Professional Documents
Culture Documents
MNK, MNK-B
Magnetic Drive Pumps
9
2
6
7
7
1
8
5
4
Solids-laden media
can be conveyed with solids con-
tents of up to 50 % and grain sizes
of up to 20 mm. Special pump
High-performance permanent
accessories are required for these
magnets
applications.
Patented magnet attachment.
High-quality external
Free from eddy currents
corrosion protection
Non-metallic double can system • No heating of the medium
Epoxy coating of the pump,
• wetted: PTFE, PFA, PFA-P, • High secondary corrosion
screws and drive shaft made
PFA-L resistance
from stainless steel.
• pressure-bearing: carbon-fibre • Optional can monitoring
reinforced plastic (CFRP)
• pressure-resistant, breakproof,
high safety reserves
3
MNK, MNK-B
100 339 401 509/1 518 158 159 213 525 321 361
211
230
545
504
412
122
415/1
4
MNK, MNK-B
The pump housing Impeller with curved vanes point can therefore be conveyed
with ductile cast iron armouring The large metal core ensures without the introduction of heat.
absorbs all the hydraulic and dimensional stability, even at Optional can and bearing pedestal
pipework forces to DIN/ISO5199/ elevated temperatures and high
Europump 1979. In contrast to flow rates.
partially or non-armoured plastic Axial forces are reduced by back
pumps, no expansion joints are vanes.
required. Flanges with service-
The metal core is protected by a
minded through holes to DIN,
thick-walled seamless plastic
ANSI, BS, JIS.
lining. The impeller is secured
Available on request: Double can
against loosening if the pump is
• Housing drain, also serves as started up in the wrong direction
a flushing and monitoring con- of rotation or in the case of back-
nection. flowing media. monitoring increases safety with
• Heating jacket, e.g. for crystal- particularly hazardous media.
lising or polymerising media.
Can also be retrofitted.
Plain bearings of pure SSiC with
optional Richter SAFEGLIDE® PLUS
dry-run-optimisation. They make a
decisive contribution to operational
reliability and the long service life
of the pump. Richter has gained
experience in thousands of appli-
cations.
Impeller Pure SSiC as a base material
produces maximum dimensional
stability; the optional Richter
Eddy-current-free double can
SAFEGLIDE® PLUS system offers
The metal-free can system does
protection against damage from
not induce any eddy currents and
dry-running. This optimised feature
thus avoids unnecessary heat gen-
of the second generation has even
Pump housing
eration.
withstood dry-run trials
Efficiency and operational reliability lasting 30 to 60 min.
benefit from this. Even low flow (at 2900 rpm).
rates or media near their boiling
Close-coupled pump
Plain bearings
9299-03-0075/4-0
0 5 10 20 50 100 200 500 1250 [USgpm]
position.
Q at n = 2900 rpm (50 Hz)
**Delivery heads above the dashed line apply to 2900 rpm
Publication No. 643en 05.06 © Richter Chemie-Technik GmbH. Subject to change without notice. Printed in Germany.
20 6 30
8
5
25-25-125
4 6 20
5
10 3
4
25-25-100
2 125-80- 3 10
200
80-50-160
5
50-32-125 2
1 5
9299-03-0074/4-0
Presented by: