Professional Documents
Culture Documents
SICAM 1703 IEC 60870-5-102: Interoperability
SICAM 1703 IEC 60870-5-102: Interoperability
Introduction 1
______________________________________________________________________________
SICAM 1703
Interoperability of SICAM 1703 according
IEC 60870-5-102 using 102MA0 (Master) 2
______________________________________________________________________________
Literature
______________________________________________________________________________
Interoperability
DC0-045-2.03
Disclaimer of Liability Copyright
Although we have carefully checked the contents of this publication Copyright © Siemens AG 2013
for conformity with the hardware and software described, we cannot The reproduction, transmission or use of this document or its
guarantee complete conformity since errors cannot be excluded. contents is not permitted without express written authority.
The information provided in this manual is checked at regular Offenders will be liable for damages. All rights, including rights
intervals and any corrections that might become necessary are created by patent grant or registration of a utility model or design,
included in the next releases. Any suggestions for improvement are are reserved.
welcome.
This manual describes the interoperability of SICAM 1703 using protocol element according to
IEC 60870-5-102 and essentially contains
Target Group
The document you are reading right now is addressed to users, who are in charge of the
following tasks:
1. Introduction ........................................................................................................................7
3. Interoperability of SICAM 1703 according IEC 60870-5-102 using 102SA9 (Slave) ..19
Contents
This manual describes the interoperability of SICAM 1703 required for communication of
SICAM 1703 and integrated total DTE using IEC 60870-5-102 communication protocol.
Syntax:
strike-through the text descriptions of parameters which are not applicable to this
companion standard
102SA9 Protocol element (project specific) for communication according IEC 60870-5-
102 with multipoint configuration for the link between SICAM 1703 as
controlling station and integrated total DTE.
Contents
Interoperability
The companion standard IEC 60870-5-102 defines parameters and alternatives are those
from which subset have to be selected to implement particular systems for transmission of
integrated totals. Certain parameter values, such as the number of octets in the COMMON
ADDRESS OF ASDUs represent mutually exclusive alternatives. This means that only one
value of the defined parameters is admitted per system. Other parameters, such as the listed
set of different information in control and in monitor direction allow the specification of the
complete set or subsets, as appropriate for given applications. This clause summarizes the
parameters of the previous clauses to facilitate a suitable selection for a specific application. If
a system is composed of equipment stemming from different manufacturers, it is necessary
that all partners agree on the selected parameters.
Note:
In addition, the full specification of a system may require individual selection of certain
parameters for certain parts of the system, such as the individual selection of scaling factors
for individually addressable measured values.
X Point-to-point X Multipoint-partyline
X Multiple point-to-point X Multipoint-star
Dialled point-to-point
Frame format FT 1.2, single character 1 and the fixed time out interval are used exclusively in
this standard.
Frame length
Mode 1 (least significant octet first), as defined in 4.10 of IEC 870-5-4, is used
exclusively in this companion standard.
Manufacturer code
(manufacturer-specific parameter)
Number Manufacturer
1 ________________________
2 ________________________
......
255 ________________________
X 1 Octet X 2 Octets
Signature
(system-specific parameter)
X Signature X No signature
Record address
(system-specific parameter)
X Basic values
X Period 1 Period time:
X Period 2 Period time:
X Period 3 Period time:
Tariff information
(system-specific parameter)
Number of periodically reset operational integrated totals max. 2000 for all stations and
types
Integrated totals are transmitted by read functions only (including latest period)
Read records
(station-specific parameter)
Size of record:
Complete record X Number of single-point information:
Record section 1 X Number of single-point information:
Record section 2 X Number of single-point information:
Record section 3 X Number of single-point information:
Record section 4 X Number of single-point information: max. 1000 for all stations and
types
Contents
Interoperability
The companion standard IEC 60870-5-102 defines parameters and alternatives are those
from which subset have to be selected to implement particular systems for transmission of
integrated totals. Certain parameter values, such as the number of octets in the COMMON
ADDRESS OF ASDUs represent mutually exclusive alternatives. This means that only one
value of the defined parameters is admitted per system. Other parameters, such as the listed
set of different information in control and in monitor direction allow the specification of the
complete set or subsets, as appropriate for given applications. This clause summarizes the
parameters of the previous clauses to facilitate a suitable selection for a specific application. If
a system is composed of equipment stemming from different manufacturers, it is necessary
that all partners agree on the selected parameters.
Note:
In addition, the full specification of a system may require individual selection of certain
parameters for certain parts of the system, such as the individual selection of scaling factors
for individually addressable measured values.
X Point-to-point X Multipoint-partyline
X Multiple point-to-point X Multipoint-star
Dialled point-to-point
Frame format FT 1.2, single character 1 and the fixed time out interval are used exclusively in
this standard.
Frame length
Mode 1 (least significant octet first), as defined in 4.10 of IEC 870-5-4, is used
exclusively in this companion standard.
Manufacturer code
(manufacturer-specific parameter)
Number Manufacturer
1 ________________________
2 ________________________
......
255 ________________________
X 1 Octet X 2 Octets
Signature
(system-specific parameter)
X Signature No signature
Record address
(system-specific parameter)
X Basic values
X Period 1 Period time:
X Period 2 Period time:
X Period 3 Period time:
Tariff information
(system-specific parameter)
Number of periodically reset operational integrated totals max. 100 for all types
Integrated totals are transmitted by read functions only (including latest period)
Read records
(station-specific parameter)
Size of record:
Complete record Number of single-point information:
Record section 1 Number of single-point information:
Record section 2 Number of single-point information:
Record section 3 Number of single-point information:
Record section 4 Number of single-point information:
ACP 1703 Common Functions System and Basic System Elements DC0-015-2
ACP 1703 Platforms Configuration Automation Units and Automation Networks DC0-021-2
IEC 60870-5-102
Fernwirkeinrichtungen und -systeme
Teil 5: Übertragungsprotokolle
Hauptabschnitt 102: Anwendungsbezogene Norm für die Zählerstandsübertragung
in der Elektrizitätsversorgung (IEC 60870-5-102: 1996)
IEC 60870-5-102 {Ed.1.0}
Telecontrol equipment and systems
Part 5: Transmission protocols
Section 102: Companion standard for the transmission of integrated totals in
electric power systems (1996-06)
Beschreibung der Firmware 102MA0 DC0-045-2.03
IEC60870-5-102 Zentralenfunktion (Unbalanced Multipoint Master)
zur Ankopplung von elektronischen Zählgeräten