Professional Documents
Culture Documents
com/CBEALBN-BBY
CARTRIDGE CONFIGURATION
L Control Standard Screw
Adjustment
MANIFOLD CONFIGURATION
(none) Modifier 6061-T651 Aluminum,
Buna-N
Counterbalance valves with pilot assist are meant to control an overrunning load. The check valve allows free flow from
NOTES the directional valve (port 2) to the load (port 1) while a direct-acting, pilot-assisted relief valve controls flow from port 1 to
Important: Carefully consider the maximum system port 2. Pilot assist at port 3 lowers the effective setting of the relief valve at a rate determined by the pilot ratio.
pressure. The pressure rating of the manifold is
dependent on the manifold material, with the port Other names for this valve include motion control valve and over-center valve.
type/size a secondary consideration. Manifolds
constructed of aluminum are not rated for pressures CARTRIDGE TECHNICAL DATA
higher than 3000 psi (210 bar), regardless of the port
type/size specified. Cavity T-2A
Series 2
Capacity 30 gpm
Interface ISO 05
Open Cavities 2
Cavity T-2A
ASSEMBLY FACES
FACE GRID
1 2 3 4
5 6 7 8
9 10 11 12
Face 2
Face 5
Face 6
Face 7
Face 8
Face 10