Professional Documents
Culture Documents
OPC-1862 OPC-2357
OPC-2338
D Cloning software compatibility
The connector of OPC-478UC, OPC-966U, and OPC-
Ferrite EMI filter CD OPC-1637 1122U USB type cloning cables are basically the
same as the same numbered RS-232C type cables.
Therefore, you can use the USB type cables with most
IMPORTANT: Some Icom cloning software can only of the Icom cloning software that require the RS-232C Click Next>
select ports 1 to 4. When several external devices, type cables.
such as a printer, scanner, or hard-disk drive are con-
nected to the USB port, the port number available for
the cloning software may be port 5 or higher. There-
fore, you must first change the external device to a
port number other than 1 to 4.
CABLE CONNECTION (STEP 2) COM PORT CONFIRMATION (STEP 3)
After completing Step 1, connect the cloning cable or wwThe status is displayed at the bottom of the desktop After the driver installation has completed, confirm the rrClick the “” next to “Ports (COM&LPT).”
data cable to the PC. The PC automatically starts the screen. driver availability and the port number. Confirm “Icom USB-to-Serial Comm Port (COM✱)”
USB-to-Serial Comm Port installation. Wait a moment until it disappears. The COM port number is used to set communications is displayed.
with the cloning software. • In this example, the COM port number is “3.”
qqConnect the cloning cable or data cable to the USB
cable, and then the USB cable to the PC’s USB port, qqSelect “Desktop” and click the folder icon at the bot-
as illustrated below. tom of the screen.
• Attach the Ferrite EMI filter to the USB cable and Shows the status • The “Libraries” window is displayed
the tip of the strain relief. For your information: If the status is clicked, the
“Installing Icom USB-to-Serial Comm Port (COMQ)” Click
dialog is displayed.
USB cable Strain relief q Click
• “Q” is the number of the COM port. wwRight-Click [Computer], and then click [Properties],
as shown below.
• The “System” window appears.
Cloning cable
• If the COM port number is not displayed, or sever-
or al numbers are displayed at the same time like
data cable eeWhen the status disappears, the installation is com- “Icom USB-to-Serial Comm Port (COM✱)(COM✱),”
pleted. w Click the driver may not be properly installed. In such
Reboot the PC. case, uninstall the USB driver and install it again.
eeClick [Device Manager]. • You can uninstall the program using the “Uninstall
• “Device Manager” appears. a program” in the Windows Control Panel.
Click
DISPOSAL
The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the
European Union, all electrical and electronic products, batteries, and accumulators (rechargeable bat-
teries) must be taken to designated collection locations at the end of their working life.
Do not dispose of these products as unsorted municipal waste.
Dispose of them according to the laws in your area.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom,
Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries.
Adobe and Reader are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries.
All other products or brands are registered trademarks or trademarks of their respective holders.