Professional Documents
Culture Documents
Review 03 - June/2015
UNILENE® A Serie
Description
Thermoplastic resin with a low molecular weight obtained through catalytic
polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and
presented in soft yellow colored scale. Compatible with the most solvents and
polymeric materials.
Application
Rubber – improves the processability of compounds, fillers incorporation, dispersion
and tack of the mass, avoiding the elastomer deterioration and reducing the
preparation time.
Hot Melt and Solvent Based Adhesives – promotes tack, wetting, cohesion, open time
control and water repellent.
Others – mastics and asphalts, concretes curing, paint and varnishes, road marking
paints and plastics compounds.
Technical Specification
Shelf Life
2 (two) years from production, since the recommended storage conditions are
respected.
Final Remarks
The information presented in this Data Sheet reflects typical values obtained in our laboratories, but should
not be considered as absolute or as warranted values. Only the properties and values mentioned on the
Certificate of Quality are considered as guarantee of the product.
In case of doubt regarding utilization, or for other applications, please contact our Technical Assistance.
For information about safety, handling, individual protection, first aids and waste disposal, please see MSDS.
The mentioned values in this report can be changed at any moment without Braskem previous
communication. The content of this Data Sheet replaces previous revisions published for this product.