Professional Documents
Culture Documents
Before installing the board, please ensure that the following System Specifications
items have been shipped:
• Ethernet: 2 x 10/100/1000M Ethernet
1. 1 x ITA-2230 Series IPC • USB: 4 USB 3.0, 4 USB 2.0
2. 1 x ITA-2230 Accessory Box • VGA: 1 VGA
3. 1 x ITA-2230 Warranty Card • HDMI: 1 HDMI
If any of the above items are missing or damaged, please • Serial port: 2 DB9 ports, support RS-232/422/485
contact your distributor or sales representative immediately. • Digital I/O: 1 x 8-ch TTL GPIO
• Audio: 1 Speaker Out (support 2x4W Amp),1 Mic-in
Note: Adobe Acrobat Reader is required to view PDF • ITAM module (optional): ITAM modules can be optional
inserted into three ITAM slots to make LAN or COM ports
files. Adobe Acrobat Reader can be downloaded at www.
up to 24 additional ports for expansion needs.
adobe.com/Prodindex/acrobat/readstep2.html (Acrobat is a
trademark of Adobe). Mechanical and Environment
• Dimensions (W x H x D): 483 x 88 x 325 mm
• Voltage input: AC 100-240 or DC 110V
Specifications • Working temperature:
- 0 -40° C (32 ~ 104° F , with HDD)
Standard Function - 25 - 60° C (-13 ~ 140° F, with SSD)
• Chip & Chipset: Intel Core™ i7-3555LE processor and • Weight:
HM76 Chipset - Single Power: 7.7 kg
• BIOS: AMI SPI 64 Mb - Dual Power: 8 kg
• Memory: Onboard DDR3 1600 up to 4GB
• Display:
Intel HD4000, Frequency 550MHz, Jumpers and Connectors
Share system memory up to 512MB SDRAM
• Dual display mode: Jumper/Connector Setting
Resolution of single display up to 2048 x 1536,
1 x VGA, 1 x HDMI, 1 x eDP (Optional) The board has a number of jumpers and connectors that
allow you to configure your system to suit your application.
• Storage:
- 1 x 3.5”HDD or 2 x 2.5”HDD The table below lists the function of each of the jumpers
- 1 x Full Size mSATA and connectors.
• Expansion slot:
- 3 x ITAM slot Name / Function
- 1 x PC104+ JCMOS1 Clear CMOS setting
- 1 x Mini PCIe slot
PSON1 Power on mode setting
9 RI NC NC
10 TMDS Clock+
Pins Setting
VGA 1: VGA
1-6 +3.3V
Pins Signal Name Pins Signal Name
4-9 Normal(+5V)*
1 Red(Red) 9 +5V
*Default setting
2 Green(Green) 10 GND
3 Blue(Blue) 11 NC
4 NC 12 DDC-DATA
3 TxD Rx+ NC
5 StdA_SSRX- Pin2 N
Pin3 L
10M No lights
1 GPIO0 6 GPIO4
SATA2.0
LPT1
SATA3.0
SATA_PWR1
SATA_PWR2
PSON1
JCMOS1
mini-PCIe Slot
PC104_ISA
VIO1
PC104_PCI
ITAM Slot1
ITAM Slot2
ITAM Slot3
Reset Button USB Power LED HDMI LAN Audio Power Supply