The Mark* VIe control system is a flexible platform used in multiple
applications. Its architecture enables unique engineered solutions for
a variety of large industrial applications. It features high-speed,
networked input/output (I/O) for Simplex, Dual, and Triple Modular
Redundant (TMR) systems.
The Mark VIeS Safety controller and I/O can operate independently
or integrated with the rest of the Mark VIe controllers for safety-
critical applications that conform to IEC® 61508
The Mark VIe and Mark VIeS control systems are used in a wide
range of process control and protection applications, including
steam, gas, and wind turbines, power generation balance of plant
(BoP), deep sea drilling, desalinization, gas compression, and other
facility-wide equipment management systems. The control system
primarily consists of three hardware components: controller(s), I/O
network (IONet) switches, and I/O modules. The control system
provides more options for redundancy, better maintainability, and
greater capability for locating I/O modules closer to the controlled
equipment
3.DCS, PLC
DCS and PLC Network and its Locations