Professional Documents
Culture Documents
Technical Data: Specifications & Capacities
Technical Data: Specifications & Capacities
Technical Data
Specifications & Capacities
Table Of Contents
Upper Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hydraulic System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Load Hoist Drums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Optional Front-Mounted Third Hoist Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Optional Rear-Mounted Fourth Hoist Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Boom Hoist Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Swing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Operator Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Rated Capacity Limiter System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Boom Hoist System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Machinery Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Catwalks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lower Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Carbody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Side Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Travel and Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optional - Jack System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Attachment and Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Conventional Tube Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Angle Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Tube Jib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Luffing Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Auxiliary Tip Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Luffing Jib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Base Crane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Side Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Upper Counterweights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Lower Counterweights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Boom/Luffing Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Jib/Luffing Jib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Hook Balls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Hook Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Working Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Transport Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Transport Drawings - Tube Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Load Hoist Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Working Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Main Boom Make-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Main Boom Working Range Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Upper Structure
Frame Hydraulic System Load Hoist Drums
All welded steel frame with precision Hydraulic Pumps Each drum contains an axial piston, vari
machined surfaces for mating parts. The pump arrangement is designed to able speed hydraulic motor with individu
provide hydraulically powered functions al automatic winch motor brakes. Power
Turntable Bearing
flow is directed through a patented,
S Inner race with internal swing gear is allowing positive, precise control with in
dependent or simultaneous operation of semi-outboard mounted, “wet” style
bolted to lower frame.
multi-disc brake. The brake is mounted
S Outer race is bolted to upper frame. all crane functions.
on the “output” side of the planetary,
S Two variable displacement pumps
which greatly reduces drag associated
operating at 4,551 psi (320kg/cm2) and
with most “wet” style brakes in free-fall
Engine 70.3 gal/min (266L/min) powers load
mode.
hoist drums, boom hoist drum, optional
S Power up/down & free-fall operation
Engine third drum, optional fourth drum, and
modes
travel.
Full pressure lubrication, oil filter, air S Automatic brake mode (spring applied,
cleaner, hour meter, throttle, and electric S One variable displacement pump
hydraulically released, wet type brake)
operating at 4,623 psi (325kg/cm2) and
control shutdown. S Drum lagging grooved for wire rope
40.2 gal/min (152L/min) powers the S Drum pawl controlled manually
swing motors. S Electronic drum rotation indicators
Cummins QSB6.7 Tier 4 Final
S One fixed displacement gear type S Mounted on anti-friction bearings
Number of cylinders 6 pump operating at 2,985 psi S 21.81 in (0.55m) root diameter
(210kg/cm2) and 15.1 gal/min (57L/min) S 37.81 in (0.96m) flange diameter
4.20 in x 4.88 in powers the lower jacks, counterweight
Bore and stroke
(107 x 124mm) S 25.25 in (0.64m) width
removal, self assembly, side frame
Piston displacement 408 in3 (6.8L)
The free-fall operation mode is designed
extend/retract, and hoist brake cooling.
to prevent load lowering even if the free-
Engine rpm at full S One fixed displacement gear type
2,000 rpm fall switch is accidentally activated.
load speed pump operating at 1,422 psi
(100kg/cm2) and 10.3 gal/min (39L/min) The automatic brake mode meets all
Hi‐idle rpm 2,000 rpm OSHA requirements for personnel han
powers the pilot control system,
Gross engine hp 270 hp (210kw) clutches, brakes, and pump controls. dling.
730 ft lb (990joule) @
S One fixed displacement gear type
Peak torque pump operating at 1,420 psi
1,500 rpm
(100kg/cm2) and 7.9 gal/min (30L/min) Optional Front-Mounted
Electrical system 24 volt
powers the optional tagline winch. Third Hoist Drum
Fuel tank capacity 122 gal (460L)
Hydraulic Reservoir
Batteries 2-12 volt
The hydraulic winch is pinned to the front
85 gal (320L), equipped with sight level of the upper frame and is used in conjunc
Approximate fuel gauge. Diffusers built in for deaeriation. tion with a fleeting sheave and 3-sheave
gal/hr (L/hr)
consumption
Filtration idler assembly to run the wire rope over
100% hp 12.62 (47.77) the boom top section.
Ten micron, full flow, line filter in the control
circuit. All oil is filtered prior to entering the S Power up/down for luffer applications
75% hp 10.57 (40.01)
reservoir. where a second load line is needed
50% hp 7.57 (28.66) S Controlled free spooling capability for
Counterbalance Valves pile driving applications or auxiliary
25% hp 4.16 (15.75)
All hoist motors are equipped with coun hoist line for luffer applications.
terbalance valves to provide positive load S 12.75 in (0.32m) root diameter
Fuel Tank
lowering and prevent accidental load S 22.75 in (0.58m) flange diameter
Equipped with fuel sight level gauges, drop if the hydraulic pressure is suddenly S 17 in (0.43m) width
flame arrester, and self-closing cap with lost. S Mounted on anti-friction bearings
door lock. S Drum lagging grooved for wire rope
Lower Structure
Track Rollers
Carbody S Ten sealed (oil filled) track rollers per Travel and Steering
side frame
Lower Frame S Heat treated, mounted on oil filled anti- Travel and Steering
All welded high strength steel [65,000 psi friction bearings Each side frame contains a pilot con
(448.16MPa) yield] box construction Tracks trolled, bi-directional, axial piston motor
frame with precision machined surfaces and a planetary gear reduction unit to pro
for turntable bearing and rotating joint. Heat treated, self-cleaning, multiple vide positive control under all load condi
hinged track shoes joined by one-piece
S 9 ft 11 in (3.02m) overall width tions.
full floating pins; 53 shoes per side frame
S 11 ft 11 in (3.60m) overall length S Individual control provides smooth,
Take Up Idlers precise maneuverability including full
Cast steel, heat treated, self-cleaning, counter-rotation.
Side Frames mounted on aluminum/bronze bushings. S Spring applied, hydraulically released
Lubricated through idler shaft. disc type brake controlled automatically
Side Frames S Track Tension Adjustment - Idler S Maximum travel speed is 1.2 mph
All welded, precision machined, steel wheel adjusted by means of hydraulic (1.93km/h).
frames can be hydraulically extended and cylinder and hand pump. Idler wheel S Designed to 30% gradeability
retracted by a hydraulic cylinder mounted shaft held in position with shims after
in the lower frame. adjustment is made.
S 14 ft 2 in (4.32m) extended gauge Optional - Jack System
S 9 ft (2.74m) retracted gauge
System contains four hydraulic cylinders
S 20 ft 6 in (6.25m) overall length
individually pinned on swing out beams.
S 36 in (0.91m) wide track shoes
S Sealed (oil filled) drive planetaries S Individual controls are mounted on car
S Compact travel drives body.
S Automatic hydraulic track adjustment S Minimum height of carbody when rest
system - optional ing on pontoons is 16 in (0.41m).
S Maximum height of carbody when rest
ing on pontoons is 42 in (1.07m).
S 15 ft (4.57m) jib extensions provide jib ings. Maximum capacity is 18.5 Ton
Angle Boom lengths of 45 ft (13.72m), 60 ft (18.29m), (16.78mt).
45-155 ft (13.72-47.24m) and 75 ft (22.86m).
S Jib offset angles at 5°, 15°, and 25°
Basic Angle Boom S The maximum tip height of boom + jib Luffing Jib
45 ft (13.72m) two-piece design that [200 ft + 75 ft (60.96 + 22.86m)] is 50-140 ft (15.24-42.67m)
utilizes a 20 ft (6.10m) base section and 278.6 ft (84.92m).
a 25 ft (7.62m) top section with in-line Basic Luffing Jib
connecting pins on 60 in (1.52m) wide 50 ft (15.24m) four-piece design utilizes a
and 54 in (1.37m) deep centers. Luffing Boom
5 ft (1.52m) luffing boom top section, 20 ft
S Boom foot on 55.12 in (1.40m) centers 80-150 ft (24.38-45.72m)
(6.10m) luffing jib base section, 20 ft
S 4 in x 4 in x 0.5 in (10.16cm x 10.16cm x (6.10m) luffing jib top section, and 10 ft
1.27cm) angle chords S Common base and extensions as open
(3.05m) jib extension with in-line con
S Lugs on base section for self assembly throat boom (“HP” only)
necting pins. Jib extensions are 48 in
S Deflector roller on top section S 5 ft (1.52m) luffing extension required
(1.22m) wide and 39 in (0.99m) deep at
S Rigid sheave guards for bail anchor
the centers.
S Tip extension and jib connecting lugs S Working angles of 90°, 85°, 80°, 75°,
S 25 Ton (22.68mt) maximum capacity
on top section 70°, and 65°
S Working lengths of 50 ft (15.24m) to
S Three, 24.75 in, (62.87cm) root diame S Working lengths of 80 ft (24.38m) to
140 ft (42.67m)
ter lift sheaves mounted on sealed 140 ft (42.67m)
S Lugs on base section to attach fan-
anti-friction bearings with rope guards Luffing Boom Extensions post transport links
S Self assembly cylinder - optional S Two steel 22.50 in (0.57m) diameter luf
The following table provides the lengths
Angle Boom Extensions available and the suggested quantity to fing jib head sheaves
The following table provides the lengths obtain the maximum luffing boom in 10 ft S Two polyamide 21.25 in (0.54m)
available and the suggested quantity to (3.05m) increments. Midpoint pendants diameter luffing boom auxiliary head
obtain maximum boom in 10 ft (3.05m) in are not required. sheaves
crements. Midpoint pendant connections S Pin-on nose wheel
are not required. Luffing Boom S Eight-part luffing jib hoist
Extensions Quantity For Max S 1.25 in (31.75mm) diameter type “N”
Angle Boom Boom pendants
Extensions ft m
Quantity For Max S Anemometer with in-cab display
Boom 10 3.05 1
ft m Luffing Jib Extensions
20 6.10 2 The following table provides the lengths
10 3.05 1
30 9.14 1 available and the suggested quantity to
20 6.10 2 obtain the maximum luffing jib in 10 ft
40 12.19 1 (3.05m) increments. Midpoint pendants
30 9.14 2 are not required.
Note: “HP” type boom must be used.
S Appropriate length pendants
S Rear hoist drum becomes luffing jib Luffing Jib
S Maximum angle boom tip height of Extensions
hoist Quantity For Max
160.51 ft (48.92m).
S Optional third drum provides second Luffing Jib
ft m
working hoist line, if required.
Tube Jib S Designed for self-assembly 10 3.05 1
30-75 ft (9.14-22.86m) S Luffing jib hoist bridle and bail can re
main reeved for crane transport 20 6.10 1
S Job site mobility with attachment 30 9.14 2
Basic Tube Jib
S Rolled out or rolled under erection
30 ft (9.14m) two-piece design that uti methods S Deflector roller on top of each extension
lizes a 15 ft (4.57m) base section and a S Appropriate length pendants
S Compact transport module
15 ft (4.57m) top section with in-line S Maximum luffing jib tip height of 283 ft
connecting pins on 32 in (0.81m) wide (86.26m)
and 24 in (0.61m) deep centers. Auxiliary Tip Extension
S 2 in (50.8mm) diameter chords
S One 18.50 in (0.47m) root diameter Designed to use in place of jib to provide
steel sheave mounted on sealed anti- clearance between working hoist lines.
friction bearings The extension is equipped with two nylon
18 in (45.72cm) root diameter sheaves
mounted on sealed anti-friction bear
Dimensions
General Dimensions English Metric
Basic Boom 40 ft 12.19m
Minimum Load Radius 11.28 ft 3.44m
Maximum Boom Angle 80° 80°
Track Shoe Width 36 in 0.91m
Maximum height of
live mast from ground
is 30' 11” (9.42m)
22' 10”**
(6.96m)
11' 4”
(3.46m)
7' 5”
(2.26m)
4' 6.75”
(1.39m)
13' 0.75”
(3.98m)
15' 2.5”
(4.63m)
C
L OF ROTATION
Note: **@ Maximum boom angle (80°) with maximum boom [240 ft (73.15m)], maximum rotation radius occurs.
Tailswing Radius
15' 5” (4.70m)
11' 9.75”
(3.60m)
36”
(0.91m)
43.81”
(1.11m)
11.12” 16.44”
(0.28m) (0.42m)
14' 2” (4.32m) Extended
9' 0” (2.74m) Retracted
Base Crane
Base Crane Ê
Length 1 20 ft 6.25 in (6.25m)
Length 2 41 ft 1.31 in (12.53m)
Length 3 4 ft 10.25 in (1.48m) H
Height 14 ft 10 in (4.52m)
Weight:
Tube Boom 99,508 lb (45 136kg)
Angle Boom 100,693 lb (45 674kg)
L3 L1
L2
Base Crane w/
Optional Jacks Ê
Width 8 ft 5.33 in (2.57m)
Height* 35.34 in (0.90m)
Weight 67,250 lb (30 504kg)
* Maximum height on pontoons
H*
Side Frames
Side Frames Ë W
Length 20 ft 6.25 in (6.25m)
Width 36 in (0.91m)
Height 43.81 in (1.11m) L
Weight 19,450 lb (8 822kg)
Upper Counterweights
W
“A” Slab Counterweight Ê
Length 45.44 in (1.15m)
Width 11 ft 9.75 in (3.60m) L
Height 6 ft 6 in (1.98m)
Weight 25,260 lb (11 458kg)
Lower Counterweights
L
Side Frame Counterweights Ë
Length 9 ft 1 in (2.77m)
Width 15.16 in (0.39m) H
Height 29.50 in (0.75m)
Weight 11,100 lb (5 035kg)
Boom/Luffing Boom
60 in (1.52m) x 50 in (1.27m)
Tube Boom/Luffing Boom
Extensions 64.88” (1.65m)
10' 4”
(3.15m)
10 ft (3.05m) Extension 55”
(1.40m)
Weight: 635 lb (288kg)
64.88” (1.65m)
20' 4”
(6.20m)
20 ft (6.10m) Extension 55”
Weight: 1,085 lb (492kg) (1.40m)
64.88” (1.65m)
30' 4” (9.25m)
64.88” (1.65m)
40' 4” (12.29m)
60 in (1.52m) x 54 in (1.37m)
Angle Boom Extensions
64.88” (1.65m)
10' 4”
(3.15m)
10 ft (3.05m) Extension 55”
(1.40m)
Weight: 1,281 lb (581kg)
64.88” (1.65m)
20' 4”
(6.20m)
20 ft (6.10m) Extension 55”
Weight: 2,330 lb (1 057kg) (1.40m)
64.88” (1.65m)
30' 4” (9.25m)
L
20 ft (6.10m) Tube Boom
Base Section Ê
Length 20 ft 7.5 in (6.29m)
Width 64.88 in (1.65m) W
Deep 50 in (1.27m)
Height 65.50 in (1.66m)
Weight
w/o Self Assembly 1,737 lb (788kg)
w/ Self Assembly 2,111 lb (958kg)
D H
L
20 ft (6.10m) Angle Boom
Base Section Ê
Length 20 ft 7.5 in (6.29m)
Width 65.50 in (1.66m) W
Deep 54 in (1.37m)
Height 65 in (1.65m)
Weight 3,174 lb (1 440kg)
D H
Number inside black circle “Ê” = # of components
* - Optional equipment
Jib/Luffing Jib
15 ft (4.57m) Jib
W
Top Section* Ê L
Length 16 ft 1.50 in (4.91m)
Width 34.50 in (0.88m)
Height 26.50 in (0.67m)
H
Weight† 604 lb (274kg)
† Weight includes pendants and hardware.
15 ft (4.57m) Jib
L
Base Section* Ê
Length 15 ft 3.50 in (4.66m)
Width 34.50 in (0.88m)
Height 1 26.50 in (0.67m) W
Height 2 54.50 in (1.38m)
Weight† 1,106 lb (502kg)
† Weight includes pins, basic frontstay & backstay
pendants, and hardware.
H2
H1
15 ft (4.57m) Jib W
Extension* Ê L
Length 15 ft 2.50 in (4.64m)
Width 34.50 in (0.88m)
Height 26.50 in (0.67m)
Weight† 330 lb (150kg)
† Weights includes pins, pendants, and hardware. H
Number inside black circle “Ê” = # of components
* - Optional equipment
58.75” (1.49m)
20' 4” (6.20m)
58.75” (1.49m)
30' 4” (9.25m)
20 ft (6.10m) Luffing
Jib Top Section* Ê W
L
Length 24 ft 8.25 in (7.52m)
Width 58.75 in (1.49m)
Height 48 in (1.22m) H
Weight† 2,800 lb (1 270kg)
† Weight includes pendants and hardware.
Hook Balls W
15 Ton (13.6mt) Swivel
Hook Ball* Ê
Width 17.50 in (0.44m)
Height 40.50 in (1.03m)
H
Weight 767 lb (348kg)
Hook Blocks W1 W2
25 Ton (22.7mt)
2-Sheave Hook Block* Ê
Width1 16.50 in (0.42m)
Width2 24.75 in (0.63m)
Width3 11.00 in (0.28m)
Height 46.25 in (1.17m)
Weight 1,167 lb (529kg)
H
W3
80 Ton (72.6mt)
W1 W2
4-Sheave Hook Block* Ê
Width1 28.75 in (0.73m)
Width2 15.00 in (0.38m)
Width3 20.25 in (0.51m)
Height 69.75 in (1.77m)
Weight 1,520 lb (689kg)
W3
W1 W2
110 Ton (99.8mt)
4-Sheave Hook Block* Ê
Width1 28.75 in (0.73m)
Width2 28.00 in (0.71m)
Width3 23.00 in (0.58m)
Height 65.50 in (1.66m)
Weight 2,975 lb (1 349kg) H
W3
Number inside black circle “Ê” = # of components
* - Optional equipment
Working Weights
Ctwt “ABC” +
Ctwt “A” Ctwt “AB”
Based on basic crane including Isuzu AH-6HK1X diesel engine, turntable bearing, live “A” Lower Ctwt
mast, 12 part boom hoist reeving, backstops, crawler lower with 36 in (0.91m) wide
track shoes, sealed track rollers, and catwalks, plus the following: lb lb lb
(kg) (kg) (kg)
Lifting crane - includes 40 ft (12.19m) basic tube, self assembly cylinder, 870 ft 130,458 149,198 190,058
(265.18m) of 26mm type “DB” hoist rope, 650 ft (198.12m) of 26mm type “RB” hoist (59 174) (67 675) (86 209)
rope, 110 Ton (99.8mt) 4-sheave hook block, and basic pendants.
psi 8.10 9.27 11.80
Ground Bearing Pressure
kg/cm2 0.57 0.65 0.83
Transport Weights
Base Crane: Rigid Boom Backstops, 110 gal (416L) Of Fuel, Side Frames, 22' (6.7m) Live Mast, 12-part Boom Hoist Reeving, 870' (265.18m) Of
Type “DB” Front Hoist Rope, 650' (198.12m) Of Type “RB” Rear Hoist Rope.
Gross Weight Transport Loads
Item Description
lb kg #1 #2 #3 #4
Base Crane 97,037 44 016 1
Base Counterweight 25,260 11 458 1
Add Upper Counterweight Wing (Right) 9,410 4 268 2
Add Upper Counterweight Wing (Left) 9,370 4 250 1 1
Add Side Frame Counterweight 11,100 5 035 2
Add Lower Jacking System 5,962 2 704
Add Hydraulic Third Drum Without Rope 1,850 839
Add Hydraulic Fourth Drum Without Rope 4,367 1 981
Add 20' (6.1m) Tube Base Section 1,991 903 1
Add 20' (6.1m) Tube Top Section 2,309 1 047 1
Add 10' (3.05m) Tube Extension With Pins And Pendants 601 273 1
Add 20' (6.1m) Tube Extension With Pins And Pendants 1,309 594 2
Add 30' (9.14m) Tube Extension With Pins and Pendants 1,826 828 1 1
Add 40' (12.19m) Tube Extension With Pins And Pendants 2,312 1 049 1 1
Add 20' (6.1m) Angle Base Section 3,174 1 440
Add 20' (6.1m) Angle Top Section 3,835 1 740
Add 10' (3.05m) Angle Extension With Pins And Pendants 1,281 581
Add 20' (6.1m) Angle Extension With Pins And Pendants 2,330 1 057
Add 30' (9.14m) Angle Extension With Pins and Pendants 3,126 1 418
Add Self Assembly 480 218 1
Add Tagline Winder With Rope 1,040 472
Add Fairleader 500 227
Add 30' (9.1m) Tube Jib 690 313 1
Add 15' (4.6m) Tube Jib Extension 270 122 3
Add Auxiliary Tip Extension 640 290
Add Pile Driver Lead Adaptor 198 90
Add Holding Rope - 26mm X 220' Type “DB” 352 160
Add Closing Rope - 26mm X 165' Type “DB” 444 201
Add Inhaul Rope - 26mm X 80' Type “M” 185 84
Add Hoist Rope - 26mm X 700' Type “DB” 1,295 587
Add Hoist Rope - 26mm X 700' Type “CC” 1,421 645
Add Jib Wire Rope - 1” X 700' Type “DB” 1,295 597
Add 3rd Drum Wire Rope - 0.75” X 550' Type “DB” 572 259
Add 4th Drum Wire Rope - 0.75” X 550' Type “DB” 1,314 596
Add 15-ton (13.6mt) Hook Ball - Non Swivel 750 340
Add 15-ton (13.6mt) Hook Ball - Swivel 760 345
Add 110-ton (99.8mt) 4 Sheave Hook Block 2,975 1 349
Remove Front Hoist Rope - 26mm X 870' Type “DB” -1,610 -730
Remove Jib Wire Rope - 26mm X 650' Type “RB” -1,300 -590
Remove 50 gal (190L) Of Fuel -362 -164
lb 99,508 39,349 32,248 28,647
Approximate Total Shipping Weight
kg 45 137 17 849 14 628 12 994
Notes:
Estimated weights vary by ± 2%. Numbers in the load columns (numbers 1-5) represent quantities.
Estimated transport loads assume the load out consist of 230' (70.1m) of tube boom and 75' (22.86m) of jib with full counterweight.
Support loads were targeted at 45,000 lb (20 412kg), 8' 6” (2.6m) wide, 48' (14.6m) long, and 13' 6” (4.1m) high using a drop deck trailer. This may vary depending on
state laws, empty truck/trailer weights, and style of trailer.
13' 0.50”
(3.97m)
13' 0.50”
(3.97m)
13' 0.50”
(3.97m)
Working Areas
360°
Over Side
Boom
See Note
Center Of
Rotation
Longitudinal
Of Crawler
Drive Sprocket
Over Side
Note: These Lines Determine The Limiting Position Of Any Load For Operation Within Working Areas Indicated.
Attachments
Auxiliary Tip
Extension
Main Main
Boom Boom
Offset
Jib
Luffing
Jib
Main Luffing
Boom Boom
Notes:
1. Capacities shown are in kips/metric tons (1 kip = 1,000 lb /
1 metric ton = 0.45 kips) and are not more than 75% of the
tipping loads with the crane standing level on firm
supporting surface. A deduction must be made from these
capacities for weight of hook block, hook ball, sling,
grapple, load weighing device, etc. When using main hook
while jib or tip extension is attached, reduce capacities by
values shown in Crane Rating Manual. See Operator's
Manual for all limitations when raising or lowering
attachment.
2. The capacities in the shaded areas are based on structural
strength. The capacities in the non-shaded areas are
based on stability ratings.
3. For recommended reeving, parts of line, wire rope type,
and wire rope inspection, see Wire Rope Capacity
Chart, Operator's Manual, and Parts Manual.
4. Load ratings are based on freely suspended loads and
make no allowances for such factors as the effect of the
wind, ground conditions, and operating speeds. The
operator shall therefore reduce load ratings in order to
take these conditions into account. Refer to the Crane
Rating Manual for Wind Speed Restrictions.
5. The 26 ft (7.92m) live mast must be used for all capacities
listed.
6. The least stable rated condition is over the side.
7. Booms must be erected and lowered over the end for
maximum stability.
8. Main boom length must not exceed 230 ft (70.10m).
Notes:
1. Capacities shown are in kips/metric tons (1 kip = 1,000 lb / 9. Do not operate at radii and boom lengths where the
1 metric ton = 0.45 kips) and are not more than 75% of the Crane Rating Manual lists no capacity. Do not use
tipping loads with the crane standing level on firm longer booms or jibs than those listed in the Crane
supporting surface. A deduction must be made from these Rating Manual. Any of the above can cause a tipping
capacities for weight of hook block, hook ball, sling, condition, or boom and jib failure.
grapple, load weighing device, etc. When using main hook 10. These capacities are in compliance with ASME/ANSI
while jib or tip extension is attached, reduce capacities by B30.5 at date of manufacture.
values shown in Crane Rating Manual. See Operator's 11. These capacities apply only to the crane as originally
Manual for all limitations when raising or lowering manufactured and normally equipped by Link‐Belt
attachment. Construction Equipment Company.
2. The capacities in the shaded areas are based on structural
strength. The capacities in the non-shaded areas are
based on stability ratings.
3. For recommended reeving, parts of line, wire rope type,
and wire rope inspection, see Wire Rope Capacity
Chart, Operator's Manual, and Parts Manual.
4. Load ratings are based on freely suspended loads and
make no allowances for such factors as the effect of the
wind, ground conditions, and operating speeds. The
operator shall therefore reduce load ratings in order to
take these conditions into account. Refer to the Crane
Rating Manual for Wind Speed Restrictions.
5. The 26 ft (7.92m) live mast must be used for all capacities
listed.
6. The least stable rated condition is over the side.
7. Booms must be erected and lowered over the end for
maximum stability.
8. Main boom length must not exceed 155 ft (47.24m).
60° 220'
210'
210'
200'
190' 200'
50° 190'
180'
180'
170'
170'
160' 40°
150' 160'
130' 140'
110' 120'
110'
100'
90' 100'
20° 90'
80'
70' 80'
60' 70'
60'
50'
10° 50'
40'
40'
30'
Notes:
1. Boom geometry shown is for unloaded condition and crane standing level on firm supporting surface. Boom deflection, subsequent
radius, and boom angle change must be accounted for when applying load to hook.
2. Maximum and minimum boom angles are equal to the values listed in the capacity chart for each boom length.
95
(29.0) 100
(30.5)
85
(25.9) 30° 90
(27.4)
75
(22.9) 80
(24.4)
65
(19.8) 70
(21.3)
55 20°
(16.8) 60
(18.3)
45
(13.7) 50
(15.2)
40
(12.2)
10°
30
(9.1)
20
(6.1)
Minimum Boom Angle 10
See Note 2. (3.0)
0
20 40 60 80 100 120 140 160
CL Of Rotation (6.1) (12.2) (18.3) (24.4) (30.5) (36.6) (42.7) (48.8)
Operating Radius From Centerline Of Rotation in Feet (Meters)
Notes:
1. Boom geometry shown is for unloaded condition and crane standing level on firm supporting surface. Boom deflection, subsequent
radius, and boom angle change must be accounted for when applying load to hook.
2. Maximum and minimum boom angles are equal to the values listed in the capacity chart for each boom length.
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
Notes:
1. Capacities shown are in kips/metric tons (1 kip = 1,000 lb /
1 metric ton = 0.45 kips) and are not more than 75% of the
tipping loads with the crane standing level on a firm
supporting surface.
2. A deduction must be made from these capacities for the
weight of the main boom hook block or hook ball, jib hook
block or hook ball, slings, grapples, load weighing devices,
etc. When using main hook while jib is attached, reduce
capacities by values shown in Crane Rating Manual. See
Operator's Manual for all limitations when raising or
lowering attachment.
3. The capacities in the shaded areas are based on structural
strength. The capacities in the non-shaded areas are
based on stability ratings.
4. Load ratings are based on freely suspended loads and
make no allowances for such factors as the effect of the
wind, ground conditions, and operating speeds. The
operator shall therefore reduce load ratings in order to
take these conditions into account. Refer to the Crane
Rating Manual for Wind Speed Restrictions.
5. These capacities are for “ABC+A” counterweight.
6. These capacities are for 360° working areas.
7. These capacities are for 30-75 ft (9.15-22.86m) jib
lengths only.
8. The jib cannot be used on boom lengths over 200 ft
(60.96m).
9. The least stable rated condition is over the side.
10. These capacities are in compliance with ASME/ANSI
B30.5 at date of manufacture.
11. These capacities apply only to the crane as originally
manufactured and normally equipped by Link‐Belt
Construction Equipment Company.
270'
60'
260'
60°
45' 250'
240'
30'
230'
50°
220'
200' 210'
190' 200'
40° 190'
160' 170'
150' 160'
30° 150'
Main Boom Length
140'
130' 140'
120' 130'
120'
110'
110'
100' 20°
90' 100'
80' 90'
80'
70'
60' 70'
50' 60'
40' 50'
40'
Minimum Boom Angle 30'
See Note 2.
20'
10'
0'
20' 40' 60' 80' 100' 120' 140' 160' 180' 200' 220' 240' 260' 280'
C
L Of Rotation
Operating Radius From Centerline Of Rotation
Notes:
1. Boom geometry shown is for unloaded condition and crane standing level on firm supporting surface. Boom deflection, subsequent
radius, and boom angle change must be accounted for when applying load to hook.
2. Maximum and minimum boom angles are equal to the values listed in the capacity chart for each boom length.
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
45 ft (13.72m) Offset Jib Length - 360 Rotation - ABC+A [62,820+22,200 lb (28 495+10 070kg)] Counterweight
[All capacities are listed in kips (mt)]
5° Offset 15° Offset 25° Offset
Load Main Boom Length ft (m) Load Main Boom Length ft (m) Load Main Boom Length ft (m)
Radius 40 100 140 180 200 Radius 40 100 140 180 200 Radius 40 100 140 180 200
ft (m) (12.2) (30.5) (42.7) (54.9) (61.0) ft (m) (12.2) (30.5) (42.7) (54.9) (61.0) ft (m) (12.2) (30.5) (42.7) (54.9) (61.0)
30.0 24.0 30.0 30.0
(9.14) (10.90) (9.14) (9.14)
40.0 23.4 24.0 40.0 17.7 40.0 13.5
(12.19) (10.60) (10.90) (12.19) (8.00) (12.19) (6.10)
50.0 17.9 24.0 24.0 24.0 50.0 14.3 19.6 22.1 50.0 11.2 13.7
(15.24) (8.10) (10.90) (10.90) (10.90) (15.24) (6.50) (8.90) (10.00) (15.24) (5.10) (6.20)
60.0 14.5 24.0 24.0 24.0 20.7 60.0 12.0 17.0 19.4 21.4 19.2 60.0 9.7 12.3 13.4
(18.29) (6.60) (10.90) (10.90) (10.90) (9.40) (18.29) (5.40) (7.70) (8.80) (9.70) (8.70) (18.29) (4.40) (5.60) (6.10)
70.0 12.2 20.4 22.8 21.9 20.0 70.0 10.3 14.9 17.3 19.3 18.5 70.0 8.6 11.1 12.3 13.1 13.4
(21.34) (5.50) (9.30) (10.30) (9.90) (9.10) (21.34) (4.70) (6.80) (7.80) (8.80) (8.40) (21.34) (3.90) (5.00) (5.60) (5.90) (6.10)
80.0 10.6 17.7 19.0 18.1 17.7 80.0 9.2 13.4 15.6 17.5 17.8 80.0 10.2 11.3 12.2 12.6
(24.38) (4.80) (8.00) (8.60) (8.20) (8.00) (24.38) (4.20) (6.10) (7.10) (7.90) (8.10) (24.38) (4.60) (5.10) (5.50) (5.70)
90.0 15.6 16.1 15.2 14.8 90.0 12.1 14.2 15.6 15.2 90.0 9.4 10.6 11.4 11.8
(27.43) (7.10) (7.30) (6.90) (6.70) (27.43) (5.50) (6.40) (7.10) (6.90) (27.43) (4.30) (4.80) (5.20) (5.40)
100.0 13.9 13.9 13.0 12.5 100.0 11.1 13.1 13.3 12.9 100.0 8.8 9.9 10.8 11.2
(30.48) (6.30) (6.30) (5.90) (5.70) (30.48) (5.00) (5.90) (6.00) (5.90) (30.48) (4.00) (4.50) (4.90) (5.10)
110.0 12.6 12.0 11.1 10.7 110.0 10.2 12.1 11.4 11.0 110.0 8.3 9.4 10.2 10.6
(33.53) (5.70) (5.40) (5.00) (4.90) (33.53) (4.60) (5.50) (5.20) (5.00) (33.53) (3.80) (4.30) (4.60) (4.80)
120.0 11.4 10.5 9.6 9.2 120.0 9.6 10.7 9.9 9.5 120.0 8.9 9.7 9.7
(36.58) (5.20) (4.80) (4.40) (4.20) (36.58) (4.40) (4.90) (4.50) (4.30) (36.58) (4.00) (4.40) (4.40)
130.0 10.2 9.3 8.4 7.9 130.0 9.5 8.6 8.2 130.0 8.5 8.8 8.4
(39.62) (4.60) (4.20) (3.80) (3.60) (39.62) (4.30) (3.90) (3.70) (39.62) (3.90) (4.00) (3.80)
140.0 8.2 7.3 6.8 140.0 8.4 7.5 7.1 140.0 8.1 7.7 7.3
(42.67) (3.70) (3.30) (3.10) (42.67) (3.80) (3.40) (3.20) (42.67) (3.70) (3.50) (3.30)
150.0 7.3 6.4 5.9 150.0 7.4 6.6 6.1 150.0 6.7 6.3
(45.72) (3.30) (2.90) (2.70) (45.72) (3.40) (3.00) (2.80) (45.72) (3.00) (2.90)
160.0 6.5 5.6 5.1 160.0 6.6 5.7 5.3 160.0 5.9 5.5
(48.77) (2.90) (2.50) (2.30) (48.77) (3.00) (2.60) (2.40) (48.77) (2.70) (2.50)
170.0 5.8 4.9 4.4 170.0 5.0 4.6 170.0 5.1 4.7
(51.82) (2.60) (2.20) (2.00) (51.82) (2.30) (2.10) (51.82) (2.30) (2.10)
180.0 4.3 3.8 180.0 4.4 3.9 180.0 4.1
(54.86) (2.00) (1.70) (54.86) (2.00) (1.80) (54.86) (1.90)
190.0 3.7 3.2 190.0 3.8 3.4 190.0
(57.91) (1.70) (1.50) (57.91) (1.70) (1.50) (57.91)
200.0 3.2 2.7 200.0 2.8 200.0
(60.96) (1.50) (1.20) (60.96) (1.30) (60.96)
210.0 2.8 2.2 210.0 2.3 210.0
(64.01) (1.30) (1.00) (64.01) (1.00) (64.01)
220.0 1.7 220.0 220.0
(67.06) (0.80) (67.06) (67.06)
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
60 ft (18.29m) Offset Jib Length - 360 Rotation - ABC+A [62,820+22,200 lb (28 495+10 070kg)] Counterweight
[All capacities are listed in kips (mt)]
5° Offset 15° Offset 25° Offset
Load Main Boom Length ft (m) Load Main Boom Length ft (m) Load Main Boom Length ft (m)
Radius 40 100 140 180 200 Radius 40 100 140 180 200 Radius 40 100 140 180 200
ft (m) (12.2) (30.5) (42.7) (54.9) (61.0) ft (m) (12.2) (30.5) (42.7) (54.9) (61.0) ft (m) (12.2) (30.5) (42.7) (54.9) (61.0)
30.0 23.6 30.0 30.0
(9.14) (10.70) (9.14) (9.14)
40.0 19.0 22.9 40.0 14.3 40.0
(12.19) (8.60) (10.40) (12.19) (6.50) (12.19)
50.0 14.6 21.7 21.6 50.0 11.5 14.7 50.0 9.0
(15.24) (6.60) (9.80) (9.80) (15.24) (5.20) (6.70) (15.24) (4.10)
60.0 11.9 18.2 21.6 19.7 18.1 60.0 9.6 12.8 14.2 60.0 7.7 9.2
(18.29) (5.40) (8.30) (9.80) (8.90) (8.20) (18.29) (4.40) (5.80) (6.40) (18.29) (3.50) (4.20)
70.0 10.0 15.5 20.8 19.1 17.5 70.0 8.3 11.2 12.7 13.9 14.4 70.0 6.7 8.3 8.9
(21.34) (4.50) (7.00) (9.40) (8.70) (7.90) (21.34) (3.80) (5.10) (5.80) (6.30) (6.50) (21.34) (3.00) (3.80) (4.00)
80.0 8.6 13.4 18.8 18.3 17.0 80.0 7.2 10.0 11.5 12.7 13.2 80.0 6.0 7.5 8.2 8.7 9.0
(24.38) (3.90) (6.10) (8.50) (8.30) (7.70) (24.38) (3.30) (4.50) (5.20) (5.80) (6.00) (24.38) (2.70) (3.40) (3.70) (3.90) (4.10)
90.0 7.5 11.8 16.4 15.4 14.9 90.0 6.5 9.1 10.5 11.6 12.1 90.0 5.4 6.9 7.6 8.2 8.4
(27.43) (3.40) (5.40) (7.40) (7.00) (6.80) (27.43) (2.90) (4.10) (4.80) (5.30) (5.50) (27.43) (2.40) (3.10) (3.40) (3.70) (3.80)
100.0 10.5 14.5 13.1 12.6 100.0 8.3 9.6 10.7 11.2 100.0 6.4 7.1 7.7 7.9
(30.48) (4.80) (6.60) (5.90) (5.70) (30.48) (3.80) (4.40) (4.90) (5.10) (30.48) (2.90) (3.20) (3.50) (3.60)
110.0 9.5 13.0 11.2 10.8 110.0 7.6 8.9 9.9 10.4 110.0 6.0 6.7 7.2 7.5
(33.53) (4.30) (5.90) (5.10) (4.90) (33.53) (3.40) (4.00) (4.50) (4.70) (33.53) (2.70) (3.00) (3.30) (3.40)
120.0 8.7 11.8 9.7 9.3 120.0 7.1 8.2 9.3 9.7 120.0 5.7 6.3 6.9 7.1
(36.58) (3.90) (5.40) (4.40) (4.20) (36.58) (3.20) (3.70) (4.20) (4.40) (36.58) (2.60) (2.90) (3.10) (3.20)
130.0 8.0 10.6 8.5 8.0 130.0 6.6 7.7 8.7 8.4 130.0 5.4 6.0 6.5 6.8
(39.62) (3.60) (4.80) (3.90) (3.60) (39.62) (3.00) (3.50) (3.90) (3.80) (39.62) (2.40) (2.70) (2.90) (3.10)
140.0 7.4 9.4 7.4 6.9 140.0 6.2 7.3 7.7 7.3 140.0 5.7 6.2 6.5
(42.67) (3.40) (4.30) (3.40) (3.10) (42.67) (2.80) (3.30) (3.50) (3.30) (42.67) (2.60) (2.80) (2.90)
150.0 6.9 8.3 6.5 6.0 150.0 6.9 6.7 6.3 150.0 5.5 6.0 6.2
(45.72) (3.10) (3.80) (2.90) (2.70) (45.72) (3.10) (3.00) (2.90) (45.72) (2.50) (2.70) (2.80)
160.0 7.4 5.7 5.2 160.0 6.5 5.9 5.5 160.0 5.3 5.7 5.7
(48.77) (3.40) (2.60) (2.40) (48.77) (2.90) (2.70) (2.50) (48.77) (2.40) (2.60) (2.60)
170.0 6.6 5.0 4.5 170.0 6.0 5.2 4.7 170.0 5.3 4.9
(51.82) (3.00) (2.30) (2.00) (51.82) (2.70) (2.40) (2.10) (51.82) (2.40) (2.20)
180.0 5.9 4.4 3.9 180.0 4.5 4.1 180.0 4.7 4.3
(54.86) (2.70) (2.00) (1.80) (54.86) (2.00) (1.90) (54.86) (2.10) (2.00)
190.0 5.3 3.8 3.3 190.0 4.0 3.5 190.0 3.7
(57.91) (2.40) (1.70) (1.50) (57.91) (1.80) (1.60) (57.91) (1.70)
200.0 3.3 2.8 200.0 3.4 3.0 200.0 3.1
(60.96) (1.50) (1.30) (60.96) (1.50) (1.40) (60.96) (1.40)
210.0 2.9 2.3 210.0 2.5 210.0
(64.01) (1.30) (1.00) (64.01) (1.10) (64.01)
220.0 2.5 1.8 220.0 1.9 220.0
(67.06) (1.10) (0.80) (67.06) (0.90) (67.06)
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
75 ft (22.86m) Offset Jib Length - 360 Rotation - ABC+A [62,820+22,200 lb (28 495+10 070kg)] Counterweight
[All capacities are listed in kips (mt)]
5° Offset 15° Offset 25° Offset
Load Main Boom Length ft (m) Load Main Boom Length ft (m) Load Main Boom Length ft (m)
Radius 40 100 140 180 200 Radius 40 100 140 180 200 Radius 40 100 140 180 200
ft (m) (12.2) (30.5) (42.7) (54.9) (61.0) ft (m) (12.2) (30.5) (42.7) (54.9) (61.0) ft (m) (12.2) (30.5) (42.7) (54.9) (61.0)
40.0 16.1 40.0 40.0
(12.19) (7.30) (12.19) (12.19)
50.0 12.5 17.6 17.6 50.0 9.8 50.0
(15.24) (5.70) (8.00) (8.00) (15.24) (4.40) (15.24)
60.0 10.1 14.6 16.9 16.2 15.5 60.0 8.1 10.2 60.0 6.3
(18.29) (4.60) (6.60) (7.70) (7.30) (7.00) (18.29) (3.70) (4.60) (18.29) (2.90)
70.0 8.5 12.4 14.8 15.7 15.0 70.0 6.9 8.9 9.9 10.7 70.0 5.5 6.5
(21.34) (3.90) (5.60) (6.70) (7.10) (6.80) (21.34) (3.10) (4.00) (4.50) (4.90) (21.34) (2.50) (2.90)
80.0 7.2 10.8 12.9 14.9 14.6 80.0 6.0 8.0 8.9 9.7 10.1 80.0 4.8 5.9 6.3 6.6
(24.38) (3.30) (4.90) (5.90) (6.80) (6.60) (24.38) (2.70) (3.60) (4.00) (4.40) (4.60) (24.38) (2.20) (2.70) (2.90) (3.00)
90.0 6.3 9.5 11.4 13.3 14.1 90.0 5.3 7.2 8.1 8.9 9.3 90.0 4.3 5.3 5.8 6.1 6.3
(27.43) (2.90) (4.30) (5.20) (6.00) (6.40) (27.43) (2.40) (3.30) (3.70) (4.00) (4.20) (27.43) (2.00) (2.40) (2.60) (2.80) (2.90)
100.0 5.6 8.5 10.2 11.9 12.7 100.0 4.7 6.5 7.4 8.2 8.6 100.0 3.9 4.9 5.4 5.8 5.9
(30.48) (2.50) (3.90) (4.60) (5.40) (5.80) (30.48) (2.10) (2.90) (3.40) (3.70) (3.90) (30.48) (1.80) (2.20) (2.40) (2.60) (2.70)
110.0 5.0 7.6 9.2 10.8 10.9 110.0 5.9 6.8 7.6 7.9 110.0 4.6 5.0 5.4 5.6
(33.53) (2.30) (3.40) (4.20) (4.90) (4.90) (33.53) (2.70) (3.10) (3.40) (3.60) (33.53) (2.10) (2.30) (2.40) (2.50)
120.0 6.9 8.4 9.8 9.4 120.0 5.5 6.3 7.1 7.4 120.0 4.3 4.7 5.1 5.3
(36.58) (3.10) (3.80) (4.40) (4.30) (36.58) (2.50) (2.90) (3.20) (3.40) (36.58) (2.00) (2.10) (2.30) (2.40)
130.0 6.3 7.7 8.5 8.1 130.0 5.1 5.9 6.6 6.9 130.0 4.0 4.5 4.8 5.0
(39.62) (2.90) (3.50) (3.90) (3.70) (39.62) (2.30) (2.70) (3.00) (3.10) (39.62) (1.80) (2.00) (2.20) (2.30)
140.0 5.8 7.1 7.5 7.0 140.0 4.8 5.5 6.2 6.5 140.0 3.8 4.2 4.6 4.7
(42.67) (2.60) (3.20) (3.40) (3.20) (42.67) (2.20) (2.50) (2.80) (2.90) (42.67) (1.70) (1.90) (2.10) (2.10)
150.0 5.4 6.6 6.5 6.1 150.0 4.5 5.2 5.9 6.2 150.0 4.0 4.4 4.5
(45.72) (2.40) (3.00) (2.90) (2.80) (45.72) (2.00) (2.40) (2.70) (2.80) (45.72) (1.80) (2.00) (2.00)
160.0 5.0 6.2 5.7 5.3 160.0 4.9 5.5 5.6 160.0 3.8 4.2 4.3
(48.77) (2.30) (2.80) (2.60) (2.40) (48.77) (2.20) (2.50) (2.50) (48.77) (1.70) (1.90) (2.00)
170.0 5.8 5.0 4.6 170.0 4.7 5.3 4.9 170.0 3.7 4.0 4.1
(51.82) (2.60) (2.30) (2.10) (51.82) (2.10) (2.40) (2.20) (51.82) (1.70) (1.80) (1.90)
180.0 5.3 4.4 4.0 180.0 4.4 4.7 4.2 180.0 3.9 4.0
(54.86) (2.40) (2.00) (1.80) (54.86) (2.00) (2.10) (1.90) (54.86) (1.80) (1.80)
190.0 4.8 3.9 3.4 190.0 4.3 4.1 3.6 190.0 3.7 3.9
(57.91) (2.20) (1.80) (1.50) (57.91) (2.00) (1.90) (1.60) (57.91) (1.70) (1.80)
200.0 4.3 3.4 2.9 200.0 3.6 3.1 200.0 3.6 3.3
(60.96) (2.00) (1.50) (1.30) (60.96) (1.60) (1.40) (60.96) (1.60) (1.50)
210.0 2.9 2.3 210.0 3.1 2.6 210.0 2.8
(64.01) (1.30) (1.00) (64.01) (1.40) (1.20) (64.01) (1.30)
220.0 2.5 1.8 220.0 2.7 2.1 220.0
(67.06) (1.10) (0.80) (67.06) (1.20) (1.00) (67.06)
230.0 2.1 230.0 230.0
(70.10) (1.00) (70.10) (70.10)
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
80 24.4 1 1 1 1 1
90 27.4 1 1 1 1 1
100 30.5 1 1 1 1 1 1
110 33.5 1 1 2 1 1
120 36.6 1 1 1 2 1 1
130 39.6 1 1 1 1 1 1 1
140 42.7 1 1 2 1 1 1
150 45.7 1 1 1 2 1 1 1
110' 45°
90'
70'
0°
140’ 140’
120’ 120’
0°
80’ 80’
60’ 60’
20’ 20’
20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’
Notes: CL Rotation Operating Radius
1. Boom geometry shown is for unloaded condition and crane standing level on firm supporting surface. Boom deflection, subsequent
radius, and boom angle change must be accounted for when applying load to hook.
2. Maximum and minimum boom angles are equal to the values listed in the capacity chart for each boom length.
3. Refer to the Capacity Charts for allowable luffing boom and luffing jib combinations.
0’ 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 220’
300’ 300’
280’ 280’
260’ 260’
50°
240’ 45° 240’
80' 180’
180’
140’ 140’
0°
120’ 120’
100’ 100’
80' Luff Boom
Minimum 50' 60' 80' 100' 120' 140'
80’ 80’
0°
60’ 60’
40’ 40’
65°
20’ 20’
0’
20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 220’
CL Rotation Operating Radius
Notes:
1. Boom geometry shown is for unloaded condition and crane standing level on firm supporting surface. Boom deflection, subsequent
radius, and boom angle change must be accounted for when applying load to hook.
2. Maximum and minimum boom angles are equal to the values listed in the capacity chart for each boom length.
3. Refer to the Capacity Charts for allowable luffing boom and luffing jib combinations.
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
80 ft (24.4m) Luffing Boom Length - 360 Rotation - ABC+A [62,820+22,200 lb (28 495+10 070kg)] Counterweight
[All capacities are listed in kips (mt)]
120 ft (36.6m) Luffing Jib Length 140 ft (42.7m) Luffing Jib Length
Load Luffing Boom Angle Load Luffing Boom Angle
Radius Radius
ft (m) 90° 85° 80° 75° 70° 65° ft (m) 90° 85° 80° 75° 70° 65°
40 19.5 50 13.9
(12.2) (8.8) (15.2) (6.3)
50 17.2 60 12.2
(15.2) (7.8) (18.3) (5.5)
60 15.2 16.3 70 10.8 11.6
(18.3) (6.9) (7.4) (21.3) (4.9) (5.3)
70 13.4 14.4 80 9.5 10.2
(21.3) (6.1) (6.5) (24.4) (4.3) (4.6)
80 11.8 12.8 13.7 90 8.2 9.0 9.6
(24.4) (5.4) (5.8) (6.2) (27.4) (3.7) (4.1) (4.4)
90 10.3 11.3 12.2 13.0 100 7.2 7.9 8.5 9.1
(27.4) (4.7) (5.1) (5.5) (5.9) (30.5) (3.3) (3.6) (3.9) (4.1)
100 9.0 10.0 10.9 11.6 110 6.2 6.9 7.5 8.1
(30.5) (4.1) (4.5) (4.9) (5.3) (33.5) (2.8) (3.1) (3.4) (3.7)
110 7.9 8.8 9.6 10.4 10.7 120 5.3 5.9 6.6 7.1 7.6
(33.5) (3.6) (4.0) (4.4) (4.7) (4.9) (36.6) (2.4) (2.7) (3.0) (3.2) (3.4)
120 6.9 7.7 8.5 9.3 9.4 8.9 130 4.5 5.1 5.7 6.3 6.7
(36.6) (3.1) (3.5) (3.9) (4.2) (4.3) (4.0) (39.6) (2.0) (2.3) (2.6) (2.9) (3.0)
130 6.7 7.4 8.2 8.4 7.9 140 3.8 4.4 4.9 5.5 6.0 6.4
(39.6) (3.0) (3.4) (3.7) (3.8) (3.6) (42.7) (1.7) (2.0) (2.2) (2.5) (2.7) (2.9)
140 6.5 7.2 7.6 7.1 150 3.6 4.2 4.7 5.3 5.7
(42.7) (2.9) (3.3) (3.4) (3.2) (45.7) (1.6) (1.9) (2.1) (2.4) (2.6)
150 6.3 6.8 6.4 160 3.5 4.1 4.6 5.0
(45.7) (2.9) (3.1) (2.9) (48.8) (1.6) (1.9) (2.1) (2.3)
160 5.8 170 3.4 3.9 4.4
(48.8) (2.6) (51.8) (1.5) (1.8) (2.0)
180 3.8
(54.9) (1.7)
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
100 ft (30.5m) Luffing Boom Length - 360 Rotation - ABC+A [62,820+22,200 lb (28 495+10 070kg)] Counterweight
[All capacities are listed in kips (mt)]
50 ft (15.2m) Luffing Jib Length 100 ft (30.5m) Luffing Jib Length
Load Luffing Boom Angle Load Luffing Boom Angle
Radius Radius
ft (m) 90° 85° 80° 75° 70° 65° ft (m) 90° 85° 80° 75° 70° 65°
25 45.8 35 24.3
(7.6) (20.8) (10.7) (11.0)
30 41.4 40 23.0
(9.1) (18.8) (12.2) (10.4)
35 38.0 44.5 50 20.3
(10.7) (17.2) (20.2) (15.2) (9.2)
40 36.3 40.2 60 17.9 19.6
(12.2) (16.5) (18.2) (18.3) (8.1) (8.9)
50 34.9 34.6 33.2 70 15.8 17.4 19.0
(15.2) (15.8) (15.7) (15.1) (21.3) (7.2) (7.9) (8.6)
60 28.1 26.7 25.3 80 13.9 15.5 17.0
(18.3) (12.7) (12.1) (11.5) (24.4) (6.3) (7.0) (7.7)
70 22.1 20.9 90 12.2 13.7 15.2 14.5
(21.3) (10.0) (9.5) (27.4) (5.5) (6.2) (6.9) (6.6)
80 17.7 16.7 100 10.8 12.1 13.5 12.6 11.6
(24.4) (8.0) (7.6) (30.5) (4.9) (5.5) (6.1) (5.7) (5.3)
90 14.4 13.6 110 10.7 11.9 11.1 10.3
(27.4) (6.5) (6.2) (33.5) (4.9) (5.4) (5.0) (4.7)
100 11.8 120 10.6 9.9 9.2 8.5
(30.5) (5.4) (36.6) (4.8) (4.5) (4.2) (3.9)
130 8.9 8.2 7.6
(39.6) (4.0) (3.7) (3.4)
140 7.4 6.8
(42.7) (3.4) (3.1)
150 6.1
(45.7) (2.8)
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
100 ft (30.5m) Luffing Boom Length - 360 Rotation - ABC+A [62,820+22,200 lb (28 495+10 070kg)] Counterweight
[All capacities are listed in kips (mt)]
120 ft (36.6m) Luffing Jib Length 140 ft (42.7m) Luffing Jib Length
Load Luffing Boom Angle Load Luffing Boom Angle
Radius Radius
ft (m) 90° 85° 80° 75° 70° 65° ft (m) 90° 85° 80° 75° 70° 65°
40 18.7 50 13.3
(12.2) (8.5) (15.2) (6.0)
50 16.6 60 11.7
(15.2) (7.5) (18.3) (5.3)
60 14.7 16.0 70 10.3 11.3
(18.3) (6.7) (7.3) (21.3) (4.7) (5.1)
70 13.0 14.2 80 9.1 10.0
(21.3) (5.9) (6.4) (24.4) (4.1) (4.5)
80 11.4 12.6 13.8 90 7.9 8.8 9.7
(24.4) (5.2) (5.7) (6.3) (27.4) (3.6) (4.0) (4.4)
90 10.0 11.2 12.3 100 6.9 7.8 8.5
(27.4) (4.5) (5.1) (5.6) (30.5) (3.1) (3.5) (3.9)
100 8.8 9.9 10.9 11.9 110 5.9 6.8 7.6 8.2
(30.5) (4.0) (4.5) (4.9) (5.4) (33.5) (2.7) (3.1) (3.4) (3.7)
110 7.7 8.7 9.7 10.6 120 5.1 5.9 6.7 7.3
(33.5) (3.5) (3.9) (4.4) (4.8) (36.6) (2.3) (2.7) (3.0) (3.3)
120 6.7 7.6 8.6 9.5 8.8 130 4.3 5.0 5.8 6.5 7.0
(36.6) (3.0) (3.4) (3.9) (4.3) (4.0) (39.6) (2.0) (2.3) (2.6) (2.9) (3.2)
130 6.6 7.6 8.5 7.8 7.2 140 3.6 4.3 5.0 5.7 6.3
(39.6) (3.0) (3.4) (3.9) (3.5) (3.3) (42.7) (1.6) (2.0) (2.3) (2.6) (2.9)
140 6.6 7.5 7.0 6.4 150 3.6 4.3 4.9 5.6 5.4
(42.7) (3.0) (3.4) (3.2) (2.9) (45.7) (1.6) (2.0) (2.2) (2.5) (2.4)
150 6.6 6.3 5.8 160 3.6 4.2 4.8 4.8
(46.0) (3.0) (2.9) (2.6) (48.8) (1.6) (1.9) (2.2) (2.2)
160 5.7 5.2 170 3.6 4.2 4.3
(48.8) (2.6) (2.4) (51.8) (1.6) (1.9) (2.0)
170 4.7 180 3.6 3.9
(51.8) (2.1) (54.9) (1.6) (1.8)
190 3.5
(57.9) (1.6)
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
120 ft (36.6m) Luffing Boom Length - 360 Rotation - ABC+A [62,820+22,200 lb (28 495+10 070kg)] Counterweight
[All capacities are listed in kips (mt)]
50 ft (15.2m) Luffing Jib Length 100 ft (30.5) Luffing Jib Length
Load Luffing Boom Angle Load Luffing Boom Angle
Radius Radius
ft (m) 90° 85° 80° 75° 70° 65° ft (m) 90° 85° 80° 75° 70° 65°
25 45.0 35 23.2
(7.6) (20.4) (10.7) (10.5)
30 40.8 40 22.0
(9.1) (18.5) (12.2) (10.0)
35 37.6 50 19.5
(10.7) (17.1) (15.2) (8.8)
40 35.9 41.2 60 17.3 19.3
(12.2) (16.3) (18.7) (18.3) (7.8) (8.8)
50 34.1 34.7 70 15.3 17.1
(15.2) (15.5) (15.7) (21.3) (6.9) (7.8)
60 27.9 26.1 80 13.5 15.3 17.0
(18.3) (12.7) (11.8) (24.4) (6.1) (6.9) (7.7)
70 23.0 21.6 20.1 90 11.9 13.5 15.0 13.7
(21.3) (10.4) (9.8) (9.1) (27.4) (5.4) (6.1) (6.8) (6.2)
80 18.2 17.0 15.7 100 10.5 12.0 13.1 12.0
(24.4) (8.3) (7.7) (7.1) (30.5) (4.8) (5.4) (5.9) (5.4)
90 14.6 13.6 110 10.6 11.6 10.6 9.6
(27.4) (6.6) (6.2) (33.5) (4.8) (5.3) (4.8) (4.4)
100 11.8 10.9 120 9.3 10.3 9.4 8.5
(30.5) (5.4) (4.9) (36.6) (4.2) (4.7) (4.3) (3.9)
110 9.6 130 9.2 8.4 7.6 6.8
(33.5) (4.4) (39.6) (4.2) (3.8) (3.4) (3.1)
140 7.5 6.8 6.1
(42.7) (3.4) (3.1) (2.8)
150 6.1 5.5
(45.7) (2.8) (2.5)
160 4.9
(48.8) (2.2)
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
120 ft (36.6m) Luffing Boom Length - 360 Rotation - ABC+A [62,820+22,200 lb (28 495+10 070kg)] Counterweight
[All capacities are listed in kips (mt)]
120 ft (36.6m) Luffing Jib Length 140 ft (42.7m) Luffing Jib Length
Load Luffing Boom Angle Load Luffing Boom Angle
Radius Radius
ft (m) 90° 85° 80° 75° 70° 65° ft (m) 90° 85° 80° 75° 70° 65°
40 17.8 50 12.6
(12.2) (8.1) (15.2) (5.7)
50 15.8 60 11.1
(15.2) (7.2) (18.3) (5.0)
60 14.0 70 9.8 11.0
(18.3) (6.4) (21.3) (4.4) (5.0)
70 12.5 13.9 80 8.7 9.7
(21.3) (5.7) (6.3) (24.4) (3.9) (4.4)
80 11.0 12.3 90 7.6 8.6 9.6
(24.4) (5.0) (5.6) (27.4) (3.4) (3.9) (4.4)
90 9.7 11.0 12.2 100 6.6 7.6 8.5
(27.4) (4.4) (5.0) (5.5) (30.5) (3.0) (3.4) (3.9)
100 8.5 9.7 10.9 11.6 110 5.7 6.6 7.5 8.3
(30.5) (3.9) (4.4) (4.9) (5.3) (33.5) (2.6) (3.0) (3.4) (3.8)
110 7.4 8.6 9.7 10.2 120 4.9 5.8 6.7 7.4
(33.5) (3.4) (3.9) (4.4) (4.6) (36.6) (2.2) (2.6) (3.0) (3.4)
120 6.5 7.5 8.6 9.0 8.1 130 4.1 5.0 5.8 6.6 6.8
(36.6) (2.9) (3.4) (3.9) (4.1) (3.7) (39.6) (1.9) (2.3) (2.6) (3.0) (3.1)
130 6.6 7.6 8.0 7.2 140 3.5 4.2 5.0 5.8 6.0
(39.6) (3.0) (3.4) (3.6) (3.3) (42.7) (1.6) (1.9) (2.3) (2.6) (2.7)
140 5.7 6.7 7.2 6.4 5.7 150 3.6 4.3 5.1 5.4 4.7
(42.7) (2.6) (3.0) (3.3) (2.9) (2.6) (45.7) (1.6) (2.0) (2.3) (2.4) (2.1)
150 5.8 6.5 5.8 5.1 160 2.9 3.7 4.4 4.8 4.2
(45.7) (2.6) (2.9) (2.6) (2.3) (48.8) (1.3) (1.7) (2.0) (2.2) (1.9)
160 5.9 5.2 4.6 170 3.0 3.7 4.3 3.7
(48.8) (2.7) (2.4) (2.1) (51.8) (1.4) (1.7) (2.0) (1.7)
170 4.7 4.1 180 3.1 3.8 3.3
(51.8) (2.1) (1.9) (54.9) (1.4) (1.7) (1.5)
180 3.7 190 3.2 3.0
(54.9) (1.7) (57.9) (1.5) (1.4)
200 2.6
(61.0) (1.2)
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
140 ft (42.7m) Luffing Boom Length - 360 Rotation - ABC+A [62,820+22,200 lb (28 495+10 070kg)] Counterweight
[All capacities are listed in kips (mt)]
50 ft (15.2m) Luffing Jib Length 100 ft (30.5m) Luffing Jib Length
Load Luffing Boom Angle Load Luffing Boom Angle
Radius Radius
ft (m) 90° 85° 80° 75° 70° 65° ft (m) 90° 85° 80° 75° 70° 65°
25 41.1 35 21.9
(7.6) (18.6) (10.7) (9.9)
30 38.6 40 20.9
(9.1) (17.5) (12.2) (9.5)
35 36.3 50 18.5
(10.7) (16.5) (15.2) (8.4)
40 34.3 38.5 60 16.5 18.7
(12.2) (15.6) (17.5) (18.3) (7.5) (8.5)
50 29.8 33.5 70 14.6 16.6
(15.2) (13.5) (15.2) (21.3) (6.6) (7.5)
60 27.6 25.3 80 12.9 14.9 16.8
(18.3) (12.5) (11.5) (24.4) (5.9) (6.8) (7.6)
70 22.7 21.0 19.0 90 11.5 13.2 14.5
(21.3) (10.3) (9.5) (8.6) (27.4) (5.2) (6.0) (6.6)
80 17.7 16.2 100 10.1 11.8 12.6 11.3
(24.4) (8.0) (7.3) (30.5) (4.6) (5.4) (5.7) (5.1)
90 14.0 12.6 110 10.4 11.2 9.9
(27.4) (6.4) (5.7) (33.5) (4.7) (5.1) (4.5)
100 11.0 9.8 120 9.2 9.9 8.8 7.7
(30.5) (5.0) (4.4) (36.6) (4.2) (4.5) (4.0) (3.5)
110 8.7 130 8.9 7.9 6.9
(33.5) (3.9) (39.6) (4.0) (3.6) (3.1)
140 7.1 6.1 5.3
(42.7) (3.2) (2.8) (2.4)
150 5.5 4.7
(45.7) (2.5) (2.1)
160 4.2
(48.8) (1.9)
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
140 ft (42.7m) Luffing Boom Length - 360 Rotation - ABC+A [62,820+22,200 lb (28 495+10 070kg)] Counterweight
[All capacities are listed in kips (mt)]
120 ft (36.6m) Luffing Jib Length 140 ft (42.7m) Luffing Jib Length
Load Luffing Boom Angle Load Luffing Boom Angle
Radius Radius
ft (m) 90° 85° 80° 75° 70° 65° ft (m) 90° 85° 80° 75° 70° 65°
40 16.7 50 11.8
(12.2) (7.6) (15.2) (5.4)
50 14.9 60 10.4
(15.2) (6.8) (18.3) (4.7)
60 13.3 70 9.3 10.5
(18.3) (6.0) (21.3) (4.2) (4.8)
70 11.8 13.4 80 8.2 9.3
(21.3) (5.4) (6.1) (24.4) (3.7) (4.2)
80 10.5 11.9 90 7.2 8.3
(24.4) (4.8) (5.4) (27.4) (3.3) (3.8)
90 9.2 10.7 12.0 100 6.2 7.3 8.3
(27.4) (4.2) (4.9) (5.4) (30.5) (2.8) (3.3) (3.8)
100 8.1 9.5 10.8 110 5.4 6.4 7.4
(30.5) (3.7) (4.3) (4.9) (33.5) (2.4) (2.9) (3.4)
110 7.1 8.4 9.7 9.5 120 4.6 5.6 6.6 7.4
(33.5) (3.2) (3.8) (4.4) (4.3) (36.6) (2.1) (2.5) (3.0) (3.4)
120 6.2 7.4 8.6 8.4 130 3.9 4.8 5.8 6.6
(36.6) (2.8) (3.4) (3.9) (3.8) (39.6) (1.8) (2.2) (2.6) (3.0)
130 6.5 7.6 7.5 6.5 140 3.3 4.1 5.0 5.9 5.4
(39.6) (2.9) (3.4) (3.4) (2.9) (42.7) (1.5) (1.9) (2.3) (2.7) (2.4)
140 5.6 6.7 6.7 5.8 150 3.5 4.3 5.1 4.8
(42.7) (2.5) (3.0) (3.0) (2.6) (45.7) (1.6) (2.0) (2.3) (2.2)
150 5.9 6.0 5.2 4.3 160 2.9 3.7 4.4 4.2 3.4
(45.7) (2.7) (2.7) (2.4) (2.0) (48.8) (1.3) (1.7) (2.0) (1.9) (1.5)
160 5.4 4.6 3.8 170 3.1 3.8 3.8 2.9
(48.8) (2.4) (2.1) (1.7) (51.8) (1.4) (1.7) (1.7) (1.3)
170 4.1 3.4 180 3.2 3.4 2.5
(51.8) (1.9) (1.5) (54.9) (1.5) (1.5) (1.1)
180 3.0 190 3.0 2.1
(54.9) (1.4) (57.9) (1.4) (1.0)
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
150 ft (45.7m) Luffing Boom Length - 360 Rotation - ABC+A [62,820+22,200 lb (28 495+10 070kg)] Counterweight
[All capacities are listed in kips (mt)]
80 ft (24.4m) Luffing Jib Length 100 ft (30.5m) Luffing Jib Length
Load Luffing Boom Angle Load Luffing Boom Angle
Radius Radius
ft (m) 90° 85° 80° 75° 70° 65° ft (m) 90° 85° 80° 75° 70° 65°
30 25.2 35 19.3
(9.1) (11.4) (10.7) (8.8)
35 23.8 40 18.3
(10.7) (10.8) (12.2) (8.3)
40 22.5 50 16.2
(12.2) (10.2) (15.2) (7.3)
50 19.9 23.0 60 14.3 16.4
(15.2) (9.0) (10.4) (18.3) (6.5) (7.4)
60 17.5 20.3 70 12.6 14.6
(18.3) (7.9) (9.2) (21.3) (5.7) (6.6)
70 15.4 18.0 20.0 80 11.1 13.0 14.8
(21.3) (7.0) (8.2) (9.1) (24.4) (5.0) (5.9) (6.7)
80 13.5 15.9 17.0 90 9.7 11.5 13.2
(24.4) (6.1) (7.2) (7.7) (27.4) (4.4) (5.2) (6.0)
90 14.1 14.6 13.0 100 8.5 10.1 11.9 10.9
(27.4) (6.4) (6.6) (5.9) (30.5) (3.9) (4.6) (5.4) (4.9)
100 12.4 12.8 11.3 110 8.9 10.5 9.6
(30.5) (5.6) (5.8) (5.1) (33.5) (4.0) (4.8) (4.4)
110 11.3 10.0 8.7 120 7.8 9.3 8.5 7.3
(33.5) (5.1) (4.5) (3.9) (36.6) (3.5) (4.2) (3.9) (3.3)
120 8.9 7.7 130 8.2 7.6 6.5
(36.6) (4.0) (3.5) (39.6) (3.7) (3.4) (2.9)
130 6.9 5.9 140 6.8 5.8 4.8
(39.6) (3.1) (2.7) (42.7) (3.1) (2.6) (2.2)
140 6.1 5.2 150 5.2 4.3
(42.7) (2.8) (2.4) (45.7) (2.4) (2.0)
150 4.7 160 4.7 3.8
(45.7) (2.1) (48.8) (2.1) (1.7)
170 3.4
(51.8) (1.5)
This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.
13' 2”
(4.01m)
10' 11”
(3.33m)