Professional Documents
Culture Documents
G1-T(T1(A1)
G1-A )
Opposed Blade
Damper (OBD)
38
H
W 42
50
Configuration
Dimensional Thickness
Data Customized Size Neck Size (WXH)
Frame Blade
Unit: mm
Product is equipped according to the size
WXH 0.6 0.6 of the square ceiling diffuser or grille.
◎This catalog is used as a reference guide only. The design of product is subjected to Opposed Blade Damper D1
change without further notice. Please refer the physical detail to the actual product.
Optional Accessories G1-A(A1)
Product Features
Adjustable Screw
■ The damper consists of single layer blade set. The
The open and close open and close mechanism of the blades is in V-
mechanism of the
blades is in V-shaped
shaped orientation.
orientation ■ The damper is gear operated. The adjustable screw is
accessible through surface of the diffuser or grille by a
screwdriver.
■ The maximum length of each blade is 50cm. The
blades will be customized differently beyond 50cm.
Suggested Specification
■ The ASLI G1-A type, Opposed Bald Damper, is made out of extruded aluminum alloy A6063 with single layer
blade set. The spacing between blades shall be 33mm as standard. The blade angle can be set to various
degrees through gear operation by turning the adjustable screw. The open and close mechanism of the
blades is in V-shaped orientation, and the maximum length of each blade is 500mm. The blades will be
customized differently beyond 50cm.
Order Method
WXH