The document describes an emergency exit combo sign with LED exit letters and two side-mounted incandescent emergency lighting heads. The sign has a thermoplastic housing, is self-powered, and is UL listed. It has a maintenance-free sealed lead battery that provides a minimum of 1.5 hours of emergency power. The sign's LED lamps provide energy savings while the incandescent heads provide emergency lighting during power outages.
The document describes an emergency exit combo sign with LED exit letters and two side-mounted incandescent emergency lighting heads. The sign has a thermoplastic housing, is self-powered, and is UL listed. It has a maintenance-free sealed lead battery that provides a minimum of 1.5 hours of emergency power. The sign's LED lamps provide energy savings while the incandescent heads provide emergency lighting during power outages.
The document describes an emergency exit combo sign with LED exit letters and two side-mounted incandescent emergency lighting heads. The sign has a thermoplastic housing, is self-powered, and is UL listed. It has a maintenance-free sealed lead battery that provides a minimum of 1.5 hours of emergency power. The sign's LED lamps provide energy savings while the incandescent heads provide emergency lighting during power outages.
Thermoplastic Housing Self Powered LED EXIT section, Incandescent Heads
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
DESCRIPTION APPROVALS ELECTRICAL/BATTERY
The EEC-LR-2S (LED Red) and UL924. Dual voltage input 120/277 VAC, 60 Hz. EEC-LG-2S (LED Green) are economical and UL listed for damp locations use. Maintenance free, Sealed Lead Calcium energy saving Exit signs with two, Side Life Safety NFPA 101. 6V, 4.5 AH battery with a maximum full mounted emergency lighting heads. The recharge time of 24 hours. Minimum 1 injection molded plastic housing has soft HOUSING ½ hour emergency operation. rounded corners for aesthetic appeal. The Exit The housing is made of injection molded Low voltage disconnect of the battery signs’ LED lamps provide a maximum of thermoplastic making it impact resistant and prevents deep discharge and maintains energy savings potential and the battery pack corrosion proof. UL94-5V rated. good battery life. allows the unit to be Self Powered during Fully automatic, solid state charger. power outages. MOUNTING Test switch with LED charge Easy snap fit canopy can be used for top indicator/AC voltage indicator. APPLICATION mounting or knockouts can be used for surface Line latching feature prevents the unit Suitable for use in almost any commercial or mounting. Included second face allows the from turning on during installation to a light industrial application. Ideal for mounting unit to be used as a single or double face exit non-energized AC circuit. Saves labor in the limited space available above doorways. sign. Snap fitting, replaceable chevrons for since the installer does not have to direction indication. return to connect the battery terminals OPTIONS once the building is energized. BLK – Black Housing. LAMPS SD – Self Diagnotics Long life Light Emitting Diode (LED) lamps in SAL – SALIDA version for Latin American the Exit sign portion provide the maximum in markets. energy savings. The emergency lighting heads have 2 x 5.4 W incandescent lamps.
EEC- LR- 2S- __
Product Series Lamp Type Heads Options EEC = Emergency LR = LED Red, incandescent heads 2S = 2 Side (blank) = EXIT letters EXIT LG = LED Green, incandescent heads mounted heads SAL = SALIDA letters Combo BLK = Black housing SD = Self Diagnostics
Lumenform Lighting, Inc. Specifications and Dimensions subject to change without notice. www.lumenform.com